SFAR-S-16DI-M

SFAR-S-16DI-MAbout the product SFAR S 16DI M has 16x DI (Digital Inputs). Digital Inputs can work as fast pulse counter up to 1 kHz with save to FRAM memory, support PNP or NPN input types. Every single input is isolated from power supply and RS485 with use of opto isolators. Built in RS485 interface allows to easy connection over Modbus RTU ASCII protocol with a PLC makes the modules an external I O. The use of 32 bit ARM core processor provides fast processing

About the product

SFAR-S-16DI-M has 16x DI (Digital Inputs). Digital Inputs can work as fast pulse counter up to 1 kHz with save to FRAM memory, support PNP or NPN input types. Every single input is isolated from power supply and RS485 with use of opto-isolators. Built-in RS485 interface allows to easy connection over Modbus RTU/ASCII protocol with a PLC makes the modules an external I/O. The use of 32-bit ARM core processor provides fast processing and communication with the baud rate from 2400 to 115200 bps. The module is equipped with a set of LEDs used to indicate the status of inputs, power supply and RS485 communication. This feature is useful for diagnostic purposes and helping to find errors. Built-in mini USB allows for initial configuration of the unit without power supply. To simplify installation the modules have been equipped with Quick Connector system. Using dedicated SFAR-S- LINK cable allows to connect up to 15 modules which provide both RS485 communication and power supply.

Key Features
• 16x opto-isolated Digital Input
• Every DI works as 32-bit impulse counter or time counter
• Support for 2 encoders
• Non-volatile FRAM memory for counters
• Built-in LEDs for device status indication
• Modbus RTU/ASCII communication
• Baud rate: 2400 bps to 115200 bps
• Up to 128 modules on the bus
• Dedicated TCP/IP to Modbus RTU/ASCII
gateway device SFAR-S-ETH
• Built-in mini USB type B port for configuration
• Fast and easy connection with SFAR-S-LINK
• Space-saving housing, DIN rail mount

Specification
Digital Inputs (DI)
• Input type: PNP or NPN
• Fast pulse counter up to 1 kHz save to FRAM memory
• Time counting in ms for active input
• DI1-DI4- 2x encoder support
Platform
• ARM Cortex-M3 Communication
• Interface RS485 half-duplex
• Up to 128 devices on the bus
• Protocol: Modbus RTU/ASCII
• Baud rate: 2400 to 115200 bps
• Interface mini USB type B
Power supply
• 12-24 V DC ± 20%
Housing
• Dimension WxHxD: 22.7x110.9x119.1 mm
• Construction: UL approved, self-extinguishing plastic (PC/ABS)
• DIN rail mounting DIN (DIN EN 50022 norm)
• Cooling: internal air circulation
Environment
• Operating temperature: -10°C to 50°C
• Storage temperature: -40°C to 85°C
• Relative humidity: 5% to 95%, no condensation
• Ingress Protection Rating: IP40 – for indoor installation

 Do you have question about this product?

For any help please contact our support here