SKU: 16190533237

Makita HR 003 GM101 Akku Kombihammer 40 V max. 2,8 J SDS plus Brushless + 1x Akku 4,0 Ah + Makpac - ohne Ladegerät

$253.97 $282.19
Save 10%
No.2 Bestseller on martinetexier.com >

Pay in installments of $70.55 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 10 - Aug 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Makita HR 003 GM101 Akku Kombihammer 40 V max. 2,8 J SDS plus Brushless + 1x Akku 4,0 Ah + Makpac - ohne LadegerätLieferumfang: 1x Makita HR 003 G Akku Kombihammer 1x Tiefenanschlag ( 331886 4 ) 1x Seitengriff ( 126882 3 ) 1x Bohrer Meiel Fett ( 198993 4 ) 1x Makita BL 4040 40 V max. 4,0 Ah Akku 1x Makita Makpac 1x passende Einlage ohne Ladegert Produktbeschreibung: Der Makita HR 003 G Akku Kombihammer ist ein sehr robust verarbeiteter Bohrhammer der fr hchste Ansprche konzipiert wurde. Dank der 40 Volt XGT Technologie kann die Power der Gertes ber eine lange

Lieferumfang:

- 1x Makita HR 003 G Akku Kombihammer
- 1x Tiefenanschlag ( 331886-4 )
- 1x Seitengriff ( 126882-3 )
- 1x Bohrer-/ Meißel Fett ( 198993-4 )
- 1x Makita BL 4040 40 V max. 4,0 Ah Akku
- 1x Makita Makpac
- 1x passende Einlage
- ohne Ladegerät

Produktbeschreibung:

Der Makita HR 003 G Akku Kombihammer ist ein sehr robust verarbeiteter Bohrhammer der für höchste Ansprüche konzipiert wurde. Dank der 40 Volt XGT Technologie kann die Power der Gerätes über eine lange Laufzeit konstant aufrecht gehalten werden. Durch die SDS plus Werkzeugaufnahme sind Ersatzwerkzeuge wie zum Beispiel Meißel oder Bohrer in allen erdenklichen Größen und Formen auf dem Markt verfügbar. Dank der Drehstopp Funktion des HR 003 sind auch leichte Meißelarbeiten problemlos möglich. Die verbaute AVT Technologie ( Anti Vibration Technology ) reduziert zuverlässig Vibrationen und ist somit gesundheitsschonend für den Anwender. Des Weiteren verfügt der Akku Bohrhammer über eine Motorbremse, einen Rechts-/Links Lauf und über eine LED für schlecht belichtete Arbeitsbereiche. Die XPT Technologie ( Extreme Protection Technology ) verhindert zuverlässig das Eindringen von Schmutz und Spritzwasser. Der bürstenlose Motor ( Brushless ) sorgt für mehr Leistung und lässt eine kompaktere Bauweise zu. Zusammengefasst ist der Akku Kombihammer dank neuester Technik und dem XGT System ein Kombihammer für höchste Ansprüche. Makita ist ein führender Hersteller von Elektrowerkzeugen, eine lange Tradition und höchste Qualitätsansprüche zeichnen das Unternehmen aus.

Technische Daten:

Hersteller: Makita
Herstellerbezeichnung: HR 003 G
Spannung: 40 V max.
Einschlagstärke: 2,8 J
Werkzeugaufnahme: SDS plus
Motor Produktart: bürstenlos (brushless)
Leerlaufdrehzahl: 0-980 min⁻¹
Leerlaufschlagzahl: 0-5000 min⁻¹
Bohrleistung in Holz: 32 mm
Bohrleistung in Mauerwerk: 28 mm
Bohrleistung in Stahl: 13 mm
Idealer Bohrbereich (Beton): 10 - 18 mm
Bohrleistung Bohrkrone: 54 mm
Schallleistungspegel (LWA): 106 dB(A)
Schalldruckpegel (LpA): 95 dB(A)
K-Wert Geräusch: 3 dB(A)
Vibration: 2,5 m/s²
Vibration Hammerbohren in Beton: 7,0 m/s²
Vibration Meisseln mit Seitengriff: 6,5 m/s²
K-Wert Vibration: 1,5 m/s²


