ImmersionRC SpiroNET LZR Long Range Array Mounting Kit

ImmersionRC SpiroNET LZR Long Range Array Mounting KitThe LZR Long Range Array Mounting Kit allows the mounting of two LZR 5. 8GHz patch antennas for the ultimate long range 5. 8G flying. Using the custom cables and mounting kit, hook up your antennas to your rapidFIRE receiver and fly further and with more confidence than ever before on 5. 8. The twin antenna array, when coupled with a rapidFIRE receiver, provides all of the rapidFIRE multi pathing elimination benefits at extreme range. A milled carbon

The LZR Long Range Array Mounting Kit allows the mounting of two LZR 5.8GHz patch antennas for the ultimate long-range 5.8G flying. Using the custom cables and mounting kit, hook up your antennas to your rapidFIRE receiver and fly further and with more confidence than ever before on 5.8.

The twin-antenna array, when coupled with a rapidFIRE receiver, provides all of the rapidFIRE multi-pathing elimination benefits at extreme range.

A milled carbon-fiber plate is mounted under the Dominator fan-plate cover. Two tool-free thumbscrews attach the formed aluminum mount to the goggles.
Four M3 screws mount the twin LZR 13dBi antennas to the aluminum mount and hook up the two supplied semi-rigid high-frequency cables.

Does NOT includes LZR Antennas or goggles shown in some pictures.

Features

When using the array with two LZR antennas

• 5.8GHz Band, Twin 13dBi gain
• ~70 degree -3dB Horiz Beam Width, 35 Vert
• F/B Ratio > 35dB, VSWR < 1:1.35 @ Center Freq.
• Right Hand Circular Polarization
• Carbon Fiber FatShark Dominator Goggle Mount
• Thumb Screw Quick Release
• Two included 8GHz RG402 cables
• 10km+ (easy) on 5.8GHz

Don’t Cross The Beams!

No ghosts to catch here, overlapping beams ensure that a quad at long range is easy to track, without a complex antenna tracker. rapidFIRE’s twin RSSI display makes it trivial to locate a distant quad/plane. When the RSSI bars are equal, the antenna array is aligned exactly with the model. Much easier than trying to peak the RSSI measurement with a single antenna solution. The wide 70 degree horizontal beam-width ensures that even when the array is not perfectly aligned with the model, reception is guaranteed.

rapidFIRE Integration

The twin RSSI bars (especially the full-width version) may be used to aim the antenna.
An upcoming firmware update (v1.3.0) will augment this with unique audible feedback, allowing a long-range pilot to keep eyes on the target, and not the OSD.

Compatible with all 13dBi SpiroNETs

Back in 2013 when we released the first version of the 13dBi SpiroNET Patch antennas, we included mounting points for future bracket designs. These are the same on the latest version of the patch. If you own these older versions of the patch (LHCP, or RHCP versions), they are completely compatible with the new mounting brackets.

Includes

• 2x High quality (8GHz) Coaxial cables
• 1x Milled carbon fiber Dominator fan mount
• 2x Thumb Screws
• 4x Fan mount screws (extended)
• 4x Antenna screws
• 1x Stamped Aluminium antenna mount