SKU: 2066259189

Apoc Industries Ladder / Traction Bars 85-97 Ford F-250 4WD

$390.69 $434.10
Save 10%
No.2 Bestseller on martinetexier.com >

Pay in installments of $108.53 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 12 - Aug 17

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Apoc Industries Ladder / Traction Bars 85-97 Ford F-250 4WDTake control of axle wrap and wheel hop with our heavy duty traction bars engineered for your OBS Ford. Designed to fit the 19851997 F 250 4x4, these bars provide the traction and stability your truck needs for towing, off roading, or high torque launcheswithout compromise. Key Features Tailored Fitment: Engineered specifically for 19851997 Ford F 250 with rear leaf spring suspensionHeavy Duty Tubing: Built from thick wall steel for superior strength

Take control of axle wrap and wheel hop with our heavy-duty traction bars engineered for your OBS Ford. Designed to fit the 1985–1997 F-250 4x4, these bars provide the traction and stability your truck needs for towing, off-roading, or high-torque launches—without compromise.

Key Features

Tailored Fitment: Engineered specifically for 1985–1997 Ford F-250 with rear leaf spring suspension
Heavy-Duty Tubing: Built from thick-wall steel for superior strength and long service life
Polyurethane Bushings: No noisy heims—just quiet, durable performance
Axle Wrap Elimination: Keeps your rear axle stable under hard acceleration or load
Bolt-On Axle Brackets: No welding required—installation is straightforward with included brackets
Bolt-On Frame Mounts: Uses precision brackets with polyurethane bushings for a solid yet forgiving connection
American Made: Built in-house using quality materials and craftsmanship
Durable Powder Coat Finish: Protective and professional

What’s Included

  • Left and right traction bars

  • Axle-side bolt-on mounting brackets

  • Frame-side bracket assemblies with polyurethane bushings

  • Grade 8 hardware for frame-side installation

  • Step-by-step installation instructions

Installation Details

  • Install Time: ~2–3 hours

  • Tools Required: Standard hand tools and a drill

  • Skill Level: Intermediate

Note: Only bolt-on axle brackets are included. Frame-side mounts are also bolt-on. Some drilling is required. Factory hardware is not reused.

Fitment

  • 1985–1997 Ford F-250 (4x4 models only)

  • Supports nearly all lift heights

  • For use with leaf spring rear suspension only

Why Upgrade?

Axle wrap leads to wheel hop, traction loss, and driveline wear—especially with bigger tires or heavy loads. These traction bars prevent unwanted axle rotation and keep your rear end planted and predictable, whether you're towing, off-roading, or just driving hard.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 2066259189

