SKU: 18772696026

DAHUA IPC-HFW3249E-AS-IL 2MP Smart Dual Light Fixed-focal Bullet WizSense Network Camera

$40319.07 $44798.97
Save 10%
No.2 Bestseller on martinetexier.com >

Pay in installments of $11199.74 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 6 - Aug 11

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

DAHUA IPC-HFW3249E-AS-IL 2MP Smart Dual Light Fixed-focal Bullet WizSense Network CameraIPC HFW3249E AS IL 2MP Smart Dual Light Fixed focal Bullet WizSense Network Camera > 2 MP 1 2. 9" CMOS image sensor, low luminance, and high definition image. > Outputs max. 2 MP (1920 1080)@25 30 fps. > H. 265 codec, high compression rate, ultra low bit rate. > Built in multi core light, the max. IR distance is 50 m and the max. warm light distance is 50 m. > ROI, SMART H. 264+ H. 265+, AI H. 264 H. 265, flexible coding, applicable to various

IPC-HFW3249E-AS-IL

2MP Smart Dual Light Fixed-focal Bullet WizSense Network Camera

> 2-MP 1/2.9" CMOS image sensor, low luminance, and high definition image.
> Outputs max. 2 MP (1920 ×1080)@25/30 fps.
> H.265 codec, high compression rate, ultra-low bit rate.
> Built-in multi-core light, the max. IR distance is 50 m and the max. warm light distance is 50 m.
> ROI, SMART H.264+/H.265+, AI H.264/H.265, flexible coding, applicable to various bandwidth and storage environments.
> Rotation mode, WDR, 3D NR, HLC, BLC, digital watermarking, applicable to various monitoring scenes.
> Intelligent monitoring: Intrusion, tripwire (the two function support the classification and accurate detection of vehicle and human).
> Abnormality detection: Motion detection, video tampering, scene changing, audio detection, no SD card, SD card full, SD card error, network disconnection, IP conflict, illegal access, and voltage detection.
> Alarm: 1 in, 1 out; audio: 1 in, 1 out; supports max. 512 G Micro SD card; built-in Mic.
> 12 VDC/PoE power supply.
> IP67 protection.
> SMD 4.0.
> Supports AI SSA.
> SMD area can be set in warm light areas that support triggering alarms.


Camera

Image Sensor

 

1/2.9" CMOS

Max. Resolution

 

1920 (H) × 1080 (V)

ROM

 

256 MB

RAM

 

1 GB

Scanning System

 

Progressive

Electronic Shutter Speed

 

Auto/Manual 1/3 s–1/100,000 s

Min. Illumination

 

0.002 [email protected] (Color, 30 IRE)

0.0002 [email protected] (B/W, 30 IRE)

0 lux (Illuminator on)

S/N Ratio

 

>56 dB

Illumination Distance

 

Up to 50 m (164.04 ft) (IR)

Up to 50 m (164.04 ft) (Warm light)

Illuminator On/Off Control

 

Auto;Manual

Illuminator Number

 

2 (Multi-core (IR + warm) light)

Angle Adjustment

 

Pan: 0°–360°

Tilt: 0°–90°

Rotation: 0°–360°

Lens

Lens Type

 

Fixed-focal

Lens Mount

 

M12

Focal Length

 

2.8 mm; 3.6 mm; 6 mm

Max. Aperture

 

F1.4

Field of View

 

2.8 mm: H: 100°; V: 55°; D: 117°

3.6 mm: H: 83°; V: 44°; D: 98°

6 mm: H: 51°; V: 28°; D: 60°

Iris Control

 

Fixed

Close Focus Distance

 

2.8 mm: 0.7 m (2.30 ft)

3.6 mm: 1.1 m (3.61 ft)

6 mm: 2.7 m (8.86 ft)

DORI Distance

Lens

Detect

Observe

Recognize

Identify

2.8 mm

44.0 m

( 144.36 ft)

17.6 m

( 57.74 ft)

8.8 m

( 28.87 ft)

4.4 m

 

( 14.44 ft)

3.6 mm

55.7 m

( 182.74 ft)

22.3 m

( 73.16 ft)

11.1 m

( 36.42 ft)

5.6 m

 

( 18.37 ft)

6 mm

88.6 m

( 290.68 ft)

35.4 m

( 116.14 ft)

17.7 m

( 58.07 ft)

8.9 m

 

( 29.20 ft)
DORI (Detect, Observe, Recognize, Identify) is a standard system (EN-62676-4) for defining the ability of a person viewing the video to distinguish persons or objects within a covered area. The numbers in this table do not reflect intelligent function distances. For intelligent function distances, refer to installation and commissioning manual/project design tool.

