SKU: 84610777782

Nissan Qashqai J11 Airbag-Steuergerät Reparatur

$71.10 $79.00
Save 10%
No.2 Bestseller on martinetexier.com >

Pay in installments of $19.75 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 13 - Aug 18

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Nissan Qashqai J11 Airbag-Steuergerät ReparaturWas ist ein Nissan Qashqai J11 Airbag Steuergert? Das Nissan Qashqai J11 Airbag Steuergert ist die zentrale Sicherheitseinheit, die bei einem Unfall alle Insassen Rckhaltesysteme aktiviert. Es berwacht permanent die Signale von Crashsensoren, speichert relevante Crash Daten und gewhrleistet die przise Auslsung der Airbags sowie Gurtstraffer fr maximalen Insassenschutz. Dieses Modul, auch als Airbag Control Unit (ACU) oder Airbag ECU bekannt, ist exakt

Was ist ein Nissan Qashqai J11 Airbag-Steuergerät?

Das Nissan Qashqai J11 Airbag-Steuergerät ist die zentrale Sicherheitseinheit, die bei einem Unfall alle Insassen-Rückhaltesysteme aktiviert. Es überwacht permanent die Signale von Crashsensoren, speichert relevante Crash-Daten und gewährleistet die präzise Auslösung der Airbags sowie Gurtstraffer für maximalen Insassenschutz.

Dieses Modul, auch als Airbag-Control-Unit (ACU) oder Airbag-ECU bekannt, ist exakt für den Nissan Qashqai der zweiten Generation (J11, ab Baujahr 2013) maßgeschneidert.

Es bildet das Herzstück der passiven Sicherheitssysteme und ist dafür zuständig, die Sicherheitseinrichtungen des Fahrzeugs hinsichtlich der Insassenschutzsysteme zuverlässig zu steuern und zu überwachen.

Warum ist das Nissan Qashqai J11 Airbag-Steuergerät defekt?

Das Nissan Qashqai J11 Airbag-Steuergerät kann defekt sein, weil interne Komponenten nach einem Unfall oder durch Alterungsprozesse versagen, was zu einer Speicherung von Crashdaten führt. Auch Kommunikationsfehler im Fahrzeugnetzwerk oder Probleme nach einem Batteriewechsel können einen Ausfall verursachen, wodurch das System seine Sicherheitsfunktion verliert.

Ein häufiger Grund für ein kaputtes Airbag-Steuergerät ist ein ausgelöster Unfall, bei dem Crashdaten unwiderruflich im internen Speichermodul hinterlegt werden.

Diese Daten blockieren die Wiederinbetriebnahme des Systems, bis eine professionelle Nissan Qashqai J11 Airbag-Steuergerät Reparatur erfolgt ist.

Weitere Ursachen können elektronische Defekte wie Kurzschlüsse oder Überspannungsschäden sein, die die Funktionalität des Steuergeräts beeinträchtigen und eine Diagnose erfordern.

Häufige Fehlercodes bei der Nissan Qashqai J11 Airbag-Steuergerät Reparatur

Bei der Nissan Qashqai J11 Airbag-Steuergerät Reparatur treten spezifische Fehlercodes auf, die direkt auf Funktionsstörungen oder Kommunikationsprobleme des Steuergerätes hindeuten. Diese Codes sind entscheidend für eine präzise Diagnose, da sie auf das Airbag-Steuergerät selbst beschränkt sind und nicht auf Sensoren oder andere Module.

  • B1015 → Airbag-Steuergerät Funktionsstörung → Interner Fehler oder Ausfall der Steuerungseinheit.
  • B1139 → Airbag-Steuergerät Funktionsstörung → Unerwartete Reaktion oder Fehlfunktion der Steuerungslogik.
  • B1129 → Fehler Airbagsystem → Allgemeine Störung des Airbagsystems, die direkt vom Steuergerät gemeldet wird.
  • B1155 → Fehler nach Fremdstart/Batteriewechsel → Systemfehler, oft ausgelöst durch Spannungsschwankungen oder Reset-Bedarf.
  • B1000 → Steuergerät Kommunikationsfehler → Unterbrechung oder Störung in der Datenübertragung zwischen dem Airbag-Steuergerät und anderen Modulen.

