VicVibro WS.50

VicVibro WS.50The VicVibro WS is an anti vibration and homogeneous elastomeric support system for gypsum board partitions. The transversal holes, provides the necessary space for the rubber expansion to increase the deflection and consequently the vibration insulation. The inclined flaps of VicVibro WS cover the fixing bolts on the base and prevent possible contact with gypsum board. The application of VicVibro WS in floating gypsum board partitions: Decreases the

The VicVibro-WS is an anti-vibration and homogeneous elastomeric support system for gypsum board partitions. The transversal holes, provides the necessary space for the rubber expansion to increase the deflection and consequently the vibration insulation. The inclined flaps of VicVibro WS cover the fixing bolts on the base and prevent possible contact with gypsum board.


The application of VicVibro WS in floating gypsum board partitions:

• Decreases the flanking noise transmissions.

• Interrupt the heat-bridges and the increase of moisture between humid floors and walls.

Installation

The VicVibro WS is installed on floor or ceiling metal profiles (U-runner with width 50, 75 or 100mm) in correspondence to the wall studs or it could also be installed unified. They can be fixed on the profiles with bolts and on floor or ceiling with expansion bolts.
 The free spaces must be filled with sound absorption material (e.g. Vicycle, or rockwool), to seal cavities.
 Part or all of base’s lateral flaps, of VicVibro WS, can be cut easily due to its incisions, for applications with smaller thickness (e.g. single gypsum board) than the flap’s length. Attention: Metal washer must be also used in every fixed point