Intelligence

IVS (Perimeter Protection)

 

Intrusion, tripwire (the two functions support the classification and accurate detection of vehicle and human)

SMD

 

SMD 4.0

AcuPick

 

Uses deep learning algorithms and works with back-end devices to accurately match targets, such as people and motor vehicles, and search through live and recorded videos to quickly locate targets.

AI SSA

 

Adopt deep learning algorithms to adjust the parameters of the image to suit the conditions.

Smart Search

 

Work together with Smart NVR to perform refine intelligent search, event extraction and merging to event videos

Video

Video Compression

 

H.265; H.264; H.264H; H.264B; MJPEG (Only supported by sub stream)

Smart Codec

 

Smart H.265+; Smart H.264+

AI Coding

 

AI H.265; AI H.264

Video Frame Rate

 

Main stream: 1920 × 1080@(1–25/30 fps)

Sub stream: 1920 × 1080@(1–25/30 fps)

Third stream: 1920 × 1080@(1–25/30 fps)

*The values above are the max. frame rates of each stream; for multiple streams, the values will be subjected to the total encoding capacity.

Stream Capability

 

3 streams

Resolution

 

1080p (1920 × 1080); 1.3M (1280 × 960); 720p (1280 × 720); D1 (704 × 576/704 × 480); VGA (640 × 480); CIF (352 × 288/352 × 240)

Bit Rate Control

 

VBR;CBR;ABR

Video Bit Rate

 

H.264: 3 kbps–8192 kbps;

H.265: 3 kbps–8192 kbps

Day/Night

 

Auto(ICR)/Color/B/W

BLC

 

Yes

HLC

 

Yes

WDR

 

120 dB

Scene Self-adaptation (SSA)

 

Yes

White Balance

 

Auto; natural; street lamp; outdoor; manual; regional custom

Gain Control

 

Auto/Manual

Noise Reduction

 

3D NR

Motion Detection

 

OFF/ON (4 areas, rectangular)

Region of Interest (RoI)

 

Yes (4 areas)

Smart Illumination

 

Yes

Smart Dual Light

 

Yes

Defog

 

Yes

Image Rotation

 

0°/90°/180°/270° (Support 90°/270° with1080p resolution and lower)

Mirror

 

Yes

Privacy Masking

 

8 areas

LDC

 

Yes

Audio

Built-in MIC

 

Yes, built-in Mic

Audio Compression

 

PCM; G.711a; G.711Mu; G.726; G.723

Alarm

Alarm Event

 

No SD card; SD card full; SD card error; network disconnection; IP conflict; illegal access; motion detection; video tampering; tripwire; intrusion; scene changing; audio detection; voltage detection; external alarm; SMD; security exception

Network

Network Port

 

RJ-45 (10/100 Base-T)

SDK and API

 

Yes

Network Protocol

 

IPv4; IPv6; HTTP; TCP; UDP; ARP; RTP; RTSP; RTCP; RTMP; SMTP; FTP; SFTP; DHCP; DNS; DDNS; QoS; UPnP; NTP; Multicast; ICMP; IGMP; NFS; SAMBA; PPPoE; SNMP; P2P

Interoperability

 

ONVIF (Profile S & Profile G & Profile T & Profile M); CGI

User/Host

 

20 (Total bandwidth: 64 M)

Storage

 

FTP; SFTP; Micro SD card (support max. 512 GB); NAS

Browser

 

IE: IE11;

Chrome;

Firefox

Management Software

 

Smart PSS Lite; DSS; DMSS; DoLynk Care

Mobile Client

 

iOS;Android

Cyber Security

 

Video encryption;Firmware encryption;Configuration encryption;Digest;WSSE;Account lockout;Security logs;IP/MAC filtering;Generation and importing of X.509 certification;syslog;HTTPS;802.1x;Trusted boot;Trusted execution;Trusted upgrade;Session security;Security warning

