DB TECHNOLOGIES VIO X315

DB TECHNOLOGIES VIO X315VIO X315 Introducing VIO X300 series, the evolution of our premium line VIO X: powerful, tour grade, three way tri amped point source speakers for public address in large venues. VIO X315 is a self powered point source speakers capable of delivering outstanding sound pressure levels for the size, thanks to premium components, a three way tri amplified design and state of the art electronics. The 3 way tri amped design. The MF HF coaxial component

VIO X315

Introducing VIO X300 series, the evolution of our premium line VIO X: powerful, tour-grade, three-way tri-amped point source speakers for public address in large venues. VIO X315 is a self-powered point source speakers capable of delivering outstanding sound pressure levels for the size, thanks to premium components, a three-way tri-amplified design and state of the art electronics.

The 3-way tri-amped design.

The MF-HF coaxial component mounted in both VIO X310 and VIO X315 utilise the same transducer used in the widely successful VIO L1610 line array module: it's a 4” voice coil plus 2.5” voice coil coaxial driver, an incredible heavy-duty and high-fidelity transducer reproducing from 500Hz up.

When it comes down to detailed mid-range reproduction, a compression driver diaphragm is much quicker and more accurate than a similar sized woofer. Furthermore, because of the compact dimensions, this content can be easily dispersed through a horn, just like you would do with an HF driver, for improved control over the sonic pattern.

These characteristics result in an incredibly faithful and meticulous reproduction of the most critical frequency range, essential for clear-cut intelligible vocals and instrument separation in your mix.

Since a great portion of the frequency content is horn loaded, not only is the sound pressure level impressive due to the acoustic loading, but also directivity control is maximised.

Last but not least, the sum of all these clever acoustic design choices combined with cutting edge class-D amplifiers and DSP processing result in remarkable sound pressure levels, as high as 137dB.

VIO X315 is equipped with a single high performance 15" neodymium woofer, capable of providing loud, precise, wide band performances, with no compromises.

The goal was to develop a real full-range PA system, with an astounding wide frequency response, reaching as low as 37Hz.

In this model, the mid-hi coaxial transducer is placed behind a 90°x50° horn which has been designed with a slight tilt downwards (around 5°) to optimise the coverage in average venues.

Electronics and processing.

Modern Tour requirements include a very reliable design and extended use of technology to adapt the PA to any venue anywhere in the world: VIO X300 series takes advantages of the entire range of available upgrades derived from the VIO series development in the last years.

The series is equipped with a 1400W RMS Class-D Digipro G4 power amplifier, a 4-channel amplifier able to drive each component individually, with dedicated FIR filters enabled sound processing for low, mid and high frequencies.

This amp has been specially designed for VIO X300 series and allows for complete networkability via Aurora Net thanks to RDNet ports. A modular card slot is ready for future I/O and remote-control upgrades.

A Power Factor Corrections enabled PSU ensures extreme adaptability to any environment while an integrated System Test checks for any possible transducer failure during the show. Also, a frontal LED light will always allow to determine the position of any remote controlled VIO X3 enclosure at any time via Aurora Net Software, the same suite used to access the speakers’ advanced processing instances, such as delay up to 560ms and up to 16 EQ filters.

VIO X300 makes the most of the acoustic design, delivering an astounding SPL and allowing for full bandwidth capabilities.

All of the above great advantages come with the ease of use of any other conventional active point source speaker.

Thanks to specific brackets and M10 threads, VIO X300 series can be utilised as fills in larger setups, such as a full range under balcony or delay system in fixed installations. Equally VIO X300 can be deployed as a compact, complete standalone 3-way system for any audience.

Lastly, VIO X300 can cover large, open air sound reinforcement setups, serving as high SPL fills, or powerful standalone PAs for the most demanding applications.

Features

• 3 Way Tri-amp Active Point Source
• Coaxial Mid-High Transducer
• 1400 W RMS Digipro G4 Amp Technology
• 137 dB SPL
• Extended Low-end Response
• Flyable with accessories
• Neodymium Components
• Linear Phase FIR Filters
• Full-range SMPS with PFC
• Modular Slot for Network and Digital Audio Expansion Cards (RDNet card installed)
• System Test for Quick Transducers Diagnostics

Specifications

Technical data

• Speaker Type: 3 Way Active Loudspeaker

Acoustical data

• Usable bandwidth [-10dB]: 34 - 19.200 Hz
• Frequency Response [-6dB]: 37 - 18.000 Hz
• Max SPL: 137 dB
• HF: 1x 1.4”, 4"- 2.5" v.c. Coaxial Neo
• LF: 1x 15”, 4" v.c Neo
• Directivity: 90° x 50° - 5° tilted down [H x V]

Amplifier

• Amplifier: 1400 W RMS Class-D Digipro® G4
• Cooling: Convection
• Power Supply: Full range SMPS with PFC
• Processor
• Controller: DSP 32 bit
• AD/DA Converter: 24 bit/96 kHz
• Limiter: Peak, RMS, Thermal
• Processing: FIR Linear Phase Filters

Input

• Signal Input: 1 x XLR balanced, 1 x RJ45 Link (RDNet), 1x USB (Data Service)
• Signal Output: 1x XLR balanced, 1 x RJ45 Link (RDNet)
• Power Socket:
  1x PowerCON TRUE1 In
  1x PowerCON TRUE1 Out
• Controls:
  1x input Rotary Encoder (8x presets)
  1x Ready LED
  1x Mute/Prot LED
  1x Signal LED
  1x Limiter LED
  1x Frontal LED
  1x Button and 1x LED System Test

Mechanics

• Housing: Wooden Cabinet
• Handles: 3 (1x side, 1 on top)
• Rigging points: 12x M10 Thread
• Pole mount: D36mm
• Width: 420 mm (16.5 in)
• Height: 820 mm (32.3 in)
• Depth: 520 mm (20.5 in)
• Weight: 39.5 kg (87.1 lbs)