SKU: 84957771837

Advanced Termites Bait Station - Outdoor

Sale price$89.10 Regular price$99.00
Save 10%

Pay in installments of $24.75 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 6 - Aug 11

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Advanced Termites Bait Station - OutdoorAdvanced Termite Monitoring Stations are placed in the ground ten to fifteen feet apart around the home and about two to three feet out from the foundation of the house. The Advanced Termite Monitor Station contains a wood food source for detecting subterranean termites. "ADVANCED TERMITES BAIT STATION IS PROVEN TESTED AS SHOWN IN PICTURE. WE INVENTED SPECIAL WOOD BAIT WITH SPECIAL X TERMITE ATTRACTANT. TO ENABLE LONG LASTING UNDER SOIL ESPECIALLY

 

Advanced Termite Monitoring Stations are placed in the ground ten to fifteen feet apart around the home and about two to three feet out from the foundation of the house. The Advanced Termite Monitor Station contains a wood food source for detecting subterranean termites.

 

 

"ADVANCED TERMITES BAIT STATION IS PROVEN TESTED AS SHOWN IN PICTURE. WE INVENTED SPECIAL WOOD BAIT WITH SPECIAL X-TERMITE ATTRACTANT. TO ENABLE LONG LASTING UNDER SOIL ESPECIALLY RAINING SEASON, OUR SOLUTION CAN OVERCOME IT EASILY BY X-TERMITE BAIT TECHNOLOGY. " 

How Advanced Termites Bait Station Works

Each Advanced Termites Bait Station comes loaded with 3 total components: The black plastic housing, a wooden Termite Monitoring Base,  and a black plastic cap. Stations are placed 10-15 feet apart, 2-4 feet away from the foundation around the structure to be treated to monitor subterranean termite activity. These stations do not contain any active ingredient  – they are for monitoring only. Termites Colony Elimination Powder (Fipronil 1%) may be purchased separately from our store (FREE FOR ANY PURCHASE OF ADVANCE TERMITE BAIT STATION) 

The easy-access design of the station combined with highly attractive wooden base attract and intercept foraging worker termites before they find food in the structure. If activity is observed in stations, the Termites Colony Elimination Powder (Fipronil 1%) need to pour into attractive wooden base and it required 7-15 days to eliminate the termite colonies. 

Package Includes:

a) High Grade Bait Station (180mm x210mm x 110mm)  - 1 unit

b) Wood Bait made by tree species favored by termites - 2 units 

c) 80g Fipronil Powder - 1 unit 

d) Free Gift : SJ Termite Control Cartridge 1 unit  (to attract termites and eliminating the colony) 

Figure : SJ Termite Control Cartridge 85g 

Target Pests

Subterranean termites

Target Uses

Advanced Termite Bait Stations are installed to monitor and treat subterranean termites around structures, generally in residential areas. Advanced stations are easy to install, monitor, and maintain, with minimal disturbance to the environment.

ACTIVE INGREDIENT: No active insecticides, contains only wood and food attractants.

Application Instructions

Always read the product label completely before use.

  1. Install Advanced Bait Stations (including the wood base and termite monitoring cartridge) into the ground every 10-20 feet around the perimeter of the structure. Stations should be placed 2-4 feet away from the foundation, but not directly under the drip line from the roof of the structure. To dig holes for the stations, use a 2 ¾ in. hand or electric auger or post hole digger. The cavity for each station should extend 2 to 4 in. below the stations’ housing to allow excess moisture to drain.
  2. Monitor stations every 2-4weeks for termite activity
  3. If termite activity is present, pour the termites colony elimination powder (Fipronil 1%) into wooden base.
  4. Inspect active bait stations every 2-4 weeks to see if termite activity has stopped. When activity stops, replace the wooden base. Repeat process as needed.
  5. Replace the wood bases for best results. Wood that is soggy or moldy should be replaced as soon as possible.

Standard Application Rates:

*Place stations 10-20 feet apart, 2-4 feet from the foundation of the structure – Closer placement results in better monitoring and treatment.

*2 wooden bases/wood bait are included per station and should be replaced approx. every 12 months.

For use in the following areas:

Advance Termite Bait Stations are for outdoor use only.

**See above for Application Instructions. Install in grassy or landscaped areas. For concrete or asphalt applications, creation of a cavity in the concrete or asphalt is considered to be the station housing the components, and the station itself is not needed.

Advanced Termites Bait Station Features

*Low profile remains flat to soil surface.

*Easy installation

*Designed for quick transfer from wooden termite monitoring base to bait station, resulting in minimal disturbance of termite feeding activity.

*Specially formulated bait in rectangular shape,which is milled from tree species favored by termites.

*Large bait load eliminates even the largest colonies.

*Maximum wood-to-soil contact

*Minimum disturbance to soil and termite activity

*Easy-access wood slots allow ready termite entry.

*Quick-lock station cap simplifies opening and closing the station.

Extra Tips

*Monitor stations at least every 90 days after installation.

*Replace Wood at least every 12 months, or more frequently if wood base becomes soggy or moldy (white or gray mold).

