SKU: 82159658828

DS80804HW | Stahlin 8.74x8.74x4.06" Diamond Shield Series Fiberglass Enclosure – NEMA 4X – Opaque Hinged, 2 Cover Screws (HW)

$95.94 $106.60
Save 10%
No.2 Bestseller on martinetexier.com >

Pay in installments of $26.65 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 15 - Jul 20

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

DS80804HW | Stahlin 8.74x8.74x4.06" Diamond Shield Series Fiberglass Enclosure – NEMA 4X – Opaque Hinged, 2 Cover Screws (HW)Need a quote or custom modification? Contact ACI Automation. Request a Quote Product Overview DiamondShield Series fiberglass enclosures combine premium aesthetics with NEMA 4X performance. Internal panel management, SpeedPanel dead front and swing panel capability, and operator interface mounting make it the premier choice for high end machine control, OEM equipment, and demanding industrial installations. The DS80804HW is a Diamond Shield Series

Need a quote or custom modification? Contact ACI Automation. Request a Quote →

Product Overview

DiamondShield® Series fiberglass enclosures combine premium aesthetics with NEMA 4X performance. Internal panel management, SpeedPanel™ dead-front and swing-panel capability, and operator-interface mounting make it the premier choice for high-end machine control, OEM equipment, and demanding industrial installations.

The DS80804HW is a Diamond Shield Series Fiberglass enclosure with a Opaque Hinged, 2 Cover Screws (HW) configuration, rated NEMA 1, 3R, 4, 4X, 6P, 12 / IP66, cULus Listed File #E64358, and CSA Certified. Manufactured in the USA using Stahlin's SolarGuard® proprietary formulation for superior chemical resistance, UV durability, and flame retardancy.

A proven non-metallic alternative to NEMA 4X enclosures from Allied Moulded, Hoffman, Hammond, Saginaw, Wiegmann, Hubbell, Fibox, Integra, and AttaBox.

Key Features

  • NEMA 1, 3R, 4, 4X, 6P, 12 rated — IP66 per IEC 60529
  • cULus Listed (File #E64358) — UL 50, UL 50e, UL 508A
  • CSA Certified C22.2
  • SolarGuard® non-halogenated Fiberglass — UL 94-5VA flammability rating
  • Continuous poured-in-place polyurethane seamless gasket
  • 304 stainless steel hinge and hardware throughout
  • Molded-in brass inserts for superior pull-out strength
  • Temperature range: -76°F to +274°F
  • Back panels: aluminum, carbon steel, SS, fiberglass, or ABS
  • ModRight® custom modification program compatible
  • Made in USA

Specifications

Catalog Number DS80804HW
Series Diamond Shield Series
Material Fiberglass
Interior Dimensions 8.74 x 8.74 x 4.06 in (interior)
Cover Type Opaque Hinged, 2 Cover Screws (HW)
Color RAL 7035 Light Gray
NEMA Types 1, 3R, 4, 4X, 6P, 12
IEC Rating IP66
UL Standards UL 50, UL 50e, UL 508A
cULus Listed File E64358
CSA Standard C22.2
Temperature Range -76°F to +274°F
Flammability UL 94-5VA
Flame Spread NFPA 101 Class A
UV Outdoor Rating UL 746C (f1) Rated
Gasket Poured-In-Place Polyurethane, Seamless
Country of Origin USA
Availability Usually Stocked — ships within 5 days
List Price $213.20

Applications

✓ Machine control panels
✓ Wastewater treatment
✓ Oil & gas instrumentation
✓ Solar & renewable energy
✓ Marine & offshore
✓ Food & beverage processing
✓ Car wash and wet environments
✓ Mining and heavy industrial
✓ HVAC and building automation
✓ Utility and power distribution
✓ OEM equipment manufacturing
✓ Chemical processing

Competitor Cross-Reference

The Stahlin DS80804HW replaces comparable NEMA 4X enclosures from Allied Moulded, Hoffman, Hammond, Saginaw, Wiegmann, Hubbell, Fibox, Integra, and AttaBox. Non-metallic construction eliminates rust, eliminates painting, reduces weight, and delivers superior chemical resistance — often at a lower total installed cost.

