SKU: 11738818794

Driven Diesel Overboost Annihilator 99-03 7.3L Ford Powerstroke

$89.95 $99.95
Save 10%
No.2 Bestseller on martinetexier.com >

Pay in installments of $24.99 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 19 - Jul 24

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Driven Diesel Overboost Annihilator 99-03 7.3L Ford PowerstrokeThe computer in your 99 03 7. 3L Powerstroke Diesel equipped vehicle will turn on the light at about 24psi of boost (some calibrations may come on at lower pressures) a pressure easily attained by today's high performance chips, tuners and modules. At the same time, the computer will reduce fueling (power) in an effort to bring the boost pressure down. This reduced power mode will remain in effect until the PCM sees enough continuous operation without

The computer in your 99-03 7.3L Powerstroke Diesel equipped vehicle will turn on the light at about 24psi of boost (some calibrations may come on at lower pressures)...a pressure easily attained by today's high performance chips, tuners and modules. At the same time, the computer will reduce fueling (power) in an effort to bring the boost pressure down. This reduced power mode will remain in effect until the PCM sees enough continuous operation without the fault (usually a few minutes of driving), the ignition is cycled or the code that tripped the SES light is cleared electronically.

The Driven Diesel easy to install "Overboost Annihilator" kit will prevent the computer from setting the SES light and defueling the engine FOR AN OVERBOOST CONDITION (the light may still light for other reasons)...maintaining full power at ALL boost levels. This kit is pre-set to show your MAP sensor a maximum of 22-23psi.

**Monitors that read boost from the MAP sensor will stop at the pre-set max of the Overboost Annihilator

This kit works simply by preventing the MAP sensor from seeing more boost than we want by means of a regulator...a mechanical solution to a mechanical problem.

Please be aware that installation of this device DOES NOT GUARANTEE that you will no longer get an SES light at about 24psi of boost. PLEASE SCAN YOUR TRUCK and make sure that you are purchasing this product to cure a P1249 or P0238 code BEFORE ordering. If you still get an SES light after installing this product, please CLEAR YOUR CODES, DRIVE THE TRUCK TO GENERATE A NEW SES LIGHT AND READ THE CODES AGAIN...you are only having an Overboost issue if you are STILL getting a P1249 or P0238 code. It is very common for P1211 "Injection Pressure" codes to happen under heavy throttle about the same time the truck is making it to 24psi of boost...making it seem like an overboost issue.

WARNING: This device is designed to allow boost pressures in excess of those considered "safe" by Ford Motor Company. Operating a stock Ford turbocharger at higher than recommended boost levels can reduce it's service life. Use at own risk.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 11738818794