Certification

Certifications

 

CE-LVD: EN62368-1;

CE-EMC: Electromagnetic Compatibility Directive 2014/30/EU

Port

Audio Input

 

1 channel (RCA port)

Audio Output

 

1 channel (RCA port)

Alarm Input

 

1 channel in: wet contact, 5 mA 3–5 VDC

Alarm Output

 

1 channel out: wet contact, 300 mA 12 VDC

Power

Power Supply

 

12 VDC/PoE (802.3af)

Dual Power Backup

 

When the power adapter and PoE provide power at the same time, disconnect one of them. The device will continue to work, but will not restart.

Power Consumption

 

Basic: 2.9 W (12 VDC); 4.5 W (PoE);

Max.: 6.8 W (12 VDC); 9.1 W (PoE) (H.265 + WDR + warm light + intelligence on)

Environment

Operating Temperature

 

–40 °C to +60 °C (–40 °F to +140 °F)

Operating Humidity

 

≤95% (RH), non-condensing

Storage Temperature

 

–40 °C to +60 °C (–40 °F to +140 °F)

Storage Humidity

 

≤95% (RH), non-condensing

Protection

 

IP67

Structure

Casing Material

 

Metal

Product Dimensions

 

192.7 mm × 70.5 mm × 66.4 mm (7.59" × 2.78" × 2.61") (L × W × H)

Net Weight

 

610 g (1.34 lb)

Gross Weight

 

770 g (1.70 lb)
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 18772696026

