Ecoone Hose Filter (Garden Hose Pre-Filter)

Ecoone Hose Filter (Garden Hose Pre-Filter)EcoOne Hose Pre Filter Removes Contaminants and Heavy Metals From Tap Water Including Chlorine, VOCs, and Lead Filters 40,000 Gallons. Features: Dual chamber design, flow rate 2 GPM. Combination of granular activate carbon (GAC) and a proprietary reduction oxidation media that is classified by the EPA as a bacteriostatic. Temperature range 35F 100F Working pressure range: 20 100 ps 40,000 gallon capacity ecoone Hose Filter Instructions: 1. Flush

EcoOne Hose Pre-Filter - Removes Contaminants and Heavy Metals From Tap Water Including Chlorine, VOCs, and Lead - Filters 40,000 Gallons.

Features:

• Dual chamber design, flow rate 2 GPM. Combination of granular activate carbon (GAC) and a proprietary reduction/oxidation media that is classified by the EPA as a bacteriostatic.
  
• Temperature range 35F –100F
  
• Working pressure range: 20-100 ps
  
• 40,000 gallon capacity

ecoone Hose Filter Instructions:
1. Flush garden hose before use to remove sediment and contaminants. Remove filter end caps and save them to store filter.
2. Attach filter to garden hose and flush for one minute or until water runs clear. Can be used at either end of a garden hose. Can be used with sprayer attachment or garden sprinkler with very little reduction in water flow.
3. When done, place end caps back on filter. If end caps are lost, store in a plastic storage bag in refrigerator as Hose Filter must be kept moist. If Hose Filter is allowed to dry, the media will harden and become ineffective.
Works best with a flow rate of 2 GPM or less. For highly chlorinated water, reduce flow rate to 1 GPM. If flow rate slows, back flush filter to remove sediment build up. If it’s not possible to back flush filter, place female end in a bucket of clean water and shake to loosen sediment blockage.
Your Hose Filter can last up to 40,000 gallons, depending on use and initial water contamination. Works with city or well water; hard or soft water. Note: If water contains severe amounts of sediments, connect 2 hose filters together for optimal results.

SAVE END CAPS FOR STORAGE! Filter should be stored wet, otherwise it will dry out. Simply place the end caps back on the Hose Filter after use and store in a cool, dark place. If the end caps are lost or if there will be long periods of time between uses, place Hose Filter in a plastic bag and store in refrigerator.