SKU: 62417303245

Happymodel X12 Frsky 5in1 AIO Flight Controller

Sale price$42.80 Regular price$47.56
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 13 - Jul 18

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Happymodel X12 Frsky 5in1 AIO Flight ControllerHappymodel X12 Frsky 5in1 AIO Flight Controller A Pilot's Dream Comes True Forget about the next level, with the Happymodel X12 Frsky 5in1 AIO Flight Controller, you're taking a warp speed journey to the Nth dimension of FPV flying! Why make do with basic, when you can have the world's first, sensational 5 in 1 AIO flight controller? That's right! With this little beauty, you've got an OPENVTX, 12A Brushless Blheli_S ESC and a Betaflight OSD, all in

Happymodel X12 Frsky 5in1 AIO Flight Controller - A Pilot's Dream Comes True

Forget about the next level, with the Happymodel X12 Frsky 5in1 AIO Flight Controller, you're taking a warp-speed journey to the Nth dimension of FPV flying! Why make do with basic, when you can have the world's first, sensational 5-in-1 AIO flight controller? That's right! With this little beauty, you've got an OPENVTX, 12A Brushless Blheli_S ESC and a Betaflight OSD, all in one slick package.

Can your current flight controller promise RX and VTX range that would leave superman feeling envious? We didn't think so! But the Happymodel X12 is not your average flight controller. It's an airborne magician in a silicon cloak, designed for brushless whoops, set to bewitch you with unbelievable RX and VTX range.

Key Product Highlights:

  1. Powerful Performance: This lightweight (5.1g), STM32F411CEU6 MCU backed marvel packs a punch with its 1-2S Lipo/LIHV battery support. It's essentially a Ferrari with wings!
  2. Sensational Sensor: Features a choice of MPU6000 or ICM20689 or BMI270 (SPI connection) sensor for a flawless, buttery smooth flight experience.
  3. Built-in Bonanza: A built-in 12A (each) Blheli_S 4in1 ESC, Betaflight OSD (SPI Control), 5.8G OpenVTX 0mw~400mw, ExpressLRS 2.4G, Frsky D8/D16, voltage meter sensor, and a current meter sensor. Talk about an all-you-can-fly buffet!
  4. Cutting-edge Compatibility: The onboard Frsky SPI D8/D16 receiver ensures sky-high compatibility, supporting D8 model channels for Non EU transmitters, with failsafe support.

So, FPV pilots, it's time to elevate your flying experience from "good enough" to "mind-blowingly awesome"! With the Happymodel X12 Frsky 5in1 AIO Flight Controller, the sky's not the limit - it's your playground. Let's paint the skies with the magic of next-gen flight control!

Specifications:
Brand Name: Happymodel
Item Name: X12 AIO 5-IN-1 Flight controller built-in 12A ESC and OPENVTX
Betaflight firmware target:
FRSKY Version:CRAZYBEEF4FR
VTX antenna: U.FL
Weight: 5.1g
Support 1-2S Lipo/LIHV battery
Size: 30mm*30mm*8mm

Flight controller X12 Frsky V2.1 flight controller built-in FRSKY 2.4G receiver Target: CRAZYBEEF4FR
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: ICM20689 or BMI270 or ICM42688P(SPI connection)
Mount hole size: 25.5mm*25.5mm
Power supply: 1-2S battery input (DC 2.9V-8.7V)
Built-in 12A(each) Blheli_S 4in1 ESC
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OpenVTX 0mw~400mw
Built-in ExpressLRS 2.4G,Frsky D8/D16, Flysky AFHDS-2A
Built-in voltage meter sensor , voltage meter scale 110Built-in current meter sensor , current meter scale 470
Onboard 4in1 ESC Power supply: 1-2S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: Z_H_30_REV16_7.HEX
Default protocol: DSHOT300
Support Bluejay firmware
When use Blujay firmware with 48khz, should set startup power to 1100/1200
Onboard Frsky SPI D8/D16 receiver Version SPI BUS receiver
CC2500 RF
Compatible Non EU transmitter D8 model Channels: 8ch
No ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support
Support Frsky D8/ D16 , Redpine , SFHSS
Onboard Flysky SPI AFHDS-2A receiver Version SPI BUS receiver
Protocol: AFHDS-2A
Channels: 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m
Failsafe support
Onboard 5.8g OPENVTX Firmware version: OPENVTX
Smartaudio v2.1
PIT Mode support
RCE Mode support
Channels:48ch
Transmitting Power: 0/RCE/25mw/100mw/400mw
Power supply: DC 5V
Current (5v): <650ma (400mw)
Antenna connector: U.FL