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 26 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
Verified Purchase
314
Whiting, US
★★★★★ 5
Works very well. Very easy to set up.
Configuration: 1-pack, Style: without eero Plus
Previously just had the standard wifi router provided by ATT with fiber connection. It was fine really but some parts of the house lacked good signal. Purchased the 6 Pro E and put the ATT router in bridge mode, the Eero instructions on doing that were perfect and it worked. The 6 Pro E was up and running in minutes and did it's own software updated immediately. Was super easy to rename the network, set the password and permissions and every single device that was previously on the old router connected seamlessly on it's own without any intervention. I think possibly one 2.5GHz device may not have auto-connected but it connected just fine once I put it in pairing mode. We have a lot of devices, mixed 5ghz and 2.5ghz, and so far both networks broadcast fine and everything works. Also 5th Gen Echo Dots seamlessly boost the wifi signal and I already had those in nearly every room before getting the Eero 6 Pro E. Few things to note: I don't pay for Eero Plus subscription so I don't use any of the extra reporting features. New devices connect with what looks like a random code or with a manufacturers name, which usually does not help identify what it is. That can be a challenge when you're trying to figure out if it is something you just added or someone else who managed to get in passed the firewall. Googling the name that shows up does not always help figure out what it is. For some reason my iphone reconnects every few weeks as a "new device" with a name of "unknown device". This does not happen with my husband's iphone. This means that at any given time there is one active "unknown device" and several others that are inactive with that name. Looks like eventually they drop off the recently connected inactive list. Even if I rename it to something specific, after a few weeks it will reconnect as if it's brand new and I'll get an Eero notification that a new device has connected. It is frustrating to have to continually check the app to make sure it's just my own phone and not something intruding. The Eero devices have a Zigbee hub built-in but my recent purchase of motorized Alexa compatible shades with Zigbee motors had issues. They connected sort of, but were not functioning in the Alexa app even though both Eero and the shade manufacturer said they should work. Eventually I had to also buy 2 older 4th gen Echo's that also have a Zigbee hub built-in, only then would they be found by Alexa and then they started working in Alexa app with voice and scheduling. However, adding the old 4th gen echos created two more issues: While every single other device in my house on other floors away from the Eero 6 Pro can connect just fine because I have 5th Gen Echos in most rooms boosting the mesh coverage, for some reason, the 4th Gen Echo placed on the second floor could not connect to the 6 Pro E router on the first floor. I had to end up buying a second Eero 6 for the second floor to act as a booster up there as well. Only then did the second floor 4th Gen Echo connect to wifi and stay connected. That's very odd because everything else on the second floor and in the basement and detached garage had no issues connecting to either the wide array of 5th Gen Echos or to the main 6 Pro E on the first floor. The second new issue... the Eero devices are set to roam automatically which is the point of mesh coverage. However, the Zigbee shades hated that feature and would constantly bounce from the nearest 4th Gen Echo to the 6 Pro E and back. Each bounce made them "unresponsive" in the Alexa App. Eventually I had to turn off that roaming feature in the Eero app settings so that every device now connects to whichever Echo or Eero it sees first and then stays there. Defeats the purpose of having mesh but it was the only way to make the $2000 worth of "smart" shades actually work with the network and Alexa.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 22, 2025
P
Verified Purchase
Patrick Calder
Whiting, US
★★★★★ 4
Having trouble deciding if this is right for you? Read this.
Configuration: 3-pack, Style: without eero Plus
I'm only two days in to this, but I want to leave a review to help others who went through the same ordeal I have. This Eero Pro 6E has replaced an Orbi R750 system which I purchased in 2021 and used with two satellites. The Eero has some pros and cons over the Orbi. First, the reason for my replacement: while the Orbi still gives good coverage and speed, the stability of the wifi network has significantly decreased in the last year or so. I've done a lot of research on this and the only thing I can think of is that the Orbi 750 is rated for "40+" devices. I have "Smart Homed" my house and have 40-50 devices in total connected. Additionally, my wife owns a hair salon which operates out of our home so we have a guest wifi for that. So, I think that while theoretically the Orbi should still be fine, in practice it can't deal with more than 40 or so devices and starts "cycling through them" causing some devices to disconnect and reconnect repeatedly. I live in a rural area where cell signal is lousy, so you notice it very quickly when your device loses connectivity - especially if you are streaming. What good is my 65" OLED TV with wifi sound and my $300 a month cable and internet bill if I can't use the damn thing? So, on the Eero. I bought the three unit package since it was on sale (I'd actually initially bought the 2 unit package, and they went on sale the day afterwards so I returned it and ordered the 3 set. One complaint is that while I think you should get a "bulk deal" by ordering a 3 pack over a 2 pack over a single unit, but it's a huge difference. The 3 pack was $350 which equals $116 each. To buy just one if you misjudged how many you need, would be another $160.) Set up was quite simple, and was all done through the app. So it gets +1 for ease of use. As others have noted, there is no web log in and