Bambu Lab PLA Sparkle 1.75mm Filament 1kg

Bambu Lab PLA Sparkle 1.75mm Filament 1kgBambu PLA Sparkle is a next level aesthetic filament that combines strength and sparkle. With metal particles included in its composition, Bambu PLA Sparkle adds a special sparkling look to your prints that sets them apart from the rest. However, it is not recommended to use a 0. 2 mm nozzle for printing as clogging may occur. Take your 3D printing projects to new heights with Bambu PLA Sparkle! Features Special Sparkling Look Relatively High Impact

Bambu PLA Sparkle is a next-level aesthetic filament that combines strength and sparkle. With metal particles included in its composition, Bambu PLA Sparkle adds a special sparkling look to your prints that sets them apart from the rest.

However, it is not recommended to use a 0.2 mm nozzle for printing as clogging may occur. Take your 3D printing projects to new heights with Bambu PLA Sparkle!

Features

• Special Sparkling Look
• Relatively High Impact Strength
• Comes with Basic Reusable Spool
• Diameter: 1.75mm +/- 0.03mm

Accessory Compatibility

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Recommended Printing Settings

• Drying Settings before Printing - 55 °C，8 h
• Pringting and Keeping Container's Humidity - < 20% RH (Sealed, with Desiccant)
• Nozzle Temperature - 190 - 230 °
• Bed Tempreature (with PVP Glue) - 35 - 45 °C
• Printing Speed - < 250 mm/s

Physicial Properties

• Density - 1.26 g/cm³
• Vicar Softening Temperature - 57 °C
• Heat Deflection Temperature - 55 °C
• Melting Temperature - 156 °C
• Melt Index - 34.2 ± 3.3 g/10 min
  

Mechanical Properties

• Tensile Strength - 39 ± 3 MPa
• Breaking Elongation Rate - 11.7 ± 0.7 %
• Bending Modulus - 2350 ± 140 MPa
• Bending Strength - 75 ± 4 MPa
• Impact Strength - 66.5 ± 3.6 kJ/m²

Includes

• 1x Filament & Desiccant
• Instructions & Spool sticker
• 1x Filament Label

Instructions for Printed Spool

When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).

Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.

Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.

Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).

Step 2. Tear apart and pull out the plastic strips.

Browse more

• Browse all Bambu Lab Filament
• Browse all Bambu Lab X1 3D Printer, Spare Parts & Accessories
• Browse all Bambu Lab P1P/P1PS 3D Printer, Spare Parts & Accessories
• Browse all Bambu AMS Spare Parts & Accessories
• Browse all Bambu Lab A1 Mini 3D Printer, Spare Parts & Accessories
• Browse all Bambu Labs
• Browse all Printer Spare Parts
• Browse ASA Filament
• Browse ABS Filament
• Browse Nylon Filament
• Browse PC Filament
• Browse PETG Filament
• Browse PLA Filaments (also PLA+)
• Browse PVA Filament
• Browse Silk Filament
• Browse Speciality Filament
• Browse TPU Filament 
• Check out all our 3D Printing Supplies