Pay in installments of $11.83 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 17 - Jul 22
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
SpeedyBee F405 V3 BLS 50A 4in1 Flight StackFeatures Fully featured flight stack that is great value for money Built in Bluetooth module for wireless FC and ESC configuration 50A Blheli_S ESC Supports 8x motors SD card support (up to 4GB) 4x LED strip connection pads DJI Air unit compatible (plug and play) 4x UARTs 5V 2A, and 9V 2A BEC's Integrated Baro Specifications F405 FC Specifications Product Name: SpeedyBee F405 V3 Flight Controller MCU: STM32F405 IMU(Gyro): BMI270 USB Port Type: Type C
Features
- Fully featured flight stack that is great value for money
- Built in Bluetooth module for wireless FC and ESC configuration
- 50A Blheli_S ESC
- Supports 8x motors
- SD card support (up to 4GB)
- 4x LED strip connection pads
- DJI Air unit compatible (plug and play)
- 4x UARTs
- 5V 2A, and 9V 2A BEC's
- Integrated Baro
Specifications
F405 FC Specifications
- Product Name: SpeedyBee F405 V3 Flight Controller
- MCU: STM32F405
- IMU(Gyro): BMI270
- USB Port Type: Type-C
- Barometer: BMP280
- OSD Chip: AT7456E chip
- BLE Bluetooth Supported. Used for Flight Controller configuration
- DJI Air Unit Connection Way: Two ways supported: 6-pin connector or direct soldering.
- Blackbox MicroSD Card Slot
- BetaFlight Camera Control Pad
- Current Sensor Input: Supported.
- Power Input: 3S - 6S Lipo
- 5V Output: The total current load is 2A.
- 9V Output: The total current load is 2A.
- 3.3V Output: Up to 500mA current load.
- 4.5V Output: Up to 1A current load.
- ESC Signal : M1 - M4 on bottom side and M5-M8 on front side.
- UARTS: 5 sets(UART1, UART2, UART3, UART4(For ESC Telemetry), UART6)
- ESC Telemetry: UART
- I2C: Supported
- Buzzer: Supported
- RSSI Input: Supported
- SmartPort: Supported
- Mounting: 30.5 x 30.5mm( 4mm hole diameter)
- Dimension: 41.6(L) x 39.4(W) x 7.8(H)mm
- Weight: 9.6g
50A ESC Specifications
- Firmware: BLHeli_S JH50
- Wireless Configuration: Full Configuration Supported in the SpeedyBee app
- Continuous Current: 50A * 4
- Burst Current: 55A(5S)
- TVS Protective diode Yes
- External Capacitor: 1500uF Low ESR Capacitor(In the package)
- ESC Protocol: DSHOT300/600
- Power Input: 3-6S LiPo
- Power Output: VBAT
- Current Sensor: Support (Scale=386 Offset=0)
- Mounting: 30.5 x 30.5mm( 4mm hole diameter)
- Dimension: 45.6(L) * 44(W) * 6.1mm(H)
- Weight: 13.8g
Includes
- 1x SpeedyBee F405 V3 BLS 50A Flight Stack (includes FC and ESC and connection cables)
- 1x Accessories Pack
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 18 reviews
Sort
Product Reviews
★★★★★ 5
Absolutely blown away!
I got this 5-in-1 cigar cutter set to try out, and right away I was impressed by how versatile it is. The built-in V-cutter and punch both cut clean and precise — whether I went with a deep V or a quick punch, the draw came out smooth every time. The flat cutter and draw-enhancer add even more flexibility, especially when dealing with a tighter cigar. The tool feels solid in the hand with good weight, and the carbon-fiber design gives it a classy look without being flashy or over the top.
Where this set really shines is convenience and portability. It’s compact enough to carry anywhere, yet gives you everything you need — cut, punch, tweak the draw, or even hold the cigar without juggling multiple accessories. For casual smoking, travel, or keeping it in the car for last-minute sessions, it’s the perfect all-in-one tool. For the price and everything it packs in, it’s a practical, stylish, and reliable addition to any cigar lover’s kit.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 2, 2025
★★★★★ 5
A Stunning and Flawless All-in-One Tool
I'm a casual cigar smoker, and I was getting tired of juggling a separate guillotine cutter and a punch. I wanted one solid, all-in-one tool that could do everything and look good doing it.
