Portable Lifeguard Stand, Vista Series, 6-FT

Portable Lifeguard Stand, Vista Series, 6-FTThe 6 Vista Lifeguard Stand is a moderate to tall lifeguard chair and is intended for use at temporary, semi permanent and permanent sites. Seating Height is 6 Feet. Overall Height is 111. 75 inches. Color: Radiant White. Footboard: The observation platform (footboard) of the 6 Vista Lifeguard Stand measures 1 1 2 x 30" x 42" and is a solid laminated fir core covered with fiberglass reinforced acrylic. The top surface is a non skid sanded tread.

The 6’ Vista Lifeguard Stand is a moderate to tall lifeguard chair and is intended for use at temporary, semi-permanent and permanent sites.   Seating Height is 6-Feet.    Overall Height is 111.75-inches.  Color:  Radiant White.

Footboard: The observation platform (footboard) of the 6’ Vista Lifeguard Stand measures 1-1/2” x 30" x 42" and is a solid laminated fir core covered with fiberglass-reinforced acrylic. The top surface is a non-skid sanded tread.

Steps: The four (4) steps are constructed of black molded plastic and are set in the ladder at a 15 ̊ angle to facilitate mounting of the stand. They are a nominal 5” x 20 and come with all necessary stainless steel hardware.

Frame: The frame is constructed of type 304 polished stainless steel tube with 1.90” O.D. x .065 wall. The front base section is fitted with two (2) 10” fulcrum covers, which add stability and absorb shock. The rear base section is fitted with plastic rail end plugs to protect deck, and wheels to facilitate movement of the stand.  The stand is equipped with an umbrella holder and rescue tube holder.

Swivel Stand: The base column of the swivel stand assembly is constructed of 1.90” O.D. x .065 wall, Type 304 stainless steel.  At the lower end of the column is affixed a .25” (6.4mm) stainless steel plate which serves as a mounting flange. This flange is attached in tandem with the observation platform (footboard) to the platform supports.

Seat w/ Swivel: A special swivel mechanism is attached to the upper end of the swivel stand base column to allow for a 360 ̊ rotation of the contoured, low-side fiberglass seat.

Depending upon installation design, local codes, and site requirements, this model is suitable for use on both commercial and competition pools. In addition, these stands are well suited for use as judging and observation stands on tennis courts and other sporting sites, especially those where permanent installation is not required.

Ships via Motor Freight carrier.