Pay in installments of $44.75 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 28 - Aug 2
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Yukon Gear Master Overhaul Kit For Model 20 DiffYukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts,
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon's Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1968-1970 | American Motors | AMX | Base |
| 1978-1979 | American Motors | Concord | Base |
| 1979 | American Motors | Concord | DL |
| 1979 | American Motors | Concord | Limited |
| 1977 | American Motors | Hornet | AMX |
| 1970-1971,1973-1977 | American Motors | Hornet | Base |
| 1971 | American Motors | Hornet | SC/360 |
| 1971-1977 | American Motors | Hornet | Sportabout |
| 1970-1972 | American Motors | Hornet | SST |
| 1971-1974 | American Motors | Javelin | AMX |
| 1968-1974 | American Motors | Javelin | Base |
| 1968-1972 | American Motors | Javelin | SST |
| 1970 | American Motors | Javelin | SST Mark Donohue |
| 1970 | American Motors | Javelin | SST Trans Am |
| 1971-1978 | American Motors | Matador | Base |
| 1974 | American Motors | Matador | Brougham |
| 1974 | American Motors | Matador | X |
| 1975-1978 | American Motors | Pacer | Base |
| 1979-1980 | American Motors | Pacer | DL |
| 1979-1980 | American Motors | Pacer | Limited |
| 2006 | Hummer | H1 | Alpha |
| 2002-2004 | Hummer | H1 | Base |
| 1976-1983 | Jeep | CJ5 | Base |
| 1977-1980 | Jeep | CJ5 | Golden Eagle |
| 1980-1983 | Jeep | CJ5 | Laredo |
| 1982-1983 | Jeep | CJ5 | Limited |
| 1976-1983 | Jeep | CJ5 | Renegade |
| 1976-1986 | Jeep | CJ7 | Base |
| 1977-1979 | Jeep | CJ7 | Golden Eagle |
| 1980 | Jeep | CJ7 | Golden Hawk |
| 1980-1983,1985-1986 | Jeep | CJ7 | Laredo |
| 1982-1983 | Jeep | CJ7 | Limited |
| 1976-1986 | Jeep | CJ7 | Renegade |
| 1976-1986 | Jeep | J10 | Base |
| 1981-1986 | Jeep | Scrambler | Base |
| 1985-1986 | Jeep | Scrambler | Laredo |
| 1985-1986 | Jeep | Scrambler | Renegade |
| 1982-1983 | Jeep | Scrambler | SL |
| 1982-1984 | Jeep | Scrambler | SR |
| 1979-1982,1984-1986 | Jeep | Wagoneer | Base |
| 1982-1983 | Jeep | Wagoneer | Brougham |
| 1979-1986 | Jeep | Wagoneer | Limited |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 8 reviews
Sort
Product Reviews
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
better then expected
Color: Black
very easy to put together works perfectly! very stable for the side would buy again!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026
★★★★★ 3
Divisor de habitaciones
Color: Black
La entrega fue perfecta , si debo de decir que en la descripción del producto decía que media 72 ancho x 72 alto pero no fue así su ancho es de 60 .
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 6, 2025
★★★★★ 5
Good purchase
Color: Black
We used this screen to divide the beds at a hotel. It gave the perfect privacy, was easy to put up and very sturdy
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 21, 2026
★★★★★ 1
Would not recommend
Color: Black
Product was terrible, it was not sturdy at all
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026