Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 13 - Jul 18
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Lemon RX LM0087T DSMP 10ch Telemetry Stabilizer, T-Plug Energy MeterHighlight The generation 2 DSMP 10 channel telemetry stabilizer is a complete redesign that provides the ultimate reliability, features and performance. DSMX DSM2 compatible, 10 channel full range telemetry stabilizer with full telemetry features including a built in barometer, altimeter, energy meter (Current, Voltage, mAh), and internal temperature sensor High sensitivity gyro with proprietary stabilization algorithm ensures responsive airplane
Highlight
The generation 2 DSMP 10-channel telemetry stabilizer is a complete redesign that provides the ultimate reliability, features and performance.
- DSMX / DSM2 compatible, 10-channel full-range telemetry stabilizer with full telemetry features including a built-in barometer, altimeter, energy meter (Current, Voltage, mAh), and internal temperature sensor
- High sensitivity gyro with proprietary stabilization algorithm ensures responsive airplane control for both electric and gasoline engine application
- High sensitivity gyro with proprietary stabilization algorithm ensures responsive airplane control for both electric and gasoline engine application
- BEC1 and BEC2 dual inputs allow high-reliability operation while improving setup for high current drain performance servo
- Built-in Delta, V-tail and Normal Wing mixer
- Supports stabilization with separated channel dual aileron operation
- Stabilization always-on feature allows nine usable channels on a 10-channel receiver
- Real-time variable stabilization gain control on channel 8
- All-channel failsafe
- Firmware health monitoring software stack and ultra-low operational voltage (3.6V) ensures high operation reliability
- Generation 2 SDR stack ensures the fastest channel searching and advanced algorithm for signal recovery with ultra-low-latency experience
- Antenna diversity improves the reliability of the wireless link
- Satellite port for additional signal diversity
- Gyro stabilization activation with either AUX2 or Gear channel
- 3 potentiometers for individual gain tuning
User manual
Reset stabilizer
- Connect power
- Hold F and B buttons (approximately 5 secs+) until all LED flashes randomly
- Press the C button. Multiple LEDs flash a few times to complete the operation
Bind with bind plug
- Insert bind plug on Channel 10
- Connect power
Bind without bind plug
- Connect power
- Hold the B button until the red LED flashes
Bind with a satellite without a bind plug
- Connect power
- Hold the B button until the red LED flashes
- Disconnect power
- Plug the satellite wire connector into the stabilizer
- Connect power
Failsafe
- Connect power to the receiver and ensure the servos are working with the transmitter
- Press the F button for 3 seconds until green changes from off to on and vice versa to change the failsafe setting. Channel value is saved as failsafe default at the time the green LED turns on.
- Turn off the transmitter and wait 2 seconds to ensure the failsafe is activated accordingly by ensuring there is torque generated with finger-pushing the servo linkage if it was to be set. Vice versa.
Stabilization activation switch
- Disconnect power
- Insert bind plug to channel 8
- Hold the C button
- Connect power. Wait for about 1 second until the 6 LEDs flash.
- Release the C button
- Press C to make changes within 3 seconds. Green = CH7, Blue = CH5.
- Wait for 3 seconds and remove the bind plug
Wing Mode and Dual Aileron
- Disconnect power
- Insert bind plug to channel 9
- Hold the C button
- Connect power. Wait for about 1 second until the 6 LEDs flash
- Check the receiver label/user manual to understand the referred LEDs' operation
- Release the C button
- Observe which red LED is flashing and brief press C to select the required mode
- Press C to toggle between settings. On means selected. Exit automatically in 5 seconds.
- Wait for 3 seconds and remove the bind plug
- Ensure transmitter mixing is set accordingly for dual aileron if stabilized dual aileron is to be configured.
Gyro direction
- Check the receiver label/user manual to understand the referred LEDs' operation
- Connect power and wait 1 second
- Hold the C button and wait for about 1 second until the 6 LEDs flash
- Release the C button
- Observe which red LED is flashing and brief press C to select the required mode
- Press C to toggle between settings. On means selected. Exit automatically in 5 seconds.
- Wait for 3 seconds and remove the bind plug.
V/I sensor calibration
- Turn on the receiver and transmitter. The telemetry report page may optionally be checked during and after calibration.
- Plug the V/I sensor. Make sure the required DC loading device such as a brushless motor with ESC as well as the current and voltage meter is connected.
- Press the F and B buttons together at the same time for 2 seconds but no greater than 5 seconds
- Observe 3 green LED flashes. Ensure 8.4V is provided to the V/I sensor.