without the Eero plus subscription, there isn't much beyond set up and maintain the wifi. For the majority of users this is likely to not be a problem. Due to my recent wifi challenges, I wanted to use the analytics function of the app to see how the new coverage compared to the old. You can't do that without the plus subscription. So that's strike 1. However, you can set up the Guest network and basic things like that with the regular app access, so at least there's that. Likewise, adding each additional unit was pretty easy. What I recommend you do is download an app like WiFiman (which seems pretty legit) after you set up your first Eero and walk around with the shortcut function on in the WiFiman app which will tell you the signal strength as you move about. I would say right about the limit of where it stops being either "Excellent" or "Good" is where you need to place your next Eero unit. "Excellent" ensures the best quality, but if you have a lot of space to cover you'd need to stretch it to "Good". I will note here that unlike the Orbi, which has a router and two (or more) satellites, each Eero unit is functionally identical, so it doesn't matter which one you grab first, and which one are the satellites. It's easy to add the next Eero device from the app even if you didn't immediately select "Add another device" after the first one. Like I said, I recommend walking around and getting an idea of your coverage needs before adding the next ones anyway. So that's a +1, again for ease of use. However, I notice compared to the Orbi that its range and speed drops off much faster the further you get. So, you're not going to get the overall quality range. I noticed this while out doing yardwork this morning - my phone would stay on the Orbi wifi a hundred or so feet from the house. It loses the Eero wifi (or, the quality goes way down) at the same range. So this is another point that I guess I knew, but is important to remember: at range, the speed at which you transmit decreases despite what your internet connection actually is. So, for example, my service provider gives me 1000 mb/S service which is reasonably fast. Standing next to the Eero unit which is connected to my modem via the ethernet cable gives me close to that speed. But, get a dozen feet away with a wall in the way, and you are down to about 400 mb/s. As stated, the Orbi has better range and the speed keeps up better. But what good is range and speed if you are constantly getting booted off the Wifi? Supporting my max device theory, I'd often get booted off the Orbi wifi somewhat predictably at various times in the day. Last night, on the new Eero network, it didn't happen! I was able to stay connected the whole time. (As was my mother in law in the in-law apartment, so not having to deal with that is a major plus!). So stability is a +2 on the score scale. Finally, if you're like me and have several dozen Wifi devices you don't need to worry about the new Eero units and compatibility - as long as you name your new Wifi network the same and keep the same password, the devices don't know the difference. They connect to the new network the same way they'd go back to your old one as if it were nothing more than a power outage. So, ultimately the Eero 6E is a little slower and gives a little less coverage than the Orbi 750....but unlike the Orbi it says it will take "100+" devices...and it *works*. At least so far. That said, I'd definitely get it on sale. While functionality is always key, the fact is the features are much less than many competitors. It might not be worth the full price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 20, 2025
V
Verified Purchase
Victoria N.
Grantham, US
★★★★★ 5
Great Upgrade — Worth Every Penny
Configuration: 3-pack, Style: without eero Plus
We previously used the dual‑band eero 2 model, and it served us fairly well. After doing some research (and getting a little help from Copilot), we upgraded to the eero Pro 6E — and the difference has been incredible. We bought the 3‑pack, but quickly realized that 2 units easily covered our entire home (~2,000 sq ft). It’s not a loss, though; we’ll leave 2 behind for the family when we move and bring the extra 1 with us and we can buy another single unit later if needed. For context, we pay for 800 Mbps, but with our old modem/router combo we were only getting 70–150 Mbps in most rooms. Zoom calls were hit‑or‑miss, and the layout of our house doesn’t help — the modem is stuck in the far right corner of the house, and moving the line would require some construction/rewiring = $$$. After installing the eero Pro 6E, we’re now consistently getting 350–680 Mbps in every room, and even our garage pulls around 300 Mbps. That’s roughly an 80% improvement without touching any wiring. Setup was straightforward. Since we have a modem/router combo, the only tricky part was remembering to turn off the router portion. Once the main eero was connected, our devices automatically joined the new network since we kept the same Wi‑Fi name and password. From there, placing the second unit halfway through the house filled in the weak spots that we use to have. The speed and stability have been game‑changing for our hybrid/WFH household. We run Ring cameras, smart plugs, a MyQ garage opener, Google devices, and smart lights. For the smart lights, garage and smart locks, I had to manually reset the wifi though and 2 out of 7 of the ring cameras. Pros - Very easy to set up, especially if you’ve used eero before - The app makes managing devices, checking status, and updating Wi‑Fi info simple - Excellent coverage for homes with dead zones or awkward layouts - Truly plug‑and‑play — anyone can get this running Cons - It’s definitely pricey (we were lucky to have a gift card that covered most of it) - Much larger than the older eero 2 units — about 2.5× the size - Works best elevated on a table, so don’t leave it on the floor Overall, if you’re struggling with weak speeds, dead spots, or a modem stuck in a bad corner of the house, the eero Pro 6E is absolutely worth considering. It made a dramatic difference for us.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 25, 2026