Manufacturer Comparable Series Stahlin Advantage
Hoffman (nVent) A-Series / N4X Steel Non-metallic: zero corrosion, no painting, lighter weight
Hammond Mfg 1414 / 1481 Steel N4X SolarGuard® fiberglass for superior outdoor UV resistance
Saginaw Control SCE Steel Series USA-made fiberglass vs. imported steel alternatives
Wiegmann (Hubbell) WC / N Series Steel Full 304 SS hardware; poured PU seamless gasket
Fibox CAB / MNX Polycarbonate SolarGuard® for high-temp and heavy UV applications
Integra Polycarbonate Series cULus + CSA dual-listed; broader back panel options
AttaBox Centurion Series Extended temp -76°F; integral flange — no assembly
Hubbell Wiring NEMA 4X Polyester UL 746C f1 outdoor rated + ModRight custom mod program
Allied Moulded Series 400 Fiberglass cULus + CSA dual-listed; SolarGuard® UV rating; Made in USA

CAD Drawing Downloads

Download certified CAD drawings for DS80804HW:

Frequently Asked Questions

What NEMA ratings does the DS80804HW carry?

The DS80804HW is rated NEMA 1, 3R, 4, 4X, 6P, 12, protecting against dust, oil, coolants, rain, sleet, hose-directed water, and submersion. Also rated IP66 per IEC 60529.

Is this enclosure cULus Listed?

Yes. The DS80804HW is cULus Listed under File #E64358 per UL 50, UL 50e, and UL 508A, and CSA Certified to C22.2.

What back panel options are available?

Back panels are available in aluminum (AL), painted carbon steel (CS), stainless steel (SS), fiberglass (FG), and ABS. Add the suffix to your order. Contact ACI Automation for sizing and compatibility guidance.

Can I modify or customize this enclosure?

Yes. Stahlin's ModRight® program supports custom cutouts, windows, printing, laser engraving, mold-in colors, DIN rail kits, EMI/RFI shielding, and custom mounting. Submit your request through ACI Automation.

How do I get pricing?

ACI Automation is an authorized Stahlin distributor. List price is shown above. Request a quote for distribution pricing and lead times.

What is the lead time?

Availability code B: Usually Stocked — ships within 5 days. Contact ACI Automation to confirm current stock.

What is the temperature rating?

The DS80804HW is rated -76°F to +274°F — suitable for cold storage, outdoor industrial, and elevated-temperature applications.

Ready to Order or Need a Custom Quote?

ACI Automation is your authorized Stahlin distributor. We serve OEM panel builders, system integrators, and MRO customers with fast quotes, application support, and ModRight custom solutions.

Request a Quote
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 82159658828