Honestly, when I took this out of the box, I was blown away. The first thing you notice is the weight and how solid it feels in your hand, definitely not a cheap, flimsy tool. It’s incredible how sleek it looks; the design reminds me of one of those fancy minimalist metal wallets. It just has a really premium, high-end feel.
But the real magic is in how many features it has. You get a perfect guillotine cut, a sharp V-cut, and a punch, all in one compact device. It even has a little poker tool that slides out, which is a lifesaver for a tightly packed cigar. It’s everything you need, all in one place.
And the best part is just how well it works. I was worried that a multi-tool might compromise on quality, but that's not the case here. The blades were sharp! Every cut I've made, whether it's the straight cut or the V-cut, has been incredibly clean and precise. The spring action is smooth, and the whole thing just operates flawlessly.
Overall, this cutter completely exceeded my expectations. It's a beautifully designed, incredibly versatile, and highly effective tool that feels like it should cost way more than it does. It's the perfect single accessory for any cigar smoker and would make an amazing gift. Five stars, hands down.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 24, 2025
★★★★★ 5
A Must-Have Tool for Every Cigar Enthusiast
As someone who enjoys a good cigar, I was thrilled to try out the DXXULL 5-in-1 Cigar Cutter Set, and it did not disappoint. This tool is incredibly versatile, offering everything I need in one compact design. The built-in cigar V cutter, flat cutter, and punch are all super sharp and make cutting my cigars a breeze. Switching between the different functions is seamless, and I love how sturdy and well-made it feels in my hand.
One of the standout features for me is the cigar draw enhancer. It’s a game-changer for those times when a cigar is rolled a bit too tight. This tool makes sure every draw is smooth and enjoyable. The ergonomic design is another plus, as it fits comfortably in my hand without any awkwardness, and I appreciate the added convenience of having a cigar holder included. It's like the Swiss army knife of cigar tools!
Overall, this set has become an essential part of my cigar experience. It’s perfect for both casual smokers and serious aficionados alike. I’ve already recommended it to a few friends, and they’ve been just as impressed. If you’re looking for a reliable and multifunctional cigar accessory, this is definitely worth considering.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2025
★★★★★ 5
Quality, Durable & Looks Exquisite
This cigar cutter is truly stunning; it's more than just a tool, it's a statement piece. Crafted from high-quality, durable, and wear-resistant zinc alloy, it possesses a satisfying weight that feels substantial yet never cumbersome in your hand. What sets this cutter apart is its impressive versatility. Not only does it comfortably hold a cigar in place, but it also offers a comprehensive selection of cutting methods, including a precise V-cut, a clean straight cut, and a handy punch, catering to every preference. The inclusion of a draw enhancer is a particularly thoughtful and appreciated feature, ensuring an optimal smoking experience every time. Furthermore, the smooth, spring-loaded mechanism guarantees effortless, clean cuts with minimal effort. Considering its exceptional design, functionality, and build quality, this cigar cutter makes an outstanding gift for any cigar enthusiast, and the price point makes it an incredible value.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 7, 2025
★★★★★ 5
Compact Comfort for Extended Typing - Keyboard Wrist Rest Pad Delivers!
Size: 100% Standard, Size: 100% Standard
My recent purchase of a keyboard wrist rest pad has significantly improved my typing experience, and I couldn't be more satisfied with its ergonomic design and practical features.
This wrist rest pad strikes the perfect balance between comfort and compactness. Its ergonomic design provides excellent support, reducing strain during extended typing sessions. The padding is just right, offering a comfortable resting place for wrists without feeling overly soft or bulky.
One of the standout features for me is the compact size of the pad. It fits perfectly in front of my keyboard without taking up excessive space on my desk. This design consideration is fantastic for those who want ergonomic support without sacrificing valuable workspace.
Cleaning is a breeze with this wrist rest pad. The material used is not only comfortable but also easy to wipe clean. It's a practical addition that ensures a hygienic and well-maintained workspace.
Whether you're a professional who spends hours typing or a casual user looking for added comfort, this wrist rest pad is a game-changer. Its compact size, ergonomic design, and easy-to-clean features make it a standout accessory that I highly recommend. Say goodbye to wrist fatigue and hello to a more comfortable and efficient typing experience!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 25, 2023