SKU: 84235165321

GYS 032248 EASYMIG 150 lasapparaat, 230 V

$483.75 $537.50
Save 10%
No.2 Bestseller on martinetexier.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 14 - Jul 19

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

GYS 032248 EASYMIG 150 lasapparaat, 230 VDe EASYMIG 150 is een semi automatisch lasapparaat. Met het apparaat kan MIG MAG, met gevuld draad en MMA gelast worden. Dankzij het intutieve bedieningspaneel kunt u de lasstroom en de draadsnellheid makkelijk instellen. Het apparaat is licht en eenvoudig te transporteren. De EASYMIG 150 wordt aanbevolen voor het lassen van staal, rvs en aluminium. 3 in 1: MIG MAG GAS MIG MAG NO GAS MMA De Inverter technologie garandeert een optimale lasstroom

  • De EASYMIG 150 is een semi-automatisch lasapparaat. Met het apparaat kan MIG/MAG, met gevuld draad en MMA gelast worden. Dankzij het intuïtieve bedieningspaneel kunt u de lasstroom en de draadsnellheid makkelijk instellen. Het apparaat is licht en eenvoudig te transporteren. De EASYMIG 150 wordt aanbevolen voor het lassen van staal, rvs en aluminium.
  • 3 in 1: - MIG/MAG GAS - MIG/MAG NO GAS - MMA
  • De Inverter technologie garandeert een optimale lasstroom-kwaliteit en een laag energieverbruik.
  • Kan rutiel elektroden lassen. Antisticking functie (voorkomt dat de elektrode plakt bij het starten).
  • Maakt mogelijk :- procedure MIG/MAG, massief draad met gas - procedure NO GAZ, gevuld draad zonder gas.
  • Deze procedure maakt het mogelijk : Te lassen met gevuld draad dankzij ompoling. Onafhankelijk van omgevingsinvloeden (tocht,...) te werken. Mobieler te werken, dankzij de afwezigheid van grote gasflessen. Ideaal voor buitenwerkzaamheden op fijn plaatwerk.

Productinformatie:

De Easymig 150 is een eenfasige lasinverter die MIG/MAG-, vuldraad- en E-handlassen kan en is geschikt voor staal, roestvrij staal en aluminium. Door de robuuste en versterkte constructie, het lage gewicht en de rubberen demper die schokken en trillingen verminderen, is het apparaat ook geschikt voor mobiel gebruik. Een intuïtief bedieningspaneel vergemakkelijkt de instelling van de draadspanning en -snelheid. Er hoeven alleen de volgende instellingen te worden geselecteerd: - vooraf ingestelde spanning van 15 tot 20 V of de elektdooddiameter bij het E-handlassen - selectie van de draadsnelheid van 3 tot 9 m/min. Het apparaat is voorzien van een Eurocentrale aansluiting voor een eenvoudige vervanging van de brander.

Onze Easymig-serie is op elk toepassingsgebied afgestemd:

H E I M W E R K E R: Ideaal voor doe-het-zelfactiviteiten en bij eenvoudige reparaties.

L A N D W I R T S C H A FT: Geschikt voor de reparatie van landbouwmachines en apparaten.

W A R T U N G: Perfect geschikt voor licht onderhoud in de werkplaats

K U N S T H A N D W E R K: Voldoet aan de eisen voor handwerk door eenvoudige bediening en bedienbaarheid.

Eigenschappen:

De inverter-technologie zorgt voor een uitstekende lasstroom bij een lager stroomverbruik. Kan rutiel omhulde elektroden lassen (Ø 1,6 - Ø 3,2 mm) Antisticking: optimaliseert de elektrodengeleiding. Kan het volgende lassen: - MIG/MAG-lassen met massieve draad met gas - Vuldraad lassen zonder gas. Het vuldraadlassen maakt het mogelijk om met behulp van het omgekeerde polariteit systeem met vuldraad te lassen. Wit - bestand tegen buiteninvloeden (wind, ...) te zijn - lichter en mobieler te zijn, omdat er geen gasfles nodig is - optimaal voor buitenwerkzaamheden op dunne platen te zijn

Eenvoudig in te stellen

Selectie van de draadsnelheid 3 tot 10 m/min (MIG/MAG) of vereenvoudigde stroominstelling met betrekking tot de elektrodendiameter (MMA), selectie van de lasspanning van 15 tot 21 V (MIG/MAG), 2 gekleurde leds voor visualisatie: thermische bescherming aan/uit • stroomvoorziening aan

