Tycon Systems 3 Port GigE 802.3af/at PoE Unmanaged Switch [TP-SW3G]

Tycon Systems 3 Port GigE 802.3af/at PoE Unmanaged Switch [TP-SW3G]The TP SW3G PoE 3 port Gigabit switch offered by Tycon Systems are fully automatic high speed Ethernet switches with up to 30W of PoE power per port. The unit accepts Gigabit data and power via PoE into the RJ45 PoE In port. The PoE In port is compatible with IEEE802. 3af, IEEE802. 3at and IEEE802. 3at 4 pair (60W). It can also accept 42 57VDC Passive PoE. There are two fully compliant 802. 3af at Gigabit PoE Out ports. These ports are capable of up

The TP-SW3G PoE 3 port Gigabit switch offered by Tycon Systems are fully automatic high speed Ethernet switches with up to 30W of PoE power per port. The unit accepts Gigabit data and power via PoE into the RJ45 “PoE In” port. The PoE In port is compatible with IEEE802.3af, IEEE802.3at and IEEE802.3at 4 pair (60W). It can also accept 42-57VDC Passive PoE. There are two fully compliant 802.3af/at Gigabit “PoE Out” ports. These ports are capable of up to 30W per port and 100m (330ft) distance.Multiple TP-SW3G can be strung together to provide effective distances up to about 300m depending on loads. No extra power is required as the units are powered over PoE.The units are compatible with Category 5 or higher Ethernet cables. The RJ45 connectors are shielded and grounded to the case. The units have 15kV surge protection on all Ethernet wires and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.

Product Features

• 3 Gigabit ports, easy plug and play operation

• Extends the range of PoE and Ethernet an additional 100 meters or more

• Compatible with IEEE802.3af and IEEE802.3at and IEEE802.3at 4 Pair (60W)

• No additional power supply is required

• Built-in surge protection

• Automatic MDI/MDI-X crossover

• Automatic speed and duplex sensing

• Low self power and high temperature operation

• CE and FCC certification

• Compact desktop or wall mount design and compatibly with DIN rail adapters

Product Applications

• Add another PoE and Data Port without running more Ethernet cable

• Extend Ethernet and PoE an additional 100 meters per each TP-SW3G

Product Specifications

• Ports: 1 data/PoE input and 2 data/PoE outputs, automatic crossover and polarity

• Transmission Speed: 1000 Mbps (Gigabit) / 100 Mbps / 10 Mbps auto-negotiation

• Connections: Shielded RJ45, grounded to case

• PoE Input Ports: Vin 44 VDC to 57 VDC, PoE Pinout: 1,2 (v-); 3,6 (V+) and/or 7,8 (V-); 4,5 (V+)

• PoE Output Ports: Out 42 VDC to 55 VDC, Pin assignment: V-(1,2), V(3,6)

• PoE Output Power: 30W per port Maximum, 60W total

• PoE Compatibility: IEEE802.3af (PoE), IEEE802.3at (PoE+), 802.3at 4 Pairs (60W) High PoE

• PoE Protections: Over temperature, over current, short circuit

• Surge Protection: IEC6100-4-2 (ESD) ±15kV (air), ±8kV (contact) ; IEC61000-4-4 (EFT) 40A (5/5ns)

• Self Consumption: < 1.5 Watt Typical

• LED's: Link (Green On), Activity (Green Blinking), PoE Detect (Yellow On)

• Switch Technology: Store and Forward

• Protocol: CSMA/CD

• Flow Control: IEEE802.3x (full-duplex), Back Pressure (half-duplex)

• Data Transmission Rate: 148800pps, 14880 pps

• Address Table: 1K MAC, self-learning

• Operating Temperature: -30 to +60°C (-22 to 140°F)

• Operating Humidity (RH): 5% - 90% (non condensing)

• Storage Temperature: -40 to +85°C (-40 to +185°F)

• Dimensions: 119 x 85 x 28 mm (4.7 x 3.3 x 1.1")

• Weight: 280g (9.9oz)

• Warranty: 2 Years

Product Includes

• (1) TP-SW3G

• (1) TP-POE-48G-WP (until stock lasts)