Specification

  • Brand Name: Happymodel
  • Item Name: X12 AIO 5-IN-1 Flight controller built-in 12A ESC and OPENVTX
  • Betaflight firmware target:
    • ELRS Version: CRAZYBEEF4SX1280
  • VTX antenna: U.FL
  • Weight: 5.1g
  • Support 1-2S Lipo/LIHV battery
  • Size: 30mm*30mm*8mm
Flight controller X12 ELRS V2.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU6000 or ICM20689 or BMI270(SPI connection)
Mount hole size: 25.5mm*25.5mm
Power supply: 1-2S battery input (DC 2.9V-8.7V)
Built-in 12A(each) Blheli_S 4in1 ESC
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OpenVTX 0mw~400mw
Built-in ExpressLRS 2.4G,Frsky D8/D16
Built-in voltage meter sensor , voltage meter scale 110Built-in current meter sensor , current meter scale 470
Onboard 4in1 ESC Power supply: 1-2S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: Z_H_30_REV16_7.HEX
Default protocol: DSHOT300
Support Bluejay firmware
When use Blujay firmware with 48khz, should set startup power to 1100/1200
Onboard SPI ExpressLRS 2.4GHz Receiver Packet Rate option: 50Hz/150Hz/250Hz/500Hz

ExpressLRS Firmware version: V2.0
RF Frequency: 2.4GHz
Antenna : SMD antenna
Telemetry output Power: <12dBm
Receiver protocol: SPI ExpressLRS
Compatible with ExpressLRS V2.0 TX Module
Couldn't flash separately ExpressLRS firmware

Onboard Frsky SPI D8/D16 receiver Version SPI BUS receiver
CC2500 RF
Compatible Non EU transmitter D8 model Channels: 8ch
No ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support
Support Frsky D8/ D16 , Redpine , SFHSS
Onboard 5.8g OPENVTX Firmware version: OPENVTX
Smartaudio v2.1
PIT Mode support
RCE Mode support
Channels:48ch
Transmitting Power: 0/RCE/25mw/100mw/400mw
Power supply: DC 5V
Current (5v): <650ma (400mw)
Antenna connector: U.FL

Included

  • 1 x Happymodel X12 Frsky AIO Flight Controller Board

Product Tags: FPV flight controller, Happymodel X12, Frsky 5in1 AIO Flight Controller, Frsky D8/D16 compatible, built-in Betaflight OSD, onboard Frsky receiver, built-in Blheli_S ESC, built-in OpenVTX.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 62417303245

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 1734 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
L
Verified Purchase
Lana T
Lexington, US
★★★★★ 5
Quite nice and very functional
Size: 7.7" x 7.7" x 1.7", Color: Grey (Metal Silvered), Size: 7.7" x 7.7" x 1.7", Color: Grey (Metal Silvered)
Elegant and substantial - this valet catch all for your night stand or dresser is quite nice and very sophisticated. Sleek and soft brushed suede like material. It was packed well, and is quite nice to keep miscellaneous items corralled together. I’m very pleased and would recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 15, 2025
C
Verified Purchase
Cali Mom
Draper, US
★★★★★ 5
Perfect size, high quality
Size: 7.7" x 7.7" x 1.7", Color: Black (Metal Silvered)
I had a previous catch all tray that I bought on amazon, it used buttons on the 4 corners to turn a flat cardboard into a tray. Over time, the catch all tray got filled up, not just with a wallet, keys and eyeglasses but eventually business cards and other knick knacks. With all the items inside the tray, sometimes the buttons would start to pop out. It wasn't awful, more of an annoyance. But it was time for me to find a more durable tray. I looked on amazon and added 6 different trays that had "potential" into my shopping cart. Then I carefully evaluated each one and deleted them out of my cart until there was only one left. Some had multiple compartments. Some were larger than this one. I felt the ones with compartments would limit my ability to put the things I want in there. Also, I didn't want it so big that it took up too much desk space. Ultimately, I felt this was the perfect size. I'm extremely happy with it, the quality is really nice and it looks and feels durable. No more loose buttons and spilled knick knacks.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 14, 2024
D
Verified Purchase
Denise
Port Orchard, US
★★★★★ 5
Keeps clutter away
Size: 7.7" x 7.7" x 1.7", Color: Black (Metal Silvered)
This works great to corral all my notes I write on post its or small notes. Keeping them hidden from the desk top b/c or the depth but still visible to me. Much better than keeping on the plotter. Looks great in quality .
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 25, 2025
M
Verified Purchase
MovieGuy
Waukegan, US
★★★★★ 5
Attractive, Simple, And Well-Made
Size: 7.7" x 7.7" x 1.7", Color: Orange (Metal Glided)
I use this as a "catchall". A place to stash things like my wallet and keys when I enter the door, so that I don't use them (I had been prone to that!). It serves it's purpose well. It's both sturdy and attractive, and a good size for a "catchall". Recommended for those like me who need such things.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 8, 2024
K
Verified Purchase
Kirstin Gramith
Los Angeles, US
★★★★★ 4
Good quality, orange color
Size: 7.7" x 7.7" x 1.7", Color: Orange (Metal Glided), Size: 7.7" x 7.7" x 1.7", Color: Orange (Metal Glided)
The quality is surprisingly good but the color is much more orange toned in person.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 17, 2024

recommand products