SKU: 22923096739

Victron Busbar 250A 6P/Terminals & Cover

Sale price$85.87 Regular price$95.41
Save 10%

Pay in installments of $23.85 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 5 - Aug 10

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Victron Busbar 250A 6P/Terminals & CoverHigh Current Power Distribution for Marine, RV, and Solar Systems When wiring high capacity battery banks, inverters, and DC loads, relying on direct battery terminal connections often leads to dangerous clutter and voltage drops. The Victron busbar 250A 6P provides a professional, highly efficient central distribution point for heavy duty DC electrical circuits. Rated for up to 250 Amps and handling voltages up to 70V DC, this distribution block is

High-Current Power Distribution for Marine, RV, and Solar Systems

When wiring high-capacity battery banks, inverters, and DC loads, relying on direct battery terminal connections often leads to dangerous clutter and voltage drops. The Victron busbar 250A 6P provides a professional, highly efficient central distribution point for heavy-duty DC electrical circuits. Rated for up to 250 Amps and handling voltages up to 70V DC, this distribution block is the ideal solution for robust 12V, 24V, and 48V systems found in off-grid solar setups, marine vessels, and mobile power configurations.

Engineered for Maximum Conductivity and Low Resistance

At the core of this power distribution solution is a high-quality tin-plated copper busbar strip measuring 5 x 24 mm. Copper is renowned for its exceptional electrical conductivity, while the heavy-duty tin plating provides critical protection against oxidation and corrosion. This ensures that your electrical system maintains optimal current flow and minimal voltage drop, even in harsh coastal or humid environments where standard components may degrade over time.

High-Torque Stainless Steel Terminals

A common point of failure in generic power systems is weak terminal connections that loosen over time due to vibration or thermal cycling. To combat this, the Victron busbar features six 5/16 inch (approx. 8mm) stainless steel terminal studs. These heavy-duty studs allow for high-torque tightening (up to 13 N.m), creating a highly secure mechanical and electrical connection for heavy gauge cable lugs. The unique insert-moulded design eliminates the need for separate securing nuts underneath, providing a rigid anchor point that will not spin or break loose during installation.

Protective Busbar Cover and Flame-Retardant Safety

Safety is paramount when dealing with high-amperage DC power. An accidental short circuit across exposed terminals can cause catastrophic damage or fire. This unit includes a dedicated busbar cover made from durable black ABS plastic, which shields the live connections from dropped tools, loose conductive materials, and accidental contact. The mounting base itself is constructed from UL 94 V-0 rated flame-retardant ABS, providing an extra layer of thermal protection. Furthermore, the raised bus configuration allows for straightforward wire routing, creating a clean, highly organised installation that simplifies future maintenance.

Key Features and Benefits

  • 250A Maximum Current Rating: Handles heavy loads from large inverters, solar charge controllers, and battery banks.
  • 70V DC Maximum Voltage: Perfectly suited for standard 12V, 24V, and 48V nominal battery systems.
  • Six 5/16 inch (approx. 8mm) Studs: Ample connection points for main feeds and high-draw branch circuits.
  • Tin-Plated Copper Strip: Delivers superior conductivity and excellent long-term corrosion resistance.
  • Stainless Steel Hardware: Allows for secure, high-torque connections that withstand heavy mobile vibration.
  • Flame-Retardant Construction: UL 94 V-0 base and UL 94 V-2 cover enhance system safety against excessive heat.

Eliminate Battery Terminal Clutter

Stacking multiple heavy-duty ring terminals onto a single battery post is a well-known risk factor for poor contact, increased resistance, and excessive heat generation. By migrating your main distribution cables to a dedicated 200 amp busbar or higher capacity 250A model, you isolate the mechanical stress from the battery terminals and ensure every circuit receives a clean, low-resistance connection. This practice drastically improves system reliability and troubleshooting speed.

Secure your high-current DC circuits with a proven, professional-grade solution. Add the Victron 250A 6-way busbar to your electrical system today to ensure safe, highly efficient power distribution across your entire setup.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 22923096739