*Bait systems are for preventative treatments and should not be relied on to treat termites already in the home.

*Place stations 2 to 4 feet from the foundation, but do not place under the drip line of the roof.

 

 

PRODUCT SELECTION TABLE

  TERMITE DIY BOX  Termites Powder Fipronil  Termites Gel  Termites Control Liquid 100ml Termites Control Liquid 500ml Advanced Bait Station 
Termite Infection  Minor infection, 1 roadway (width <1mm) Moderate Infection  Moderate Infection  Moderate to Serious Infection  Moderate to Serious Infection  Serious Infection/Protection 
Location  Indoor Outdoor and Indoor  Plaster Ceiling and Wall  Indoor and Outdoor - All spots  Indoor and Outdoor - All spots Outdoor 
Treatment Period 1 months  1 week  1-2 weeks  1 week 1 week  1 month
Strength Easy to use and apply in indoor. Safe Easy to apply on mud/roadway Best for wall and sticky Easy and high effectiveness Easy and high effectiveness Easy and high effectiveness
Weakness  Longer treatment period  Not suitable for plaster ceilling  Need to squeeze into roadway NA NA For outdoor only

 

 How it works? 

 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 84957771837

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 30 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
Amazon Customer
Houston, US
★★★★★ 5
Excellent product for the price.
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
I have had many, many printers over the many years at the business and for home. I honestly think this is the best value for what I need. The eco tank is fabulous. This is the first printer I have purchased with the ecotank. So much better than the cartridges. The quality is good and it was easy to setup and put on the network. I did wait a few months before writing this review to truly test it out and write a fair review. I am pleased. I have had Epson products in the past and do appreciate their quality and affordability.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 4, 2026
R
Verified Purchase
Robert O. Forsyth Jr.
Charlottesville, US
★★★★★ 1
JUNK, Cheaply built, Feed Scanner fails and falls apart in less than 5 months and only 4 uses.
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
Absolute piece of Junk! Built cheaply. Feed Scanner has never worked properly from my first scan (only did 4) and now falls apart completely, in the roller section. It falls out after it jammed for the 7th time today, this time with a SINGLE piece of paper. If you have a piece of paper that has a fold in it, forget about it. That will never feed through. I had 6 sheets I had to get out today, I had to do manually via the flat bed, both sides. It took 23 minutes to get done. Should not have taken 2. The last time I used it same issues but less sheets. The paper is SO TIGHT in the feed section it is hitting BOTH walls. You could not slip a piece of paper in there if you wanted too, most likely one of the reasons it does not feed correctly. While on the phone with support (I am right now, 4th call today and 3 emails of pictures they wanted later, the hoops they put you through is ridiculous!) Of course overseas support and has little to no knowledge of being Tech support, I asked for supervisors only to have my first call disconnect at 1 hour and 20 seconds. Then the next call was 24 minutes, then another 32 minutes and now this one still ongoing (56 minutes and still going). Now after 3 hours and 5 minutes, they are "holding" my credit card for 179.99 + tax to get a REFURB unit! So much for a 5 year Warranty. Oh they acted like it was out of date on Warranty, it has NOT been in EXISTENCE for 5 years , it came out in 2022. Did I fail to mention you WILL be dealing with Overseas people who have you repeat the same thing over and over and over and over again. They wonder why I was getting upset...hmmmm . As they pass you along the ranks you have to repeat EVERYTHING all over again. As I was on the phone and they were asking me to open WRONG doors to find the serial #, I lifted once again the Jam area and guess what, the parts fell out. Just PLOP! Other issues while I am at it, the Picture quality is "OK" nothing special. I bought it to save ink as HP gouges you to death and destroys your print head if you use a knockoff. The Ink has been "OK", but I haven't really had it long enough to tell as most everything has been Black and White, so all are still full except the Black (3.4's). Its a rear feed, I miss the HP draw on that, the print speed again is not fast, just OK. Though never really in a rush with it. I cant say it enough, this is cheaply built, and my experience with Tech Support was a HORRIFIC. I never like dealing with Over seas support as it is, but what they wanted pictures of as proof was mind blowing (pictures of the tubes that go to the ink wells? What does that have to do with the issue at hand.) The panel function is anything but user friendly. Firmware Updates, if not done, will prevent usage until done. You have to download and install ALMOST 30 different files, from drivers to firmware updates the list is endless. Never have I had to do that many of ALL printers I have had combined. Simple ZIP file and let it run on an executable file (EXE)like everyone else. That will take you over 2 hours to get all loaded. The ink wasn't bad seeing it needs to be primed first to work, I am not sure what will happen when the REFURB comes, will I get ink or just have to re-prime from the cartridges. The software for scanning is easy to use, though unnecessary, should just scan and auto save, or am I just spoiled by HP? But to send me a "REFURB" as a replacement on a 5 month old unit with a 5 year warranty is really being low. They did EVERYTHING they could to get me to NOT follow through in this return, you have ONLY 30 days on Amazon. You have been warned, I would look elsewhere, the tank issue is a great Idea, but if it doesn't work, what good does it do.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 8, 2025
M
Verified Purchase
Michael A. Adkins
Dallas, US
★★★★★ 5
First Impressions - Complete Review
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
