EAW SB210 Passive Installation Subwoofer (Black) - 2x10"

EAW SB210 Passive Installation Subwoofer (Black) - 2x10"The EAW SB210 Black is a high performance, compact passive subwoofer that brings deep, powerful bass to spaces where size is limited but performance is paramount. Part of EAW's revered SB Series, the SB210 is engineered for installations where low frequency reinforcement is essential but floor space is at a premium. This subwoofer features a dual 10 inch cone driver configuration, each with a 2. 5 inch voice coil, designed to maximize cone area and

The EAW SB210 Black is a high-performance, compact passive subwoofer that brings deep, powerful bass to spaces where size is limited but performance is paramount. Part of EAW's revered SB Series, the SB210 is engineered for installations where low-frequency reinforcement is essential but floor space is at a premium. This subwoofer features a dual 10-inch cone driver configuration, each with a 2.5-inch voice coil, designed to maximize cone area and produce impressive output despite its smaller form factor. The unique driver mounting and ultra-low turbulence port design help optimize the front area, resulting in superior acoustical performance that makes no sacrifices in sound quality, even in space-constrained applications.

The SB210 Black offers a remarkable combination of power and compactness, capable of producing a maximum SPL of 128 dB (whole space) and 134 dB (half space) with a 12 dB crest factor, ensuring that it can fill mid-sized venues with rich, dynamic bass. With a 6 dB crest factor, it delivers a more moderate output of 122 dB (whole space) and 128 dB (half space), making it suitable for a variety of installations including restaurants, bars, hotels, corporate events, and performing arts venues. Its operating range of 35 Hz to 150 Hz ensures that it can handle a broad spectrum of low-frequency sounds, from deep sub-bass to punchy mid-bass, delivering an all-encompassing sound experience that complements full-range loudspeakers.

Thanks to its innovative ultra-low turbulence port design, the SB210 minimizes airflow noise, ensuring clean and powerful low-frequency output without unwanted distortion. This design maximizes the subwoofer's efficiency and allows it to perform exceptionally well in smaller enclosures. The subwoofer's 4-ohm nominal impedance, with a minimum of 4.5 ohms at 45 Hz, makes it compatible with a wide range of amplifiers, ensuring flexibility in a variety of professional audio setups. The recommended high-pass filter (HPF) of 35 Hz, with a 12 dB/octave slope, further protects the subwoofer and optimizes its performance for applications requiring tight and controlled bass.

Designed for professional installations, the SB210 Black features an integrated M10 mounting system and an M20 threaded pole mount, allowing for flexible rigging and secure placement in both permanent installations and mobile setups. Whether suspended in the air or mounted on a pole, the subwoofer can be easily integrated into a variety of spaces. The inclusion of two Neutrik NL4 connectors and a 2-pin barrier strip offers versatile connectivity options for seamless integration into existing sound systems. The SB210 also pairs well with the EAW UXA4403 amplifier, ensuring optimal power handling and maximum performance from the subwoofer.

Built to last, the SB210 Black features a robust Baltic birch plywood enclosure, which provides both strength and resonance control. The enclosure is finished with a durable, wear-resistant textured black paint, ensuring it maintains its professional appearance over time. The subwoofer is also equipped with 16 M10 suspension points for rigging, making it easy to integrate into overhead systems. With dimensions of 12 x 30 x 19.7 inches and a weight of 67 lbs, the SB210 is lightweight yet sturdy, making it easy to transport and install without sacrificing durability or performance.

Features

• 500W passive dual 10-inch subwoofer for high-output bass in a compact design
• Ultra-low turbulence port design for superior bass output and minimal distortion
• Operating range from 35 Hz to 150 Hz, delivering extended low-frequency performance
• Maximum SPL of 128 dB (whole space) and 134 dB (half space) with 12 dB crest factor
• Axial sensitivity of 89 dB (whole space) and 95 dB (half space) for consistent performance
• 4-ohm nominal impedance with a minimum of 4.5 ohms at 45 Hz for broad amplifier compatibility
• Designed for permanent installation in restaurants, bars, hotels, performing arts venues, and more
• Integrated M10 mounting system and M20 threaded pole mount for flexible rigging and installation
• Pair with EAW UXA4403 amplifier for optimal power handling and performance
• Built from durable Baltic birch plywood with a wear-resistant textured black finish
• Dimensions: 12 x 30 x 19.7 inches; Weight: 67 lbs for easy installation
• 16 M10 suspension points for secure rigging and 2-pin barrier strip and Neutrik NL4 connectors for flexible connectivity

Specifications

Performance

• Max SPL (12 dB Crest Factor):
  • Whole Space: 128 dB
  • Half Space: 134 dB
• Max SPL (6 dB Crest Factor):
  • Whole Space: 122 dB
  • Half Space: 128 dB
• Operating Range: 35 Hz - 150 Hz
• Axial Sensitivity:
  • Whole Space: 89 dB
  • 35 Hz - 120 Hz Half Space: 95 dB
• Input Impedance: 4 ohms nominal, 4.5 ohms @ 45 Hz minimum
• Recommended HPF: 35 Hz, 12 dB/oct
• Accelerated Life Test: 500 W @ 4 ohms

Configuration

• LF Transducer, Loading:
  • 2 x 10-inch cone, 2.5-inch VC
• Operating Modes: VLF, DSP with DynO

Physical

• Physical Rigging:
  • 16 x M10 suspension points
  • M20 Threaded pole mount
• Dimensions (HWD): 12 x 30 x 19.7 inches
• Net Weight: 67 lbs
• Shipping Weight: Approx. 72 lbs
• Mounting Accessories: 2 x Nuetrik NL4, 2-pin barrier strip