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 24 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Tony Nowikowski
West Palm Beach, US
★★★★★ 1
TPMS Compatability is a LIE
Size: Sedan, Crossover, Small Truck
2018 Subaru Impreza, with one tire with a slow leak (about 2 PSI a week) that I couldn't trace. I bought the "Full-Size Sedan, Small Truck, Crossover" kit (the 6 oz. pouch) based on my tire size, 225/40/18. After I removed the valve core, attached the dispensing hose and opened the cap, the product would not flow into the tire. I squeezed the pouch, but that only made the product leak out around the valve stem onto the wheel and driveway. I tried rotating the tire so the valve stem was at the top, and and also at the bottom. I even took the wheel off so I could get a fully vertical flow. Nothing worked. I finally gave up after only about half the product was dispensed, and I do think most of it went somewhere other than in the tire. I reinstalled the valve core, remounted the wheel, plugged in my little lighter socket-powered compresseor, and tried to inflate the tire. And ... NOTHING. The pressure reading on the compressor immediately shot up to over 100 PSI, and it automatically shut off. Tried multiple times, with the same result. I again removed the valve core, and a) no air came out of the tire when I removed it, and b) even with no valve core the compressor still would not pump air into the tire. Clearly the gunk had completely blocked the valve/TPMS. Fortunately, when I took the tire to Costco (where I'd bought it), they were able to fix the damage I'd done, as well as patching a small nail hole in the tread I hadn't seen (that was clearly the source of the slow leak) for no charge. Since I've already submitted a refund request, ultimately all it really cost me was my time and effort ... and a whole lot of stress.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 26, 2024
R
Verified Purchase
raspree56
Fort Morgan, US
★★★★★ 5
Forget the gooey stuff, this product WORKS! See UPDATES 1 and 2
Size: Compact Car, Mid-size Sedan
I've had a slow leak in one of my tires for some time. It's a common thing with chrome plated alloy wheels, they get corrosion on the bead area where the tire seals and then you get a slow leak. This was the only product which is water soluble so it's not going to make a permanent mess inside the tire; additionally, it contains tiny bits of Tufsyn which is the material some tires are made from. So it's not just a liquid that is sealing the leak, it's tiny bits of rubber. I was putting 5 or 6 lbs of air in my tire every few days, and I could see that the tire was getting low. I installed this TireJect per the instructions a week ago and the tire appears to be doing great, despite the fact that we've had some very cold weather. (I didn't want to check it with a gauge while it was this cold out because just in case the tire's valve didn't seal all the way; I'll check with a gauge when this cold snap is past.) While I can't say for 100% sure that there is no more leak, I suspect that the leak has been sealed up completely. This is a product unlike the others and I think it's worth the price. FIRST UPDATE: It has been two months and I haven't had to add any air at all to the tire where I used this product. There was a slow rim leak which was losing about a pound or so per day and it has been totally fixed. The car has sat for several days a few times, including in single digit cold weather, as well as driven regularly otherwise, and the tire hasn't lost any air. I think it's the micro Tufsyn fibers in this product which seal leaks better than some goopy glue stuff other brands are made of. I totally recommend this product! SECOND UPDATE - it's been eleven months since I added this to my tire with the slow rim leak and I have not had to add air a single time. Not once. THIS STUFF WORKS. Forget the slime and foam and get this.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 5, 2024
J
Verified Purchase
Jesse
Fort Morgan, US
★★★★★ 5
TireJECT cannot work miracles
Size: Compact Car, Mid-size Sedan, Size: Compact Car, Mid-size Sedan
TireJECT is a surprisingly thin fluid that supposedly contains fibers that must help stop up holes. Frankly I'm still confused as to how this stuff can plug a leak, but apparently it does. Tons of reviews say so. I say apparently because the product did not completely stop a slow leak in my tire, but that's OK. I knew it likely wouldn't. I'll have to replace the tire unfortunately. I had a garage install four nearly-new tires on my car. After installing, a heavy leak was discovered in one of them. They took the tire off again and found a small tear near the rim/bead of the sidewall. Since the tear would be flat against the rim, they suggested to let them try and repair it with tire patch adhesive and lots of bead sealer. They were confident, so I went for it. It seemed to work, but it went flat a few days later. TireJECT seemed like the perfect solution to the slow leak since I wouldn't have to disturb the repair. I bought the kind without the syringe and regretted it immediately upon trying to use it. First, the valve stem removal tool broke as it loosened it. I had to buy a new tool down the road. When I went to inject, I squeezed as hard as I could but it just wouldn't flow past the TPM. It also kept leaking out of the flex joint of the nozzle. I had a huge syringe on hand, so I sucked up the rest from the bag, ziptied the hose on both ends and got the rest of the product into the tire. HURRAY! The tire pressure had fallen considerably by the next morning. BOOOoo. I contacted TireJECT, and after several emails (and long waits in between). They determined their product was not suitable for my use case. They refunded what I paid without me even asking. I really appreciated that. That said, before injecting, the tire would go flat overnight. So, TireJECT does work to a good degree. I'm half tempted to overdose the tire with another package. Give TireJECT a try! Though, be sure your situation matches their criteria. If you have a TPM, opt for the package that comes with a syringe. You will need it. Also, throw the cast pot metal, tire stem tool out and get a decent machined one before you do the repair. Thank me later.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 1, 2025
D
Verified Purchase
D. T.
Natrona Heights, US
★★★★★ 5
Works once again!
Size: Compact Car, Mid-size Sedan
Third time using TireJect on a vehicle, and it's worked perfectly each time. First was the off-road formula for leaking motorcycle tire beads.... then this formula my light SUV with a slow leak until I could get the tire replaced. This was for a stubborn tire that had a leak SOMEWHERE, and usually would lose 10-15 psi overnight after a fill-up. Two days later, still fully inflated and no signs of trouble. This is great because this formulation is also okay for tire pressure sensors. Will continue to purchase this product for similar issues going forward. High quality, durability, and easy to use.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 29, 2025
R
Verified Purchase
Rodney Hahn
Omaha, US
★★★★★ 5
Works like a champ!
Size: Full-size Truck, SUV
It works great! I had one fairly slow leak and 2 very slow leaks. 3 Tires. 2 were on my 94 Ford Ranger. I put a little more than 1/2 the packet in my fastest leaking tire (on the Ranger) and about 1/4 of the packet in the 2nd tire of the same vehicle. Lastly, I put the final 1/4 in a very slow leaking tire on my 2000 Ford F-150. All tires have stopped leaking!! I am delighted with the effectiveness of this product!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026

recommand products