Barrettine Creocote Wood Treatment 4L

Barrettine Creocote Wood Treatment 4LSimilar physical water repellency application characteristics of traditional Creosote but contains no biocide preserver. A bitumen wax based treatment that helps to protect exterior rougher cut timber by repelling water and preventing ingress. Water repellent Oil based Suitable for rough, sawn or smooth timber Protects against water damage and water ingress Traditional appearance when dry Helps prevent swelling, twisting & cracking of wood. Good

Similar physical/water repellency/application characteristics of traditional Creosote but contains no biocide/preserver. A bitumen/wax based treatment that helps to protect exterior rougher cut timber by repelling water and preventing ingress.

• Water repellent - Oil based
• Suitable for rough, sawn or smooth timber
• Protects against water damage and water ingress
• Traditional appearance when dry
• Helps prevent swelling, twisting & cracking of wood.
• Good Penetration into the wood
• Contains no biocide preserver.
• Economical to use.
• Traditionally used for sheds and fences.
• Exterior use only

Application

• Ensure wood to be treated is dry, free from dirt and repellent coatings such as paint or varnish (remove and sand down as required).
• Apply product via brush or spray in suitable conditions. (Make sure weather conditions are dry and still). 
• Coverage 1 litre to 6-8 sq metres per coat. Apply 2 coats for best results to bare or stained wood, not painted.
• If several containers are to be used mix/match before use as colours can vary from batch to batch.
• Drying times 24-48 hours.
• Clean equipment with White Spirit.