Printer Review from an Artist. Printer cost with a 3-year extended warranty - $199.00. Came with four full bottles of Ink. Each bottle was huge, and enough to completely fill up the tanks. In my old Epson printer that used Epson 127 Ink Cartridges a cartridge held 8ml of ink. The cost per cartridge for the XL Black was $31.00 on Amazon. In comparison, a bottle of ink for the tank printer costs $15.00 and holds 65ml. The Epson 127 Ink Cartridge is rated at 175 pages for the XL cartridge and the Tank Printer is rated at 4500 pages per bottle of ink. So, the difference in cost is striking. Unboxing the printer was simple enough. The printer weighs about half the weight of my old Epson printer. The new printer does not have printer drawers but, back feed only. This actually worked out well for me since I was constantly taking the paper in out and out of the drawers when changing paper size. Also, with this direct paper feed, I figure it will handle my heavier weight card stock paper that I use for my art and greeting cards. To my great surprise, the printer offers two-sided printing. This is really handy when printing my Zines. The printer setup was extremely easy as they recommend a phone app, that walks you through each step with pictures. And it communicated perfectly with the phone for the setup. It takes about 15 minutes to completely set up the printer. I have learned to not rush setup. Take your time, and follow the instructions step by step, Which include filling the tanks. Features, * The printer dues Dual-Sided Print - Great for zines. * It has fax capability, but we do not have a landline, so that will not be used. * It does copying, with a document feeder or you can lift the feeder and place the document on the glass. * I mostly use my Epson Precision San copier but it is nice if you wish to make a quick copy of a document. * Some reviews complained about the very small LED display but I find that by using the app or computer I can control all that I need to do. Print Alignment. I did this test but the printer heads did not require any alignment. During the setup process, the program installs the printer driver on my computer. However I found it to be the very basic driver, and I went to the Epson Website and downloaded and installed the latest driver which is very robust and has all the settings that I needed. The printer's footprint is smaller than my old printer. And my old printer had two paper drawers, though I never used the second drawer. Negatives. The output tray is flimsy and seems like it would easily break if bumped when I walked past the printer, so I have to be careful about this. So far I do not see a way of checking the ink levels from the computer. And they said in the instructions to be sure to check your ink levels. You can see on the front of the printer, where you can see the ink levels. When you purchase more ink, you can attach the bottle and it will not overfill the tanks, and you can then use more ink from the bottle later. So I will purchase a complete set of ink and keep it and as it runs low with about 1/4 left in the tank, I will just fill it up. So far I am very happy with the investment and now printing and ink cost is not a major factor. And I figure I will do a lot of printing with this printer when the holiday season rolls around for my greeting cards. As for print quality, I will need to report on this later, though there were no negative reviews of print quality. A test print on regular paper and the colors seemed to be spot on. One note, I still will continue to use my Canon Pro-300 Wide Printer for my Fine Art Prints, but the new Tank Printer will be my studio workhorse.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 11, 2024
E
Verified Purchase
Edisson Salazar
Grantham, US
★★★★★ 4
Frustrating to set up and unreliable
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
I bought the Epson EcoTank ET-4800 hoping for an easy, low-cost printing solution, but it has been nothing but trouble. The wireless setup is overly complicated, and the printer often loses connection to the network, forcing me to restart it or reinstall the software. Printing is slow, even for simple documents, and the paper feeder sometimes pulls multiple sheets at once. While the EcoTank system is supposed to save money on ink, the print quality is inconsistent — colors can be dull, and black text occasionally appears streaky. Scanning and copying are also sluggish. For the price, I expected something much more reliable.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2025
I
Verified Purchase
Irving M. Lamansky
Alexandria, US
★★★★★ 5
ET-4800 EZ PZ set up and start up. Prints and scans just fine
Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan, Style: ET-4800, Color: White, Set: FAX/ADF/Print/Copy/Scan
An excellent home printer. And why did I purchase such? I had an Epson WF-520 for nearly ten years. But neglect and lack of use caused the printer head to get gunked up. I cleaned the print heads using a solution of 95% Etoh and glass cleaner (about fifty/fifty), a syringe with a plastic tube attached and LOTS of paper towel strips. It was moderately successful but I was never able to get it back to like new printing. I looked over several new printers and wanted to stay with Epson because of ease of use (copy, scanning, printing). Seems as tank printers are the way to go these days. So I ordered the ET-4800. Got here in only a couple of days. Setup was pretty easy, just follow the instructions either via the documentation included or online version. I have pinted and scanned a color test page. I used the built in SmartScan feature without having to think about it much. I am quite satisfied with the results. By the way, there is no automatic two side printing. You actually have to get off your b---, take out the first printing, turn it over and refeed the stack. I was used to doing that with the old WF-520 and never had a problem. I will now set up a once a week, automatic scheduled printing task. I will just have to make sure there is paper on hand. Lack of use is the killer of these inkjet machines regardless of manufacturer.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 16, 2026

recommand products