- Press F or C button briefly
- Observe 3 red LED flashes
- Turn on the DC loading device by throttling the transmitter. Ensure 4A is drawing across the V/I sensor. Be careful with the motor spinning if it is to be used.
- Press the B button to save and exit.
V/I probe calibration
- Turn on the receiver and transmitter. The telemetry report page may optionally be checked during and after calibration.
- Plug the V/I sensor. Make sure the required DC loading device such as a brushless motor with ESC as well as the current and voltage meter is connected.
- Press the F and B buttons together at the same time for 2 seconds but no greater than 5 seconds
- Observe 3 green LED flashes. Ensure 8.4V is provided to the V/I sensor.
- Press F or C button briefly
- Observe 3 red LED flashes
- Press the B button to save and exit.
Gain setting
- Adjust via the 3 dials or real-time master gain on channel 8 depending on the transmitter channel's availability.
View setting LEDs with all on
- Press the C button briefly (no more than 2 seconds).
Lemon Rx products are tested to be compatible with Spektrum's DSMX and or DSM2 product (Spektrum, DSMX and DSM2 are the registered trademark of Horizon Hobby, Inc.).
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 2076 reviews
Sort
Product Reviews
★★★★★ 1
Very disappointing workmanship. Last time.
Size: X-Large, Color: Lavender, Size: X-Large, Color: Lavender
Shirt came in actually nice day packaged. But opening it up spots all over the shirt very wheat material sending it back back.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 8, 2025
★★★★★ 5
High quality polo
Size: 3X-Large, Color: Dark Grey
Can’t beat this price and quality. With mainstream polos is going for about $80. This is a steal for the same quality. Fits good. Price is nice. Keeps me dry the golf course.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 22, 2025
★★★★★ 5
Awesome and comfortable jacket. Fit perfect and very warm.
Awesome and comfortable jacket. Fit perfect and very warm. The value on this is really really good. Would recommend. Easy to clean and looks beautiful.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 1, 2026
★★★★★ 4
Nice Stylish Midweight Jacket
Color: Dark Grey, Size: Medium, Color: Dark Grey, Size: Medium
I ordered this jacket because I wanted something with a little my style to wear out to dressy casual occasions. This jacket fits the bill. It looks nice in that it's got a casual laid back feel but at the same time you could wear over a collared shirt and it would look good.
I am 5'10" and about 165 lbs. I normally wear somewhere between a medium and large depending on the brand. I ordered a medium and it fit well. The arms and body were both the right length, not too short like some other jackets.
The reason I took 1 star off was because this is advertised as a winter puffer jacket and I wouldn't really call it that. It is a mid weight jacket that can get you by in southern winters but anything really cold I wouldn't wear this. Plus it's not a "puffer" jacket. It just has a minimal quilted feel to it but most of it is just a polyester glossy sweatshirt feel.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 29, 2025
★★★★★ 5
Maelreg Does It Again
Color: Dark Grey, Size: Medium
I just wrote a review for another Maelreg product. They're all good! lol 21st century fabrics are here to save us! ;) This one is also really well made. I love the fit and feel. It's perfect for those mild fall/spring days where an extra layer of windproof protection is just really handy. The arms aren't insulated, so it's great for active outdoor ventures. I use mine for jogging over a poly/blend wicking tee. It lives at the office where I sometimes need a stylish overcoat in the A/C freezing office. I bought a size M for my 5'10" 175 lb. frame and it fits perfectly. Just long enough to sit at the top of my glutes. The front of the jacket has a nice contrast/sheen that you don't see everywhere, it's a nice style addition. The poly blend fabric adds a nice degree of flex to the fit, it's comfortable under a heavy overcoat or over a light thermal layer. Super easy to launder on cold/low, and really low temp iron to rid it of those packaging wrinkles, and its easy care forever. Great product at a really nice price point, all things considered.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 23, 2025
recommand products
Le Creuset Stone Ware Tea Pot RED OMBRÉ Tea Pot Only
37500.00
1:10 Model Car Chassis Frame Compatible with Toyan FS-S100GA S100A Single Cylinder Engine Series Engine
135.00
EASTER CANDLE HOLDER WITH WREATH
16250.00
ngh GT9pro 9cc Single Cylinder Two Stroke Air Cooled Gasoline Engine for Fixed Wing Drone
199.99
Peppermint Flavour Candy Canes 144g
4850.00