A
Verified Purchase
A. Sudol
Pawtucket, US
★★★★★ 1
Wanted to like this, but had to return... and return was not easy.
Configuration: 3-pack, Style: without eero Plus
This review is on the EEPRO 6E tri-band mesh. I'm not a network novice so after my bad experience I wanted to warn people away from this product. In my 25 years working in technology infrastructure I've acquired experience, network certifications, etc believe me when I claim I'm not stupid. I live in a three floor house on an acre lot so have little external signal penetration into my home. All rooms I wired with Cat6 for gigabit ethernet. My internet service is 1Gb; from the wire I speed test at 800 Mbps down and the same upload. No one in my family wants to plug in anymore so we all rely on three independent wireless routers connected by wire and bridged into the network: a netgear nighthawk (2,4Ghz and 5Ghz bands) on floor two, a Verizon gigabit router (2,4Ghz and 5Ghz bands) on floor three and an apple extreme (2.4Ghz band ) on floor one in the basement. From my apple phone (12 pro) I consistently get 550Mbps download and 300-400 upload except on the basement router where my office is. I wanted a mesh to improve signal handoff and for my office to get the same as the rest of the house. I picked this one because I read good things and the price was discounted compared to the orbi which at $2,000 I just could not bring myself to buy. The installation of the first node was easy (connect to the wire and run the app) on the second floor, the second node complained it was out of reach on floor 1 (directly under node one & connected to the ethernet wire). After two attempts to find it, it worked. The third one was a nightmare. Tried putting it on the other side of the house and connect to ethernet and just would not pickup. I had to bring it one room away from node one before it picked up. Job done? Well the first day I had 450 Mbps download and 400 upload everywhere. Thinking I was happy. Next day, "Dad we have no wifi!". My wife tells me she was dropping connections from her laptop all day within 20 feet of node 2. I thought ok I'll reset the system. Re-input all their devices with fresh connections. That worked for 24 hours. Next day, I'm sitting in the room with node2 and it affect me; 1Mbps download .01 Mbps upload. I renew my connection, no fix. Reset the system and back to 450 Mbps. I check any firmware updates, nope all current. I thought maybe the node below #2 was too close, so moved it an additional 15 feet away to lessen any signal cancellation. Next day,"Honey why did you buy this, it slower and worse than our old system?'. Yep it's time to return. So the old network went back in and all iphones and macbooks are happy again. Here is the worst part, the return. I initiate the return, pack it all nice and find out I can't drop it off at the UPS store. Why? Because Amazon will only process the return if they pickup from my home. Ugg, but fine. Here is where it goes downhill...you have to wait for a phone call from the carrier to arrange a pickup. After a week of waiting for a call and answering numerous telemarketer garbage calls, I decided to call back customer service and find another way because I have to travel for work and can't wait at my house for a phone call. The only other way - is to pay for shipping yourself. So um why can a return label or QR code be processed for anything else but not this product. Very Dodgey. Do yourself a favor and pick another system or maybe the mesh is just not worth it. PS. I did find out that the system ( even though it has a 2.5Mbps network port) is rated as one of the slower systems when it works. I could never get it as fast as my existing netgear with is over 2 years old.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 20, 2022
C
Verified Purchase
Customer in Oregon
Massapequa, US
★★★★★ 5
FULL POINTS!!!
Configuration: 2-pack, Style: without eero Plus
After repeated, torturous attempts with other routers to replace the wifi network provided by our beloved Apple Time Capsule, we are relieved and thrilled to have landed on the 2-unit eero Pro 6E router. Hallellujah! Among other things, the eero routers (and their mesh) were trivial to set up, the support was great (and barely needed), and a great surprise, the eero routers automatically connect to our wifi-aware HP LaserJet M401dw printer (via a feature in the eero routers called Universal Plug and Play, or uPnP), so that I don't have to choose the printer's wifi before printing. And oh yeah, the eero routers' mesh covers our 1,600-sq ft house nicely, with great signal speed and strength, and automatically chooses my Mac's fastest wifi speed. TIP (old news to most of you, I presume): To provide additional ethernet ports from the routers, I bought and installed the inexpensive, high quality "NETGEAR 5-Port Gigabit Ethernet Unmanaged Switch (GS105NA)", which required no setup at all, except that the switch must be connected to either of the eero routers after the eero router is connected to your cable modem, so that your ethernet service can recognize the additional ports provided by the switch. My only complaint is that setting up the eero routers requires a cell phone, and as I love macOS for its legacy self-evident user interface, I hate cell phones! But that said, set up with the cell phone was trivial. So... FULL POINTS!!! PS. Despite searching hard, I never found a router that supported Time Machine backups via wifi, which was possible with the Apple Time Capsule. Instead, I have adopted Apple's present guidance to make Time Machine backups to an SSD (removable flash drive). I use two, keeping one in the house and one in the car and swapping them with every backup. Works fine, but I miss Steve Jobs!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 9, 2026

recommand products

Junk Science and the American Criminal Justice System
54.95
Julius Caesar
11.00
Dama Bianca By Xerjoff Eau De Parfum Spray 1 Oz(D0102Ha7B6A)
165.82
La Girl Luminous Glow Illuminating Powder(D0102H2Cmgw)
11.80
Kenzo Homme By Kenzo Edt Spray 37 Oz(D0102H5Hzwp)
45.57