Polymaker PolySupport for PLA 1.75mm Filament 750g

Polymaker PolySupport for PLA 1.75mm Filament 750gPolySupport is a break away support for a variety of Polymaker filaments. It has a perfect interface with PLA, strong enough to support it and easily removable by hand. Features Peel Away PolySupport is a dedicated support material engineered to break away easily by hand without the risk of damaging the part. PolySupport offers the quickest part clean up of any support material. Its advantage over dissolvable support is that its faster to remove and

PolySupport™ is a break away support for a variety of Polymaker filaments. It has a perfect interface with PLA, strong enough to support it and easily removable by hand.

Features

• Peel Away - PolySupport™ is a dedicated support material engineered to break away easily by hand without the risk of damaging the part. PolySupport™ offers the quickest part clean-up of any support material. Its advantage over dissolvable support is that its faster to remove and requires no tools or equipment. For geometric overhangs such as boxes, architectural models or brackets, PolySupport™ will offer a better experience than dissolvable support.
• Wide Material Support - PolySupport™ has been engineered to have excellent compatibility with PLA and depending on the part geometry it can be an ideal support material for PVB and TPU based filaments from Polymakers portfolio.
• Low Moisture Sensitivity - PolySupport™ is less sensitive to moisture compared to other support materials like PVA and requires no solvents so you can immediately peel supports away without waiting for them to dissolve.
• Improved surface quality - Improve the surface quality where supports interface with your prints when using PolySupport™.
• Uncompromised Quality - Polymakers leading quality control process and rigorous in-house testing ensure reliable printing and consistency across spools and batches

Printing Settings

• Nozzle Temperature: 220˚C – 230˚C
• Build Surface material: Glass, blue tape BuildTak® 
• Build surface treatment: Can apply PVA glue to the build surface
• Build plate temperature: 25˚C – 60˚C
• Cooling fan: ON
• Printing speed: 20mm/s – 40mm/s
• Works best with: PLA materials from Polymakers portfolio

Drying Settings

• 80˚C for 8h

Material Compatibilities

• PLA based material from Polymaker’s portfolio + +
• PETG based material from Polymaker’s portfolio –
• ABS based material from Polymaker’s portfolio –
• PC based material from Polymaker’s portfolio +
• PVB based material from Polymaker’s portfolio +
• TPU based material from Polymaker’s portfolio +
• Nylon based material from Polymaker’s portfolio – –

+ + support the model very well
+ generally support the model depending on its geometry
– generally doesn’t support the model depending on its geometry
– – do not support the model

Browse More 

• Browse Polymaker
• Browse ASA Filament
• Browse ABS Filament
• Browse Nylon Filament
• Browse PC Filament
• Browse PETG Filament
• Browse PLA Filaments (also PLA+)
• Browse PVA Filament
• Browse Silk Filament
• Browse SLA Resin
• Browse Speciality Filament
• Browse TPU Filament 
• Browse Carbon Fibre Filament