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 6 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
P
Verified Purchase
pease4pod
Birmingham, US
★★★★★ 5
Excellent Investment!
Color: Black, Style: ET-2800-B, Pattern Name: Printer
I have had this printer for two years now. I purchased it to do invitations and signs for my Daughter's baby shower. I designed an invitation, printed more than sixty copies with address labels, return address labels, numerous signs, games and raffles tickets. I used it again for the Baby's 1st Birthday same amount of items. I have not had to fill the colored ink in over 2 years. I have filled the black. My husband also uses it for work and I've printed several other projects including pictures. Everything has always exceeded my expectations. For the price you get excellent quality. I find the software easy to use and update.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 11, 2026
T
Verified Purchase
Tom B
Belleville, US
★★★★★ 5
Inkjets have come a long way
Pattern Name: Printer, Style: ET-15000
Just a lot to like about this printer and nothing I don't like. Very capable for the price. I do mostly black and white printing, rarely print photos. (This will supposedly do a credible job of photo printing too but I haven't tried it). If you want professional caliber photo printing, you probably want the Epson 8550 which is similar to this, a bit more expensive, but does 6 color printing. If you are doing more like every day business printing the 15000 might be a better choice because it's built more for speed. The tank system means I can just replace the black because I use it a lot. The black ink tank is double size of the others and based on my experience so far, I think I'll easily get over a thousand pages on the standard-vivid setting which is very strong black but still relatively high speed printing. Given that the black ink bottles are under $30 I think the cost per page will be comparable to laser. The booklet/pamphlet printing can be complicated to work out with layers of PDF software and the Epson printer driver. But once you work it through, it's super capable. I've printed a lot of 12 x 18 double-sided for booklets and the paper handling has been flawless. (It can duplex automatically for 8 1/2 x 11 but for other sizes you have to manually duplex, which you can do by printing back/front or even/odd.) It's not as fast as a laser printer but it's pretty fast -- inkjets have improved so much.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
L
Verified Purchase
Loleta Harlan
Lake Worth, US
★★★★★ 5
Perfect Printer for My Small Business
Pattern Name: Printer, Style: ET-15000
I purchased the Epson ET-15000 for my crafting and apparel business and have been very pleased with its performance. The print quality is excellent, colors are vibrant, and the large ink tanks help save money over time. It handles larger print sizes with ease and has become an essential part of my workspace.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 3, 2026
W
Verified Purchase
wwise
Natrona Heights, US
★★★★★ 5
Nice large format printer which is what I needed
Pattern Name: Printer, Style: ET-15000
I make stained glass panels and needed a printer that I could make larger copies with. I also wanted one that I could manipulate my images with. This was my best option and I love the Eco-Tank printers. After reading the reviews I made sure to add a couple years of additional warranty for my peace of mind. Finding 13 x 19 paper that was affordable was a tough challenge. I found a bunch on FB marketplace and bought everything they had to offer. This printer was very easy to set-up. I just followed the instructions and then followed what was on my computer screen. At first I thought I would have an issue connecting to Wi-Fi but when it failed on the computer, I was able to go to the printer and do it from the control panel - Easy peesey. I have used it several times since filling, charging, and installing and everything works as it should. My husband has an Eco-Tank printer and I've wanted one since he got his. I love that the ink will last a very long time and that it will be cost efficient. I am not overly interested in photo printing so this was the perfect choice for my needs. The print quality is fairly good when comparing it to my old Canon and e that there are several paper trays and ways to make copies, especially the automatic feed and the larger scanner bed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 26, 2026
J
Verified Purchase
JC
Cuba, US
★★★★★ 1
document feeder not working on first real use.
Pattern Name: Printer, Style: ET-15000
Serious reliability issues and concerns. We have owned the printer for about 1 month and printed a limited amount. For the first time today I tried scanning with the document feeder. I was scanning about 12 pages that should of been 1 document. The first page scanned and then stopped. I started the scanner again and it scanned about 5 pages and then jammed. The rest of the pages were a constant jamming/not feeding fiasco. I would run to the computer and hit scan, then run to the printer and manually push on the paper as hard as i could without the paper bending. if I pushed just right i could get a few pages through without jamming. I ended up with about 6 pdf's instead of one document and constant jamming in the paper feeder. Frustrating from a brand new printer and the first time using the paper scanner. There is a clicking noise when it scans. a few of the pages fed properly but the rest had to be forced. No obvious obstructions or other issues. I tried cleaning the rollers with no success. Then attempted to reach out to Epson support. The only support option I could find was an email form that put me in a captia loop after entering all the information so I had to start over on the ticket submission. No chat support, no phone number, brand new higher priced printer with serious build/reliability issues. Frustrating.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 14, 2026

recommand products

Hella Heels LipKit 8inch Boots - Dream On
135.00
Lunalae Free Flow High Waist Shorts - Black
35.00
Pleaser USA Flamingo-1021 8inch Peep toe Boots - Patent Baby Pink
69.00
Shark Polewear Boston Shorts - Treasure Garden
23.25
Clutch Friction Plate Kit Set for Kawasaki ZR900 Z900 17-24 ZR1000 Z1000 16-23
19.77