Diese Fehlercodes sind entscheidend, um zielgerichtet eine Diagnose am Nissan Qashqai J11 Airbag-Steuergerät durchzuführen.

Sie erfordern für ihre genaue Interpretation und Behebung den Einsatz einer professionellen Diagnosesoftware und eine Fachwerkstatt.

Welche Teilenummern bei der Nissan Qashqai J11 Airbag-Steuergerät Reparatur gibt es?

Für die Nissan Qashqai J11 Airbag-Steuergerät Reparatur sind mehrere 100% verifizierte OEM-Teilenummern von Nissan relevant, die die Kompatibilität mit dem Fahrzeugmodell J11 ab 2013 sicherstellen. Diese Nummern identifizieren das Originalteil und sind für eine erfolgreiche Instandsetzung unerlässlich, um das passende Ersatzteil zu finden.

  • 98820BK00A
  • 98820BK10A
  • 988204EH0C (Alternativ: K88204EH0D)
  • 685104EH4A
  • 685204EH0A
  • 68520HV00A

Es handelt sich hierbei ausschließlich um Originalteile von Nissan, die über diverse professionelle Ersatzteildatenbanken und Händler bestätigt wurden.

Vor dem Kauf und der Durchführung einer Nissan Qashqai J11 Airbag-Steuergerät Reparatur wird jedoch immer empfohlen, die Teilenummer nochmals am Fahrzeug zu überprüfen, um 100%ige Kompatibilität sicherzustellen.

Kompatible Modelle für das Nissan Qashqai J11 Airbag-Steuergerät

Das Nissan Qashqai J11 Airbag-Steuergerät ist speziell für den Nissan Qashqai der zweiten Generation (Typ J11, J11_) konzipiert, welche ab dem Baujahr 2013 produziert wurden. Es ist mit verschiedenen Motorvarianten wie dem 1.5 dCi und 1.6 dCi kompatibel, was eine breite Anwendung im Modellbereich gewährleistet.

Das Steuergerät ist exakt auf die elektronischen und mechanischen Anforderungen des Qashqai J11 abgestimmt.

Es gewährleistet die korrekte Funktion aller Airbag-Sensoren und die präzise Auslösung der Airbags im Falle einer Kollision oder eines Ausfalls.

Die Kompatibilität erstreckt sich auf Modelle bis mindestens 2017, wobei auch spätere Baujahre je nach spezifischer Ausstattungsvariante unterstützt werden.

Funktionsweise und Sicherheitsfeatures des Nissan Qashqai J11 Airbag-Steuergeräts

Das Nissan Qashqai J11 Airbag-Steuergerät steuert zentral alle Airbag-Systeme, indem es Signale von Crashsensoren überwacht und im Notfall die Auslösung von Fahrer-, Beifahrer-, Seiten- und Kopfairbags sowie Gurtstraffern veranlasst. Es speichert zudem Crashdaten für Diagnosen und aktiviert die Warnleuchte bei Fehlfunktionen.

Nach einem Unfall werden im internen Speichermodul detaillierte Ereignisdaten gesichert.

Diese Crashdaten sind essenziell für die Fehlerdiagnose und müssen nach einer Reparatur durch Fachpersonal gelöscht werden, damit das System seine volle Funktionalität wiedererlangt.

Das Steuergerät kommuniziert über CAN-Bus und andere interne Netzwerke mit weiteren Fahrzeugsystemen, wie ABS und ESP, und zeigt bei Problemen die Airbag-Warnleuchte an.

