AA Can-Am X3 Turbo Billet Wastegate Kit | 115-1016

AA Can-Am X3 Turbo Billet Wastegate Kit | 115-1016Kit fits all 2017 Up Can Am X3 turbo models The standard 5 11psi wastegate kit is adjustable from 5. 5psi to 8psi with the installed spring and also includes an optional 7 11psi spring. This works excellent for those needing a little more crack pressure than can be achieved with the OEM wastegate, especially in higher altitudes. The 5 8 psi wastegate spring that comes in the actuator kit allows you to easily adjust for those running our tunes that

Kit fits all 2017-Up Can-Am X3 turbo models The standard 5-11psi wastegate kit is adjustable from 5.5psi to 8psi with the installed spring and also includes an optional 7-11psi spring. This works excellent for those needing a little more crack pressure than can be achieved with the OEM wastegate, especially in higher altitudes. The 5-8 psi wastegate spring that comes in the actuator kit allows you to easily adjust for those running our tunes that require the crack pressure to be at 6.5-8psi Factory crack pressure is 5.5-6psi (2017 X3 models) and 7-8psi (2018+ X3 models) and unlike others on the market, the 5-11psi actuator kit can be set to a true stock PSI setting so you don't get over boost when setting up your wastegate on a stock X3. Great replacement for your worn out wastegate actuator. As springs age and with more run time, they wear out. This may cause a low boost condition resulting in less power and more heat created. We also have a 7-18psi wastegate kit that has a 7-11psi actuator spring, with an optional 14-18psi spring. This should only be used for custom applications where the tune is built for the higher pressure actuator. Easy to adjust crack pressure when or if needed. Installation is not hard but normally takes 1 to 1.5 hours. Instructions included. We highly suggest adding our wastegate pressure pump to properly set this valve up to the correct crack pressure If running AA tunes, see the tune product description as it will list proper crack pressure needed with tunes (If not listed, 5.5-6psi is standard) 5 to 11 PSI Actuator Kit Part Number: 115-1016-A 7 to 18 PSI Actuator Kit Part Number: 115-1016-B