Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 10 - Jul 15
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Fabspeed Porsche 981 Boxster/Cayman TrackTec Valved Bypass Exhaust SystemFabspeed's esteemed sporty Maxflo Exhaust tone with a raw, race car roar and extra power at the press of a button thanks to muffler bypass valves. One exhaust, two unique tones. Fabspeed engineers are always tinkering, and we wanted to try something a little different. We incorporated muffler bypass valves into the inlet pipes of our Maxflo Exhaust system to unleash an additional raw, race car like tone at the press of a button. The prototype system
Fabspeed's esteemed sporty Maxflo Exhaust tone with a raw, race car roar and extra power at the press of a button thanks to muffler bypass valves. One exhaust, two unique tones.
Fabspeed engineers are always tinkering, and we wanted to try something a little different. We incorporated muffler bypass valves into the inlet pipes of our Maxflo Exhaust system to unleash an additional raw, race car like tone at the press of a button. The prototype system received an abundance of attention, a positive response, and power was picked up; Fabspeed is proud to offer the unique TrackTec Valved Bypass Exhaust for those looking for something special.
With valves closed, the familiar sporty, refined tone of the Maxflo mufflers offers a pleasing level of sound with no droning. With one press of the factory Sport button or Fabspeed valve remote, exhaust is free to travel unrestricted through 48mm dump tubes bypassing the mufflers. A frenzy of burbling and crackling erupts with every application of the throttle. A thunderous roar permeates the cabin at just the right volume level. Turn up the volume and turn heads to the tune of an increase of around 15whp and 19ft-lbs of torque at 4000RPM.
FEATURES:
- Fits all Porsche 981 Boxster/Cayman vehicles (2013-2016)
- Includes Deluxe Dual-Style Tips in your choice of finish
- Improves horsepower and torque by around 15 whp and 19 ft-lbs at 4000 RPM
- Saves 6 lbs from the rear of the vehicle compared to the full OEM exhaust system
- Does not trigger Check Engine Light
- Constructed from high quality 14-16ga CNC mandrel-bent T304 stainless steel for maximum performance and durability
- Noticeable improvement in sports car sound and throttle response
- Direct replacement for the OEM muffler with no cutting or welding required
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 1650 reviews
Sort
Product Reviews
★★★★★ 5
Excellent Car Sound Deadening and Heat Insulation Solution
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
If you're looking for a high-quality car sound deadening and heat insulation material, then the Siless Liner 157 (4 mm) mil 36 sqft is definitely worth considering. This product is designed to offer superior noise reduction and heat insulation for your car, making your driving experience more comfortable and enjoyable.
The closed-cell foam material used in this product is of premium quality, and it effectively blocks out external noise and vibrations. This means you can enjoy a quieter and more peaceful ride, even on noisy roads. In addition, the Siless Liner 157 also provides excellent heat insulation, which can help keep your car cooler in hot weather.
One of the best things about this product is that it's very easy to install. You don't need any special tools or equipment, and the material can be easily cut to fit any shape or size. It's also very lightweight and flexible, which makes it easy to work with.
Overall, the Siless Liner 157 (4 mm) mil 36 sqft Car Sound Deadening Closed Cell Foam & Heat Insulation mat is an excellent choice for anyone looking to improve the comfort and performance of their car. It's a high-quality product that delivers on its promises, and it's definitely worth the investment.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 12, 2023
★★★★★ 4
Heavy-Duty That Works!
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
This extreme sound deadening mat performs well for reducing road noise and vibration. It feels dense and adheres securely when properly applied. Once installed, it noticeably improves interior quietness.
Overall, it’s a strong choice for more serious sound insulation projects.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 12, 2026
★★★★★ 5
Good product, quite sticky I must say.
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
Worked for my van insulation
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2026
★★★★★ 5
Good stuff
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
Good stuff, easy to use, self adhesive backing contours around curves easily and works great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 29, 2026
★★★★★ 5
Works amazingly, but only if you install it correctly.
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
If you purchasing Siless Liner 157 mil (4 mm) Sound Deadening mat, to block unwanted sounds in your car, this is what you need to buy. But wait! It's not the only thing you need to buy if you want to "actually" deaden sound.
By itself, it will definitely block a noticeable amount of sound, and, most likely, that's all you realistically need. But... But... If you want the Siless Liner Sound Deadening Mat to really help you take it up a few notches, to get the best sound almost bordering on soundproofing, listen up.
You will have to install traditional butyl rubber first. Doesn't have to be the Siless brand, but I'm sure they would love to sell both to you, I used both Killmat (80mil) and Noico (50mil).
I have a Honda S2000. It's a two-seater convertible sports car if you don't know what this car is, and it's loud when I'm driving above 60mph. I also happen to have a sound system installed as well. Other than that, the car is stock. I first installed the butyl rubber on the car's interior sheet metal. I went all out and covered everything I could. I didn't need to but I wanted to. I was extremely impressed with the results. But I wanted to go further. Not because I needed to but because just wanted to see what it would be like.
So I bought Siless Liner 157 mil (4 mm) 36sqft Sound Deadening mat to go on top of the butyl rubber mats. I put this over every area I installed the butyl rubber. I had to be careful of clearance issues since I added a significant amount of underlayment, and you should too.
If you put butyl rubber sound-deadening materials in 50% of the total interior area, you'll hear a noticeable improvement. If you put butyl in about 80% of the total area, you'll be even more amazed at the improvement, compared to before.
I originally did all the above myself, so that's my experience and so your mileage may vary.
I then installed the Siless Liner Sound Deadening mat over every place I could even going further than I could with the butyl rubber. I used the Siles Liner in areas where butyl rubber would not have been effective, such as the roll bar hoop area and large empty cavities or holes.
I covered everything I could, firewall, doors, floor pan, transmission tunnel, trunk, trunk lid, fuel tank area, rear quarter panels, and rear-wheel tunnels, in Siless Liner Sound Deadening Mat.
WOW!! The Siless Liner Sound Deadening Mat was the icing on the cake! Let's not forget, this car is a convertible sports car so it will never be a quiet ride, ever. But I can now actually have a conversation with a passenger at a normal-ish volume! This also means I can now have a normal hands-free phone call without having to plug one ear to block out the noise! My sound system sounds so much better! Just by going through the install process, I looked for any vibration, rattle, squeak, and noise-prone areas to either eliminate or reduce unwanted noise production. If you forget this step, the inside and outside of your car will rattle and buzz. I skipped this step the first time around. But did it right before I installed more butyl rubber and the improvement was impressive, especially inside the car. Outside the car, I didn't notice a difference until I put the last layer of Siless Liner Sound Deadening Mat. The sound deadening mat works both ways from what I can tell. If I turned up my music, as loud as I occasionally do, parked in the attached garage to the house, with the garage door closed, I would be barely able to tell the car was playing music in the garage. It sounds like it is another car, just a little bit down the street, with a very loud base. If you stand 20 feet away outside the car, the sound system is noticeable, but not obnoxious by a long shot.
Get a 3 piece wood/metal roller set as well, which makes quick work of large areas.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 23, 2021