Einbauposition und wichtige Hinweise zur Nissan Qashqai J11 Airbag-Steuergerät Reparatur

Für die Nissan Qashqai J11 Airbag-Steuergerät Reparatur ist es wichtig zu wissen, dass das Modul typischerweise im unteren Bereich der Mittelkonsole oder unter dem Armaturenbrett positioniert ist, um es vor äußeren Einflüssen zu schützen. Der Ein- und Ausbau erfordert Fachkenntnisse und das Abklemmen der Batterie, um unerwünschte Auslösungen oder Systemfehler zu vermeiden.

Das Airbag-Steuergerät verfügt über mehrpolige Steckverbinder, die meist gelb gekennzeichnet sind und Kabelbäume zu den Airbags, Sensoren und Gurtstraffern führen.

Diese speziellen Stecker sind so konstruiert, dass sie Fehlverbindungen ausschließen und eine sichere Signalübertragung gewährleisten, auch um Ausfälle zu verhindern.

Aufgrund der hohen Sicherheitsrelevanz sollte die Instandsetzung oder der Austausch des Steuergerätes ausschließlich von qualifizierten Fachleuten in einer spezialisierten Werkstatt vorgenommen werden, um die korrekte Funktion sicherzustellen und die Nissan Qashqai J11 Airbag-Steuergerät Reparatur erfolgreich abzuschließen.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 84610777782