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.0 ★★★★★
Based on 23 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
T. Lee
Los Angeles, US
★★★★★ 5
Worked for me! Definitely recommend!
Used a whole can in my 2009 Civic 1.8L with 150k miles. I can honestly say, this helped remove a lot of sludge out of the engine. The oil came out with a water-like texture and super dark! Before taking out the oil filter, I added new lower cost oil to the engine and let the engine run for about 5 minutes to get that extra flush! You can definitely see all the extra sludge in the new oil! Drained and refilled with new oil and filter. The engine definitely sounded quieter and smoother than before! If you value your car, I would definitely recommend doing this flush on your higher mileage cars every 50k miles or so! Definitely recommend this LiquiMoly product!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2025
J
Verified Purchase
JJ
Dallas, US
★★★★★ 5
3rd Update! See review... Good stuff and works as advertised...
Update - 3rd oil change/flush. Engine oil draining from engine is waaaay cleaner than my first flush. Probably won't need to do a 4th time for several changes. I added Ceratec at this change and am amazed how much better the engine performs since my initial flush. Less clatter and very smooth idle. (Jeep 4.0 I6) Update- 2nd change and used the flush again. About 7000 miles from first use. The oil was cleaner and less "gunky" as first time but oil was definitely dirtier than normal. Right away noticed off idle throttle response improved. Then on a drive I take regularly with a mountain pass and long downhill I noticed that even tho the jeep downshifted out of OD it took much less throttle to hold 65 up a long grade. On the downhill normally I would see 50-60 mpg max on the digital readout. This time. It went to 99 which to me indicates more vaccum below the throttle plate. My guess is the rings freed up a bit more than the first flush and highway mileage is up to 23+ where I would get 21 before. Nice! Used in 2001 Jeep Grand Cherokee. 140k miles and a ticking lifter (common in the 4.0 - 6 cylinder...). Definitely cleaned sludge (oil filter very heavy!) and oil was dark when draining. Idles smoother, oil stays cleaner longer, slight oil pressure increase and runs cooler. The lifter still ticks but probably a cam lobe issue. Will use it after 7500 miles or 1 year. Will report back after next change.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 22, 2017
J
Verified Purchase
J N Brown
Carnegie, US
★★★★★ 5
Tips and tricks
I watched several videos by professionals who used this. Follow instructions. Make sure the engine is warm before you put it in. Make sure you have everything you need. The biggest tip I got that was repeatedly emphasized by the pros was to buy a “cheap” oil in addition to the new oil. After you run the flush drain the oil and flush. Put the cheap oil in and “rinse” the inside of the engine with the cheap oil. Then drain again. Replace the oil and filter with your good stuff. I followed these instructions or suggestions and…. I sat in the truck while the flush was running. It’s a 13 year old truck with 150,000 miles. It was running strong but burning oil and kind of loud. Sounded like it was growling. There were some ticking type noises that made me nervous. As I sat in the truck and let the flush cycle through the engine at idle I could literally hear the flush working. Very slowly it was like someone gave the engine a Xanax and you could hear it getting quieter and calming down. I drained, rinsed with cheap oil only letting the cheap oil run through at idle for another 15 minutes then drained again. The oil flush was clearly important. It didn’t come out as black as the first drain but it looked like old nasty oil. The truck is no longer burning oil. My gas mileage has increased significantly and it is running so quiet and smooth it’s unbelievable. I used a little less of the liquid Molly flush than it called for regarding the flush to oil ratio. I didn’t want to do something too intense to the inside of the engine. But the results were remarkable. Just as advertised after following the instructions. I also added the liquid Molly oil additive to the final oil change to ‘lube’ the inside of the engine. I plan to do another flush in about 10,000 miles. All that to say, yes, you won’t be disappointed as long as you follow instructions and a few tips and tricks. My truck is almost running like a brand new truck and again it’s an old and tired truck. I will use this as part of a high mileage maintenance and perform the flush every 50,000 miles or so. I feel confident it will extend the life of my engine based on the results
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 9, 2024
C
Verified Purchase
ChimChim
Natrona Heights, US
★★★★★ 4
Seems to have helped
Bought a used 2020 Jeep Sahara 2 liter turbo charged with 80k miles from a dealership. Dealership had just changed oil the day of purchase. Drove it home 30 miles down interstate and another 20 back roads, it ticked and tapped allot at idle and the dip stick was varnished. I added the flush, let it idle for 10 minutes and drained it. The new oil from the dealership drained out jet black, no light could pass thru it. I changed the oil with Walmart oil and a cheap oil filter and let it idle for 5 minutes to clean out all the engine flush, it drained out clean and clear. I refilled it with Pennzoil Platinum High Mileage oil and a Fram Ultra Synthetic oil filter. It's been a week and the engine is noticeably quieter and smoother since using this product. If nothing else it cleaned allot of carbon from inside of my engine.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 25, 2025
T
Verified Purchase
The Inspector
Houston, US
★★★★★ 5
HOLY CRAP!!!!
So my 2005 Durango has a 5.7 and I put on 253,000 miles on it before it blew a head gasket. Since it was summer, iI decided I'd tackle it myself. The upper end was so full of gunk, I can't believe I hadn't had serious issues. Anyway, I apparently dropped some pieces of crud down the oil channels, 'cuz after putting it all back together, I got alarms for low oil pressure. Figuring I'd try anything else before replacing the oil pump, i gave this stuff a try. WOW!!!! Not only did the oil pressure return, the engine runs SO much smoother! I had forgotten how smooth it ran when it was new. The caveat is that apparently the gunk was the only thing keeping some areas from leaking - as it lost oil at a startling rate. 1 bottle of the Liqui Oil Saver though, and within a week the oil leaks completely stopped.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 8, 2025

recommand products

Knowby's Incantation - Zombie Apocalypse (SLD-1354) - Secret Lair Drop / Knowby's Incantation (Borderless) Foil
10.09
Soul Warden (SLD-1708) - Secret Lair Drop (Borderless) Foil
16.05
Stitch - Rock Star (Store Championship) (30) - Disney Lorcana Promo Cards Holofoil
141.13
Wurmcoil Engine (BRR-063) - The Brothers' War Retro Artifacts
10.23
Madam Mim - Purple Dragon (Enchanted) (208/204) - Rise of the Floodborn Holofoil
42.90