URB2405YMD-10WR3

• Wide range of input voltage (4:1)
• Efficiency up to 88%
• No-load power consumption as low as 0.2W
• Isolation voltage : 1.5K VDC
• Operating temperature range : -40°C to 85°C
• Input under-voltage protection, output over-voltage protection, short circuit protection, output over-current protection
• Meet CISPR22/EN55022 CLASS A
• International standard pin-out
• A2S (wring mounting) and A4S (TS35 rail mounting) products featuring anti-reverse connection for input

Input Specifications

• Input Current (full load / no-load) : 502mA/5mA
• Reflected Ripple Current : 40mA
• Input impulse Voltage (1sec. max.) : -0.7mA
• Starting Voltage : 100VDC max
• Input under-voltage Protection : 6.5VDC
• Input Filter : Pi filter
• Starting Time : 10ms
• Ctrl
• • Module switch on : 3.5-12VDC
  • Module switch off : 0-1.2VDC
  • Input current when switched off : 6mA

Output Specifications

• Output Voltage Accuracy : ±1%
• Balance of Output Voltage : ±0.5%
• Line Regulation : ±0.2%
• Load Regulation : ±0.5%
• Cross Regulation : ±5%
• Transient Recovery Time : 300µs
• Transient Response Deviation : ±3%
• Temperature Drift Coefficient : ±0.03 %/7°C
• Ripple & Noise : 40mV p-p
• Trim : ±10%VDC
• Output Over-voltage Protection : 160%Vo
• Over-current Protection : 160%
• Short circuit Protection : Continuous, Self-recovery

General Specifications

• Isolation Voltage : 1500VDC
• Isolation Resistance : 1000MΩ
• Isolation Capacitance : 1000pF
• Switching Frequency : 400 kHz
• Operating Temperature : 40°C to 85°C
• Storage Temperature : -55°C to 125°C
• Storage Humidity : 5~95 %RH
• Max. Casing Temperature : 105°C
• Lead Temperature : 300°C
• Vibration : 10-55Hz, 10G, 30 Min. along X, Y and Z
• MTBF : 1000K Hours
• Weight : 28g
• Cooling : Free Air Conversion
• Case Material : Aluminium Alloy