Bei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 16190533237

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 14 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
E
Verified Purchase
Eric Caldeira
Louisville, US
★★★★★ 5
I wish I had Siless 20 years ago!!!
Model: SLH20025, Model: SLH20025
I have installed all kinds of insulation in vehicles over many years. I only needed to purchase 2 boxes to complete the entire interior siding of my 2025 chevy express, what a great value! I wanted to insulate my locksmith van for sound and heat. The sound reduction virtually eliminated the road noise. These panels also look amazing. It got up to 110F in the sun with the doors closed. After adding Siless insulation the temperature maxed out at 97F. That is a massive difference. Plus, I didn't even finish with the roof before testing. Siless Hybrid 3in1 was extremely easy to cut and adhere onto metal panels. I'm impressed with the quality of the individual panels and the adhesive is not toxic smelling compared to some others. My favorite thing about these panels is you can actually take them off and readjust them before they finally stick and they do not leave any black residue behind when you pull them up to adjust them. All I needed was a heat gun, knife and a roller to complete this job. The size of each panel is perfect, you can handle them with ease. I probably won't need your product again for a while, but when I do I will definitely be back.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 21, 2025
M
Verified Purchase
Mark Kadrich
Lowell, US
★★★★★ 5
Works well and is easy to install.
Model: SLH20025, Model: SLH20025
I was sound and heat insulating a generator bay in my class A RV so I did three tests before and during material application: I did a sound level test to see how effective the material was for my application, a "stickiness" test, and a flammability test. This was indoors on a dry 78°F day. From beginning to end, the entire process, including testing, took 5 hours to install 25 sqft or material in a very complex area. One hour for cleaning, 3 hours for installation, and 1 hour for test setup and testing. Using a sound meter, I took before and after readings and determined that I reduced the sound level by 2.2 db (40% energy decrease) with a noticeable decrease in sound and frequency. The generator bay is located under the master bedroom in the aft portion of the coach. The sound went from a rattling, vibrating generator noise to a more tolerable low level rumble. The material was easy to apply. I did some testing prior to application and determined that surface preparation is key. I cleaned my painted metal surface and then degreased with acetone and the material stuck well. Be careful and purposeful when you apply the material because once it was stuck to the metal, it was quite difficult to remove or reposition. Since it was going to be installed into a gasoline powered generator bay located under our sleeping quarters, I did some flame testing to determine the level of risk. Although not highly flammable after installation, my testing revealed that the PE used will catch on fire under certain circumstances. In order to reduce the risk, I used aluminized duct tape to ensure that all the edges were sealed and the PE was not exposed to direct flame in the event of a fire. I also decided to install an automatic fire extinguisher as an added precaution. In all fairness there should be one installed in the generator bay anyway. All in all, I am very satisfied with the product and the results. I have recommended this product to my other RV owner friends.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2025
J
Verified Purchase
Josh
Boise, US
★★★★★ 5
Great product. Best value i could find
Model: SLH20025
I'm using talk to text, so forgive any grammatical and spelling errors. I ordered this product after doing a bit of research on sound dampening materials. I had been doing car stereo for quite some time since my teens. Itook a break for 20 years or so. I'm now 40 and back in the day there was dynamat. And that was about it. as irecently bought a new 2017 F350 crew cab. I wanted to put in a new stereo system and being that it was my dream truck. I was going to put in my dream stereo. But before I could do that, I needed to start with the sound deadening. I looked into today's leading product and found a company called resonx. Had taken their place as king of the hill in sound deadly. I researched their products and found the materials they were built from and Silas was the closest match at the best price I used Silas Max. First, then Silas 3 and 1 hybrid over that on all exterior panels. Then, on the interior panels. I used the 3 and 1 hybrid . on the floor I used Silas Max. Then, the 3 and 1 hybrid, then Silas liner over that the car is incredibly quiet . As far as sound dampening and deadening, it works very well for the money really can't beat it. Do your homework no How and where to apply it? And you really can't go wrong or about $400. I did. What would have cost me easily? Two thousand in other brands highly recommend the product prep work.Is everything do your homework?Do it right and you will be happy with this stuff
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026
W
Verified Purchase
william scott
Lexington, US
★★★★★ 4
Not simple, nor easy
Model: SLH20025
I wanted to add sound proof material to the bare metal areas on the floor of my Toyota Tundra. The area behind the front seats had a haphazard application of sound deadening material. There were several complications to the project which may come up in other vehicles. First is the floor covering which had plastic pillars underneath to support any weight on the cover. The sound deadening material had to be cut out so these pillars would rest on the bare metal of the floor. This required a lot of cutting with a utility knife and at times heavy scissors. The instructions say to make a template before cutting the material and I did this for the driver's side. This doubled the amount of time needed to install it. On the passenger's side I laid the rectangles of material with the backing on and pressed the floor covering onto the material. This showed where the support pillars were, which I then cut out. Second is peeling the backing off the material. This can be very difficult as the adhesive sticks to it. The backing came off in multiple pieces and sometimes took 5 minutes for one piece. They say to wear gloves when handling the material but this is impossible when trying to get the backing off. Third is pressing the material onto the metal. The instructions say to use a roller, but this was impossible for the irregular surface I was working on. The hand is the best tool to press the material on. The material seems to be of high quality and I expect it will reduce the road noise in the cab.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2025
M
Verified Purchase
Mike
Omaha, US
★★★★★ 5
Great sound mat for the price!
Style: 50 mil 50 SqFt, Style: 50 mil 50 SqFt
This is a good product. Many people go with KILMAT because of the value to price point. I did as well. When you clean the surface (in my case it was all painted metal) this stuff sticks very well. I do recommend you use a seam roller of some type, I used Lumiteco 3 piece roller set. This will help with adhesion and mostly flatten the overlapped edges. It also helps you see where you have rolled as it leaves little grooves. The difference when we had no sound mats and after was very impressive. We haven't finished our install yet and it is quieter than when we had an interior in the van. There are thicker mats available in other brands, but this will work great for our van build, but this helps keep the weight down. It is quality material, just be careful when you are removing the backing, the edge of the foil face can cut you. I suggest you layout where you are installing the mat and cut to fit. From what I have read, you don't need to cover every inch in the vehicle, just spot install for a big difference. I chose to cover most surfaces to help keep sound out when we are sleeping in the van. We haven't finished putting the van yet, but we have driven it around and been very satisfied with this product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 3, 2025

recommand products

Shaik - 22 - Peony, Rose, Amber
21.99
madonna die treille pascal adolphe jean dagnan bouveret
24.90
NEU NOS Zylinderkopfdichtung Original Opel Corsa A 1,5 D 15D 15TD Diesel 1,45mm
37.90
NEU NOS Wasserpumpe Original Opel Corsa A B Tigra A Kadett E Diesel 1,5D
74.00
ophelie pascal adolphe jean dagnan bouveret
24.90