SMALL Fender Steps/Brackets Single Axle and Tandem Axle Trailers Profile Cut

SMALL Fender Steps/Brackets Single Axle and Tandem Axle Trailers Profile CutFender Steps Brackets Lot of 4 Made from 14 Gauge Mild Steel For use with single axle and tandem axle trailers, profile cut and formed to fender radius. Mounting holes pre drilled, will suit 7. 5", 9", 10", 11", 12" and 13" wide fenders. Note: Two outer edges are not welded to allow for final fitting. Brackets are 11" (279 mm) wide and need to be trimmed to suit your fender. This width will also allow brackets to be welded to trailer side and allow

Fender Steps/Brackets Lot of 4 Made from 14 Gauge Mild Steel

For use with single axle and tandem axle trailers, profile cut and formed to fender radius. Mounting holes pre drilled, will suit 7.5", 9", 10", 11", 12" and 13" wide fenders.

Note: Two outer edges are not welded to allow for final fitting.

Brackets are 11" (279 mm) wide and need to be trimmed to suit your fender. This width will also allow brackets to be welded to trailer side and allow for double radius fenders to be bolted directly above tire. Good for example a boat trailer, frame is much more narrow than where fenders are normally to be mounted.

Part Numbers: FSSRFLR / FSSLFRR

Width 11" (279.4 mm)
Length 3 3/8" (85.7 mm)
Height 2 1/2" (63.5 mm)
Gauge 14
Weight 1.15 kg

Listing is for 2 x FSSRFLR and 2 x FSSLFRR

Please contact James at 02 6024 3539 or 0407 011 148 for shipping options or for any questions.

We are using TNT Express.