SKU: 61384462140

Copper-filled PLA based filament MetalFil - Classic Copper 1.75mm 1500 gram Natural Composite 3D Printer Filament

Sale price$158.40 Regular price$176.00
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 13 - Jul 18

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Copper-filled PLA based filament MetalFil - Classic Copper 1.75mm 1500 gram Natural Composite 3D Printer FilamentFormfutura MetalFil Classic Copper is a composite PLA (polylactic acid) filament that is gravimetrically filled with approximately 80% copper powder. The high copper content in MetalFil Classic Copper makes 3D printed objects nearly indistinguishable from genuine copper casted objects. MetalFil Classic Copper can be post processed with various patina effects. Unique features Very high copper filling of 80% Real copper look, heavyweight, and cold

Formfutura MetalFil Classic Copper is a composite PLA (polylactic acid) filament that is gravimetrically filled with approximately 80% copper powder. The high copper content in MetalFil Classic Copper makes 3D printed objects nearly indistinguishable from genuine copper casted objects. MetalFil Classic Copper can be post-processed with various patina effects.

 

Unique features

  • Very high copper-filling of 80%
  • Real copper look, heavyweight, and “cold” copper metal feel
  • Approximately 300% heavier than PLA (density of 3.4 g/cc)
  • MetalFil can be brushed, sanded, polished, waxed, coated and patina post-processed
  • Compatible with full metal, PEEK, and PFTE hotends
  • Compatible with direct drive and Bowden style extruders
  • Compatible with ≥ 0.4mm hardened nozzles with retraction settings enabled
  • Easy to post-process

Applications

  • Aesthetics, design, and art
  • Figurines and miniatures

General printing guidelines *

Nozzle size: ≥ 0.4mm

Layer height: ≥ 0.2mm

Experience level: Beginner

Print temp: ± 215 - 235° C *

Fan speed: 50-100%

 

Heat bed: ± 0 - 60° C

Enclosure needed: No

 

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There is a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

*) If blobs/lumps form around the nozzle then your print temperature is too high.

Post processing MetalFil - Classic Copper

Brushing and/or sand grinding

Once printed MetalFil - Classic Copper objects can very easily be brushed with a brass brush or sanded with fine-grit sandpaper. By brushing and/or sand grinding your printed object you will brush/shine up the high concentration of copper powders.

Build-in white polish feature

After being brushed and/or sanded MetalFil - Classic Copper will reveal its white polish feature. A very thin white layer/haze on your object will now allow you to easily polish your 3D print into a beautiful copper object.

Professional polishing with a rotary tumbler

Post-processing a MetalFil - Classic Copper 3D printed object with a rotary tumbler will make your FDM 3D printed object indistinguishable from genuine copper casted objects.

Patina post-processing

You can create several patina effects on MetalFil - Classic Copper printed objects in just one day time. With an ammonia and soda treatment you can for instance easily create a beautiful ancient green/blue weathering effect on your copper object.

Waxing and coating

After every above-mentioned post-processing measure, you can always wax or coat your printed object to get an incredible shine effect. Waxing can be done with products such as beeswax and for coating one can think about products such as XTC-3D.

Abrasiveness

Please be aware that MetalFil filaments contain a very high concentration of metal powders, which have an abrasive nature. In general, these metal powders will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend using nozzles from stainless steel or other hardened alloys.

Filament length

ρ: 3.4 g/cc

50 gr coil

0.75 Kg spool

1.5 Kg spool

Ø 1.75mm

± 6.1m

± 92m

± 183m

Ø 2.85mm

± 2.3m

± 35m

± 69m

 

Nozzle cleaning

When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle. This will make sure that any potential fillers are flown out of your nozzle. It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle.

 

Product export information

HS Code: 39169090

Description: Monofilament

Country of origin: the Netherlands

 

Compliance *

This filament is compliant with the below-listed directives and regulations.

  • RoHS directive 2011/65/EC
  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above-described products.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 61384462140

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.9 ★★★★★
Based on 1934 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
L
Verified Purchase
Ladybug27
Chelsea, US
★★★★★ 5
Best Balls Ever!!!
Size: Medium
These are the best balls ever! We have 2 very active ball loving dogs and these bounce very well and they actually hold up with active play and chewing. They still look brand new after daily use for months!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 15, 2026
D
Verified Purchase
David
Lowell, US
★★★★★ 5
Finally a ball my power chewers cannot destroy
Size: Medium
I have two dogs, an American Bully and an American Pit Bull Terrier, and both of them love to chew. Most balls last a very short time around here before they are shredded or missing big chunks. This one has actually held up. They chase it, tug on it and sit and chew on it, and it is still in one piece with no pieces breaking off. One of my favorite things is being able to put food inside. I add some kibble or small snacks, and they will happily sit and work on it for a long time. It keeps them busy, gives them something safe to chew, and they get a little reward while they play. When they are done, I just rinse it out and it is ready to go again. If you have strong jawed dogs that usually destroy toys, this ball is worth trying. Mine really enjoy it and I feel better knowing they finally have a ball that can keep up with them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 22, 2025
J
Verified Purchase
Jen Siefert
Boise, US
★★★★★ 5
My dog LOVES this ball
Size: Medium, Size: Medium
Does your dog destroy tennis balls in seconds? Yes? Then your dog NEEDS this ball! It's squishy like a tennis ball, fits in ball launchers (even the cheap ones) and bounces when it hits the ground. My dog has been literally playing with this ball all day and not a single mark on it! The only bad thing is that it does not float. Definitely worth the money! Put it in your cart!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 8, 2026
W
Verified Purchase
Wolf-Haven
Birmingham, US
★★★★★ 5
Perfect for ball demolishers
Size: Medium
The dogs love the chuck it brand. I don’t know what it’s made of but they go crazy over them. Will not play with another ball. Wonder if it’s “laced” with an addictive scent. Have pits. Very durable. Not able to chew to pieces. Last for about 6 months before there is a small break. I keep a back up because when the ball goes missing the house is in chaos. 😆 🤪
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 27, 2026
T
Verified Purchase
Tatiana
Waukegan, US
★★★★★ 5
Most durable ball!
Size: Medium
This are my dogs fav ball 😍 they last forever!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 23, 2026

recommand products