Bambu Lab PLA Glow Filament 1.75mm 1kg

Bambu Lab PLA Glow Filament 1.75mm 1kgPLA Glow stands out due to its incorporation of a unique additive: luminous powder. This variant retains the familiar qualities of traditional PLA, including easy printing, high quality, and exceptional overall mechanical properties. What sets PLA Glow apart is its distinctive feature it glows in the dark. This makes it the optimal selection for crafting luminous nameplates, logos, jewellery, and various models that require a captivating glow effect.

PLA Glow stands out due to its incorporation of a unique additive: luminous powder. This variant retains the familiar qualities of traditional PLA, including easy printing, high quality, and exceptional overall mechanical properties. What sets PLA Glow apart is its distinctive feature - it glows in the dark. This makes it the optimal selection for crafting luminous nameplates, logos, jewellery, and various models that require a captivating glow effect.

Unique Glow in Low Light Conditions

Bambu PLA Glow incorporates a distinct additive: luminous powder, which imparts a special property to printed objects, causing them to emit a captivating glow in the dark.

Accessory Compatibility

* A hardened nozzle is required when printing regularly.

* It is not recommended to print Bambu PLA Glow and other glow-in-the-dark PLA filaments with AMS Lite. These filaments, being hard and rough, may cause feeding failures due to substantial feeding resistance.

RFID for Intelligent Printing]

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Recommended Printing Settings

• Drying Settings before Printing - 55 °C，8 h
• Pringting and Keeping Container's Humidity - < 20% RH (Sealed, with Desiccant)
• Nozzle Temperature - 190 - 230 °
• Bed Tempreature (with PVP Glue) - 35 - 45 °C
• Printing Speed - < 300 mm/s

Physicial Properties

• Density - 1.24 g/cm³
• Vicar Softening Temperature - 57 °C
• Heat Deflection Temperature - 57 °C
• Melting Temperature - 160 °C
• Melt Index - 42.4 ± 3.5 g/10 min

Mechanical Properties

• Tensile Strength - 39 ± 2 MPa
• Breaking Elongation Rate - 12.2 ± 0.4 %
• Bending Modulus - 2750 ± 60 MPa
• Bending Strength - 76 ± 3 MPa
• Impact Strength - 26.6 ± 2.8 kJ/m²

Printing Tips

• For better print results, please reduce the Max Volumetric speed from 21 mm³/s to 15 mm³/s when printing PLA Basic Silver/Gold/Bronze.

Print Your Own Spool Now

Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the build-in files!

Instructions for Printed Spool

When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).

Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.

Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.

Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).

Step 2. Tear apart and pull out the plastic strips.

Included

• 1x Filament & Desiccant
• 1x Instructions & spool sticker
• 1x Filament Label

Browse more

• Browse Prusament Filament
• Browse ASA Filament
• Browse ABS Filament
• Browse Nylon Filament
• Browse PC Filament
• Browse PETG Filament
• Browse PLA Filaments (also PLA+)
• Browse PVA Filament
• Browse Silk Filament
• Browse SLA Resin
• Browse Speciality Filament
• Browse TPU Filament 
• Check out all our 3D Printing Supplies