Melbourne Tool Company Large Router Plane Blade Set of 10

Melbourne Tool Company Large Router Plane Blade Set of 1050 degree straight blades The MTC Large Router Plane is a unique router plane. Unlike many other router planes, the blade is made from a straight square section of HSS steel set bevel down in the plane at 50 degrees the blade bevel is only present to relieve the cut. This provides you with a very effective angle of attack suitable for all types of trenching work, and a router plane that is extremely easy to sharpen. Easy to sharpen Because the blades

50-degree straight blades

The MTC Large Router Plane is a unique router plane. Unlike many other router planes, the blade is made from a straight square section of HSS steel set bevel-down in the plane at 50 degrees - the blade bevel is only present to relieve the cut. This provides you with a very effective angle of attack suitable for all types of trenching work, and a router plane that is extremely easy to sharpen.

Easy to sharpen

Because the blades are made from a single piece of straight steel, the blades are very easy to sharpen. Simply remove the blade from the plane body, sharpen like you would a mortise chisel and then reset. No special jigs or equipment required! Watch your productivity grow with this versatile hand tool.

A range of blade widths

The MTC Large Router Plane is supplied with a 1/2in (12.7mm) wide blade. Additional blades are available in a range of widths both Metric and Imperial.

Metric blades available include these widths:

• 3.0mm
• 6.0mm
• 8.0mm
• 10.0mm
• 12.0mm

Imperial blades available include these widths:

• 1/8in
• 3/16in
• 1/4in
• 5/16in
• 3/8in
• 1/2in

M2 High Speed Steel blades

MTC has chosen M2 High Speed Steel (HSS) for the blades. M2 HSS has high abrasion resistance which means it will hold a sharp edge much longer than many other steels. This also means that it may take a little longer to bring up an edge. Don’t worry, you will be leaving your sharpening gear on the shelf for a lot longer too.