Inhoud levering:

• MIG/MAG-lasinverter EASYMIG 150

• MIG-brander voor staal, 150 A met 2,2 m lengte

• Massaklem met kabel (1,6 m, 16 mm²)

• Elektrodenhouder met kabel (1,6 m, 10 mm²)

• Accessoires: Contactbuis 0,9 mm, "gas" mondstuk voor vuldraadlassen, contactbuismoersleutel, gasbuis 1 m, 2 slangklemmen voor de gasbuis

EASYMIG 110
EASYMIG 130
EASYMIG 140
EASYMIG 150
EASYMIG 160
Koopopties
Klantenrecensies
3,0 van 5 sterren 1
5,0 van 5 sterren 4
3,8 van 5 sterren 4
3,5 van 5 sterren 22
4,0 van 5 sterren 22
Prijs — no data € 554,16 € 482,90 € 511,90 € 479,76
Netaansluiting 230 V - 50/60 Hz - eenfasig 230 V - 50/60 Hz - eenfasig 230 V - 50/60 Hz - eenfasig 230 V - 50/60 Hz - eenfasig 230 V - 50/60 Hz - eenfasig
Netbeveiliging 16 A 16 A 16 A 16 A 16 A
Lasbereik MIG/MAG 30 - 100 A 30 - 120 A 30 - 140 A 30 - 140 A 30 - 160 A
Lasbereik MMA 20 - 80 A 20 - 100 A 20 - 120 A 20 - 120 A 20 - 140 A
Inschakeltijd (40 °C) (MIG) 60% @ 60 A - (MMA) 60% @ 50 A (MIG) 60% @ 70 A - (MMA) 60% @ 60 A (MIG) 60% @ 80 A - (MMA) 60% @ 70 A (MIG) 60% @ 80 A - (MMA) 60% @ 70 A (MIG) 60% @ 95A - (MMA) 60% @ 90A
Nullastspanning 62 V 62 V 62 V 62 V 59 V
Lasdraadgeleiding 2 rollen 2 rollen 2 rollen 2 rollen 2 rollen
lasdraad Ø 0,6 – 0,8 mm (veiligheidsgas), Ø 0,9 mm (vuldraad) Ø 0,6 – 0,8 mm (veiligheidsgas), Ø 0,9 mm (vuldraad) Ø 0,6 – 0,8 mm (veiligheidsgas), Ø 0,9 mm (vuldraad) Ø 0,6 – 0,8 mm (veiligheidsgas), Ø 0,9 mm (vuldraad) Ø 0,6 – 0,8 mm (veiligheidsgas), Ø 0,9 mm (vuldraad)
elektrode Ø 1,6 - 2,5 mm Ø 1,6 - 3,2 mm Ø 1,6 - 3,2 mm Ø 1,6 - 3,2 mm Ø 1,6 - 3,2 mm
Draadrollen Ø 100 mm Ø 100 mm Ø 100 mm Ø 100/200 mm Ø 100/200 mm
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 84235165321