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 26 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
Verified Purchase
ralversity
Waukegan, US
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
T
Verified Purchase
Talagand
Carnegie, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
A
Amazon Customer
Belleville, US
★★★★★ 5
Versatile Room Divider With Easy Assembly and Strong Coverage
Size: 3 Panel 12FT W
I picked up this Siebwin 3-panel folding room divider mainly for privacy and room separation, and overall it works very well. Assembly is very straightforward, and the divider can be set up, taken apart, and stored without much effort. The fabric quality feels good, and the frame construction is stronger and more stable than expected. The support tubes especially feel well built and help keep the divider standing securely. One feature I really liked is the flexibility of the design. The panels can be used together as a complete divider or separated depending on the setup and available space. That makes it much more versatile for different room layouts or temporary privacy needs. The coverage is also very good, and the size matches the manufacturer’s description accurately. The fabric blocks light and background visibility well enough to provide solid privacy without feeling overly heavy. The wider feet also help improve stability compared to thinner folding dividers. Another positive detail is that everything arrived complete with no missing parts or damaged pieces, which made assembly much easier and faster. Compared to cheaper privacy screens, this one feels more durable and easier to customize depending on the situation. In terms of value for the money, it feels like a very practical and worthwhile purchase considering the size, flexibility, and build quality. Overall, a versatile and well-built room divider with easy assembly, strong privacy coverage, stable construction, complete included parts, flexible panel configuration, and excellent everyday functionality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
F
Fred
Massapequa, US
★★★★★ 5
Stable, flexible in deployment configuration, creates true privacy and looks great.
Size: 3 Panel 12FT W
This is the second room divider panel I have installed, and there are several features about this one that I like much better than my older one. The fact that there are no gaps and that the material is thicker means you get more privacy or more hiding power, if you wish. My older divider has vertical spaces between each of the panels and the panels are half as wide as the Siebwin panels, so there are many vertical spaces. The Siebwin divider really creates privacy. Another feature that I really appreciate is that the legs are wider and stand off from the floor. On my older one the legs are flat and they're rather awkward to adjust because they create more drag on the floor. The feet on the older one also loosen if you turn them counter clockwise, so adjustments of configuration that require the feet to be moved are more complex. The older divider also must be deployed in a zig-zag fashion because he feet are not as wide, but this new one can be deployed and stable in a straight, an "N" shape or an arc. They are both the same length, but because the older one must be use in a zig-zag deployment it doesn't reach to the length of the new one. The Siebwin divider definitely costs more at $103.48, but it sports several features and advantages over the other brand, so it does a better job and is worth the extra cost.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
C
Computer
Chelsea, US
★★★★★ 4
Easy to assemble, does the job, material is shiny nylon and shows creases, minor defects, sloppy
Size: 3 Panel 12FT W, Size: 3 Panel 12FT W
The Siebwin room divider is a good idea, and for the price, it mostly delivers on the intended functionality. I ordered the 12 foot, 3-panel version mainly to hide an unfinished basement storage area that had become an eyesore. It works well for that purpose and gives the space a cleaner appearance without spending the kind of money that more decorative dividers or custom partitions cost. If you need something temporary, portable, or mainly functional, this is a viable option. There are a few limitations that became obvious during setup and use. The first thing I noticed was that the weld quality on some of the metal poles is fairly sloppy. Once the cover is installed, you do not really see it, but up close, it does not look especially refined or professional. The blackout material also is not a matte canvas style fabric as I expected. It has more of a shiny nylon appearance, and the creases are fairly visible. Being that it’s more of a nylon, I’d be hesitant to try steaming it to remove the creases. However, the creases do not matter if you are using it in a basement, dorm, or shared room, but for photography, video work, or a professional office setting, the appearance could be disappointing. The fabric is thick enough, though. It blocks visibility well enough, but strong light behind it still shows through to some extent, nothing deal-breaking. Also, my fabric appeared to be slightly defective. The hook and loop strip on one of the bottom sections was off-center and couldn't be totally attached because it was lined up with one of the legs. I originally hoped to use this as a video backdrop, but I will probably end up replacing the fabric with a proper green screen or canvas material while continuing to use the frame itself. For now, it does a good job of covering my basement junk. Assembly was actually easier than I expected and took roughly 15 to 20 minutes. The longer vertical poles are tethered together similarly to tent poles, which made setup straightforward and fairly intuitive. The shorter horizontal pieces slide and snap together to the top and bottom of the vertical assembly. After each section is assembled, the divider panels connect together with metal plates and two knurled screws (at the top and bottom), so no tools are really required. A few screws were difficult to start because paint had gotten into the threads, but once they caught, they tightened down normally. The feet install with similar knurled fasteners and help keep the divider reasonably stable. One thing to watch for during setup is the fabric orientation. There is one arrow indicator in the middle of the fabric to indicate up. However, if you need another indicator, the smaller hook and loop strip goes on the bottom while the longer strip goes on top. I realized mine was upside down right before finishing and had to redo it. I wasn't difficult to redo, despite the defect in mine. The overall design is practical and easy to move around. I do like that the panels can fold and bend into different shapes depending on the space. The widened feet help stability, although when trying to stretch the fabric tight, I noticed the poles sometimes wanted to overlap slightly at the joints. Tightening everything helped somewhat, but it still happened occasionally. The divider feels adequate for normal indoor use, though I would not expect premium durability or luxury-level fit and finish at this price point. The entire device can also be easily disabled and stored in a tote if you need it completely out of the way. It comes with assembly instructions, but even if you didn’t have them, it’s easy to build without them (save a mistake or two). In terms of value, I think the Siebwin divider mostly matches its price. Around $100 gets you a large freestanding partition with decent usability and easy assembly, but there are compromises in materials, appearance, and refinement. The defects are also off-putting, but hopefully you won't have them. Higher-end room dividers can easily cost two or three times more, so some of the tradeoffs are expected. I also noticed cheaper alternatives online, but based on the quality here, I suspect those would probably have even more issues. For practical home use, temporary privacy, hiding storage areas, or separating shared spaces, this is a good option as long as expectations stay realistic.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026

recommand products

CinCin - Flacher Satin Haarreif in Blue Perennial
29.90
MET SHIRT | Four Leaf Clover Green
139.30
NO 05 SHIRT | Black Washed Denim
199.00
Rubacuori - Vergoldete Statement Herz Ohrclips
69.90
NO 02 JEANS | Washed Light Blue
189.00