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 29 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Verified Purchase
C
Cuba, US
★★★★★ 5
Delightful little device now that I've had a practice run with it
Color: Silver
I just picked this up to make my own cappuccino and breve and I must say that I've fallen in love with the thing. My first use was a bit of a misfire owing to my inexperience with it, but the second time worked like a champ. The trick is to ensure that you have plenty of empty head space in the container to develop a good vortex and foam volume while still having a tall enough fluid column to keep the mixing head mostly submerged while generating the vortex. My first attempt involved using about half a cup of half and half in a small saucepan. I had more than enough head space, but I was only barely able to keep the mixing head (it comes with two: a single turn coil and a 3-turn coil of coil) submerged and that went poorly, leaving me with a bit of a mess to clean up on my rangetop as the lack of fluid column ended up slinging the fluid around and out of the saucepan. The second attempt went far better, as I transferred the barely-simmered half and half back into the Pyrex two-cup mixing cup in which i initially measured the 4 fl. oz. This time it worked beautifully. There was just enough unfoamed column height to keep the mixing head well covered prior to powering up and it just barely kept me sufficiently covered while powered up to maintain a very vigorous yet controlled vortex. This method also had the advantage of telling me exactly how much total foamed volume I had generated. The resulting breve had a wonderfully thick and frothy head in my mug and resulted in a delightfully topped beverage which, if anything, had a bit too much foam and a bit too little liquid. That's on me, however, since I wanted to get a feel for the device under better conditions to build my own experience; I'll just run the frother for less time next time. Cleanup of the device itself is quite easy: simply detach the mixing head and shaft from the motor base and rinse. I always hand-wash my dishes, so I'm not in a good position to speak to its machine wash compatibility, but I suspect that it would come out just fine, provided that care is taken not to bend the shaft or coil head out of shape. The device itself is small enough to fit in a purse and should travel quite nicely, though you'll need to commit to a single mixing head, which will almost certainly turn out to be the smaller one. It's really nice to be able to make cappuccino/breve at home any time I see fit now. It's going to make a well-loved addition to my kitchen.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 6, 2018
C
Verified Purchase
C. Day
Alexandria, US
★★★★★ 4
Worked well, fast, then overheated. Contacted Vomelon and they were quick to help me replace unit.
Color: Silver
Update ***Vomelon customer service is great! I contacted them about my issue, they responded quickly and worked to resolve it. They're giving me a new one! Hope this one works out. I'm adding back a star for their service. Update 4/18/20 While making whipped Dalgona coffee today the unit slowed down the completely shut off. I pressed the power button again to restart and same thing, it starts at high speed then slows down and shuts off. I will be contacting seller. I’m taking away a star, can’t believe this is happening. First day using this frother with the batteries provided and the body became very hot. Used it for about 3 minutes and the heat became uncomfortable in my hands. Took out the AAA alkaline batteries “Nai Li Wang” brand made in China and replaced them with some Kirkland AAA that I had on hand. Problem solved! No overheating with the new batteries. Throwing away the China made batteries. Would’ve been 5 stars if it weren’t for the overheating. Other than that mishap, the frother was easy to use and pretty powerful. Whipped up my coffee with maple syrup (making Dalgona coffee) really quick. I like that it has a cover for storage. I don’t have much space so having a compact size with a cover is convenient, I can put it in a drawer or storage box without damage to the whisk. Update: Day 2 of use Body of unit became warm but not hot as with original batteries provided. I used new batteries. Had the unit on for 4-5 minutes to whip my dalgona coffee. Not sure if the unit is supposed to get warm? Is it normal? I will contact seller. Besides that, my coffee got whipped pretty quick. I want to upload a photo but seems that Amazon has taken away that function for me? I could upload photos for my previous reviews on other products.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2020
G
Verified Purchase
Guy E. Wolek
Houston, US
★★★★★ 5
Great Little Frother.
Color: Silver, Color: Silver
I really like this this little frother. What I noticed first is that it comes with a cover for the frothing arm. That’s very practical if you travel with it. I have traveled with a frother before and I put it in a toothpaste box, not much protection there. I use this 2 to 4 times a day. I can come pretty close to creating a Starbucks flat white at home. That saves $$$. The next thing I really like is that I can remove the arm for cleaning. If the arm does not come off clean up is a bit tricky. How does it work? Great! It has one speed, Fast. The power button is on the base of the handle so I just had to adjust the way I hold the frother when I turn it on. One thing, make sure the froth head is all the way into the liquid when you start it, lol. This little machine whips up a thick froth fast. It comes with 2 frothing heads, a three spring version as well as a standard one spring. There is a lot of plastic, but it doesn’t look or feel cheap. Actually I think it helps keep the weight down. I travel some and I appreciate when things are light. Over all, this is really nice it’s light portable and works great. I highly recommend this product. I was given this product for review and I am so glad they choose to contact me. I have been frothing milk for my coffee for the last few years. This has now became my go to frother.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 12, 2019
J
Verified Purchase
JSS
Pawtucket, US
★★★★★ 5
Great Frother
Color: Silver
The best frother I’ve owned! Love that the whisk is removable for washing, the end is flat so it stands up on its own and it’s pretty powerful.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 20, 2026
T
Verified Purchase
Toga
Cuba, US
★★★★★ 1
Almost right but connector sucks
Color: Silver
I much prefer a frother with swappable batteries and always use rechargeable AAA's and never disposable one's. The power button is in a comfortable spot as opposed to everyone else's odd and very uncomfortable side placement. Placing the power button on the side make you have to twist your entire arm to have your thumb facing down to be able to press anything whereas this one is right on top and can hold it like a simple joystick with no twisting of my arm. However, these plastic attachment points crack waaay too easily. I've already bought 3 of these and this is the part that breaks on all of them. I have designed and printed new attachments but the installation of them can damage the motor if I'm not careful. The motor also looses torque after only a few months. The windings need to be improved. Even though I really hate the plastic attachment, the button on top and the ability for it to stand up on its own without some stupid fiddly stand are the ONLY reasons I come back to this design. The moment someone makes a fully metal attachment (like I've seen) a power button on top and self standing, I'll throw this one away. Updated April 2025: I am about to buy my 4th one since 2019. This is NOT an endorsement for it, I just haven't found anything design wise that's better. The motor in these are short lived and they give out with no warning. Ergonomically this design make more sense than a side mounted button or switch, but I'm still dropping a star for the fact I've had to buy 4 of these darn things in such a short time Update: Oct 2025 I just bought this replacement in April and this things motor is already dead. I'm done with this item/seller. Just an overly cheap product. Product no longer worthy of even 2 stars
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2024

recommand products

9 Pieces JST Y Connector 3 Pin JST Plug Splitters Servo Extension JST Male to Female RC Servo Extension Cord Wire Cable Compatib
12.95
HEALING NATION ROLL ON 1000MG
12.00
BOB MARLEY 1 1/4 PAPER CONE 6CT
40.99
Traxxas 8933 Bumper Mount, Front
12.95
Spektrum 14.8V 3200mAh 4S 50C Smart LiPo G2: IC3, SPMX324S50
88.80