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 188 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Chief
Natrona Heights, US
★★★★★ 5
One of the best genral-purpose frothers out there, period
For the longest time, I've been looking for what seems like a unicorn -- something about the size of a mini-frother, but stronger than most. Almost a mini-submersion blender, really. And I still haven't found it. But the Maestri House frothers are about the closest thing I have found, which gives me hope that my unicorn might really exist someday. Unlike cheaper frothers that almost always warn you off from actually washing them, Maestri House makes theirs waterproof. Seriously, you can froth sloppy and get it all up in the whisk end of this, then rinse the whole thing under the faucet if you want to. I really don't recommend that for the speed ring at the top of this one, as a precaution and because it should never be necessary, but you can if you have to. Despite what I believe is cheaping out on the battery at just 1200mAh, it really can last a while, especially if you use it just once or twice a day. That it recharges using a USB-C connector is definitely a bonus. The speed ring at the top is great feature, overall. It turns on at a slow speed and lets you crank it all the way up to a speed that I still haven't found a good use for. This provides a lot of flexibility, from gentle mixing to full-on danger frothing. The included whisks can all be pretty handy. The whisk-whisk is good for things like two or three whole eggs, and the frother-whisk is good for general-purpose frothing. I really haven't figured out what the hook-whisk is for, because this isn't really made for handling any kind of dough, but it might work well for medium-to-thin batters. Generally speaking, I can easily recommend Maestri House frothers over just about any other handheld frother you're going to find. For completeness, though, there are a few things that I think could be improved upon: - The battery. Once you're into the $25+ range, I would expect a a high-current 2000mAh battery, for longevity and torque. - The speed ring is flexible, but depending on your dexterity and grip it can be tricky to operate when dialing in just the right speed, with just one hand. And there's no "Off" button, so you have to wind it down to "Off". For some reason I often end up spinning it the other way and making it go faster instead. Muscle memory should take over eventually, but still. A dedicated On/Off button would be handy. - For as beefy as this device feels, it doesn't handle thick liquids as well as I expected. The torque for basic mixing and frothing tasks is more than enough, but get this into thicker liquids or even four+ eggs, and it starts to bog down. - Like most frothers of this type, the balance of the whisks is a variable thing. If a whisk shaft gets even a little bent this thing will shake, at least when started at slow speed. Things usually settle out at higher speeds, but I'd really like to see the shaft of the whisks made thicker and more rigid so they don't bend so easily. - The frother whisk is good for what it is, and will quickly make great, basic foam. But unless you have supreme technique, it probably won't be good for any kind of latte art. This isn't a big problem in my mind, just something to be aware of. - The stand is okay at best, and unstable at worst. It's just a bit short for some whisks, so some of them can bottom out on the counter and make it unstable. Bending the holder at the top back just a bit with some good pliers, so the whisks are tilted up and away from the bottom, can help. I'll probably end up designing a 3D printed stand to hold this more security, as well as store the extra whisks. - I'm really not a fan of the textured finish on this model. It feels good enough, and the color is okay, but there are obvious seams on each side that, in my opinion, take away from the aesthetic. My call would be that whatever finish might be on the body, it should be seamless around the entire cylinder. I want to be clear, that none of the comments above are intended to warn you off of this if you're looking for a very good, well made frother. I doubt that you can find anything better! I only mention them because nothing is perfect, and to temper the reader's expectations. This brand, if not this specific model of frother, is almost certainly everything that you are looking for. If there's anything you don't like about this particular model on paper, I urge you to consider literally any other handheld frother they make. It only falls short compared to my unicorn device, something I don't ever expect to see from anyone else, but really believe that Maestri House could deliver if they think there's a market.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 12, 2026
G
Gadget Reviewer
Waukegan, US
★★★★★ 4
It is an upgrade from PRODUKT
There's a lot to like with this frother. First off, it gets super-fast. It has good power but struggles a bit through thicker liquids at high speeds. I really got it exclusively for frothing milk and making really smooth chocolate milk. For those things it works well. I like the stand. I just keep a napkin under it so it will drip dry after rinsing. It is easy to clean because you can just run it on about medium under running water. I've been using it for about 3 weeks now, probably once every other day, and I'm still on the first charge. To me that is excellent battery life. It spins true, even at high speed. The key is to treat it well and probably make sure to use the stand instead of laying it on the counter. Because of the high RPM, any imbalance or bend at all is really going to be exaggerated. The only thing I am not crazy about is the control. I don't like that I have to twist it off while in the liquid. I wish there was just a switch along with the adjustment ring.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 28, 2026
Q
Verified Purchase
Quotes&More
Carnegie, US
★★★★★ 5
Terrific device. Fun to use.
Color: Black
Outstanding. Works incredibly well. And I have now also learned that skim milk makes far better foam than mild with even 1% fat (foam comes from protein and fat inhibits). Anyway, this device is well made, easy to use, two soeeks are great, battery lasts ,one time between charges. Really pleased.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 12, 2026
M
Verified Purchase
Megan
Boise, US
★★★★★ 5
Best frother ever!
Color: Black
I’ve had this frother for over a year now and it’s by far the best I’ve ever had. I purchased others in the past and they would not hold charge or end up not working after a while, but this one holds a charge forever and has lasted well over a year. It’s easy to use and powerful. Highly recommend!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
L
Verified Purchase
Longhorn Fan@@@@@
Chelsea, US
★★★★★ 5
Best choice!
Color: Blue, Color: Blue
This is the best of the best!!! Very sturdy, reliable, cleans easily I love it! Had others and this one beats them all!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2026

recommand products

Dubbelzijdige geëlektroplateerde glazen magnetische telefoonhoes
19.99
HiKOKI WR36DB W2Z ACCU MOERAANZETTER 1/2 36V
150.34
Makita PBS: SDS-PLUS 18X460X400MM
15.19
Makita PBS: SDS-PLUS 26X460X400MM
33.38
Makita PBS: SDS-PLUS 16X260X200MM
13.00