Spinnaker Pole Fitting, Size Small, for pole section ø48 mm

Spinnaker Pole Fitting, Size Small, for pole section ø48 mmComposite spinnaker pole fitting The end fitting is made of glass fibre reinforced polyamide composite. This material makes for a combination of low weight and strength and it also prevents damage to boat or mast when the pole is on the fore deck. The claw has a well rounded stainless chafe guard, preventing damage to sheet and guy. The stainless, spring loaded plunger is operated at the end fitting or with a release line. Attachment holes for

Composite spinnaker pole fitting

The end fitting is made of glass fibre reinforced polyamide composite. This material makes for a combination of low weight and strength and it also prevents damage to boat or mast when the pole is on the fore deck. The claw has a well rounded stainless chafe guard, preventing damage to sheet and guy.

The stainless, spring loaded plunger is operated at the end fitting or with a release line. Attachment holes for spinnaker pole lift and downhaul or bridles. 

The inner part of this fitting has a diameter of ø39 mm and is used for Seldén ø48 and ø60 mm alu poles and ø47, ø59 and ø61 mm carbon poles.

3 Monel pop-rivets (ø4,8x12,7 mm) and a 0,5 mm thick spacer shim are included in the kit. The pop-rivets are only to be used for installation in an aluminium section - not in carbon fiber.

Connect only to Seldén's ø30 mm Spinnaker pole eyes 534-531-01 or 534-528-01.

See Yacht catalogue, version 8, page 147.

Section: S072