Pay in installments of $28.36 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 26 - Jul 31
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Kidde Slick 3x 2SFW Optical Smoke & 1x 3SFW Heat Alarm Kit Mains Powered with Alkaline Battery Back-UpKidde Slick 3x 2SFW Optical Smoke & 1x 3SFW Heat Alarm Kit Mains Powered with Alkaline Battery Back Up FULLY COMPLY WITH THE NEW 2022 SCOTTISH & WELSH REGULATIONS 3x Mains Powered Optical Smoke Alarm (2SFW): Mains Optical Smoke Alarm Features: Mains powered Optical smoke alarm from the Slick range of fast fit alarms that can be interconnected with up to 23 other Kidde and Firex mains alarms. Optional wireless capability using Wireless Alarm Base (RF
Kidde Slick 3x 2SFW Optical Smoke & 1x 3SFW Heat Alarm Kit Mains Powered with Alkaline Battery Back-Up
FULLY COMPLY WITH THE NEW 2022 SCOTTISH & WELSH REGULATIONS
3x Mains Powered Optical Smoke Alarm (2SFW):
Mains Optical Smoke Alarm Features:
Mains-powered Optical smoke alarm from the ‘Slick’ range of fast-fit alarms that can be interconnected with up to 23 other Kidde and Firex mains alarms.
Optional wireless capability using Wireless Alarm Base (RF-SFTP) for wire-free interconnection.
The ‘Slick’ range requires installation by a professionally qualified electrician and complies with UK Building Regulations for new housing and associated standards (Grade D, BS5839, Part 6).
- Unique fast-fit system with separate base plate, for ease of fitting and maintenance
- Integral, double-decker screwless terminal block for fast, push-fit connection
- Auto reset after activation
- Separate Test and Hush buttons to test and temporarily silence nuisance alarms
- Alkaline back-up battery provides continuous operation in the event of mains failure
- Interconnectable with other Kidde mains smoke and heat alarms and Kidde mains CO alarms using ‘Smart Interconnect’ technology
- Tamper-resistant locking device – prevents unauthorised removal without the use of a tool
- Wireless capability – use with optional Wireless Alarm Base (RF-SFTP) for RF interlink function
- Deep Base – allows easier wiring
Mains Optical Smoke Alarm Specification:
- Model 2SFW
- Power Supply 230V mains
- Temperature Range 0ºC to +40ºC
- Humidity Range Up to 93% Relative Humidity (RH) non-condensing
- Storage and Transport -20ºC to +60ºC and 5–95% relative humidity (RH) non-condensing
- Alarm Dimensions 135 x 135 x 60mm (including ‘Slick’ mounting base)
- Alarm Weight 280g
- Warranty 10 years
- Approvals BSI certified to BS EN14604:2005
- CE tested and certified
- Associated Standard BS 5839 Part 6 Grade D
- Sensor Optical chamber with insect-resistant width slot entry inlet portals
- Chamber Size 41mm outside diameter x 16mm approximate depth (external)
- Sensitivity Complies with BS EN14604:2005
- Detection Band infrared light wavelength
- Button Test Simulates the effect of smoke within the sensing chamber, checks electronics and sounder
- Automatic Self-test Circuitry is tested every 40 seconds and unit beeps if fault is detected
- Supply Voltage 230V AC, 50 Hz (nominal UK voltage)
- Power Consumption Maximum 80mA
- Battery Back-up User-replaceable alkaline 9V battery (MX1604)
- Battery Monitoring Battery is monitored and unit emits a single chirp every 40 seconds if a fault is present
- Low Battery Warning 30-day low battery indicator
- Power-on Indicator Continuous green LED
- Alarm Sounder Electronic piezo-electric sounder (T3 pattern sound - three pulses - space - three pulses)
- Sound Output 85dB (A) minimum at 3 metres
- Alarm Frequency 3.2 kHz typical
- Alarm Status Red LED flashes rapidly, typically once every 2/3 seconds = unit sensing a fire event
- Red LED flashes once every 10 seconds = unit in hush condition, auto reset after 7 minutes
- Red LED flashes once every 35 seconds = normal quiescent operation
- Interconnection Up to 24 units (smoke, heat and CO) can be hardwire interconnected using SMART® interconnect system with optional control (see below)
- Up to 15 units can be wireless interconnected using appropriate Wireless Base RF-SFTP
- Optional Controls Wireless Base Remote Test and Hush Unit (KN-RTH-RF) when used with Wireless Base
- Fixing ‘Slick’ mounting deep base as supplied
- Base Cable Connect. Screwless Terminal Block with slot release feature for conductors
1x Mains Powered Heat Alarm (3SFW):
Mains Heat Alarm Features:
Mains powered heat alarm from the ‘Slick’ range of fast-fit alarms that can be interconnected with up to 23 other Kidde and Firex mains alarms.
Optional wireless capability using Wireless Alarm Base (RF-SFTP) for wire-free interconnection.
The ‘Slick’ range requires installation by a professionally qualified electrician and complies with UK Building Regulations for new housing and associated standards (Grade D, BS5839, Part 6).
- Unique fast-fit system with separate base plate, for ease of fitting and maintenance
- Integral, double-decker screwless terminal block for fast, push-fit connection
- Auto reset after activation with latching LED allowing the initiating alarm to be identified
- Separate Test and Hush buttons to test and temporarily silence nuisance alarms
- Alkaline back-up battery provides continuous operation in the event of mains failure
- Interconnectable with other Kidde mains smoke and heat alarms and Kidde mains CO alarmsusing ‘Smart Interconnect’ technology
- Tamper-resistant locking device – prevents unauthorised removal without the use of a tool
- Wireless capability – use with optional Wireless Alarm Base (RF-SFTP) for RF interlink function
- Deep Base – allows easier wiring
Mains Heat Alarm Specification:
- Model 3SFW
- Power Supply 230V mains
- Temperature Range 0ºC to +40ºC
- Humidity Range Up to 93% Relative Humidity (RH) non-condensing
- Storage and Transport -20ºC to +60ºC and 5–95% relative humidity (RH) non-condensing
- Alarm Dimensions 135 x 135 x 70mm (including ‘Slick’ mounting base)
- Alarm Weight 274g
- Warranty 10 years
- Approvals BSI certified to BS5446 Part 2:2003
- CE tested and certified
- Associated Standard BS 5839 Part 6 Grade D
- Sensor Thermistor (Thermal resistor) within detection unit
- Sensitivity Complies with BS 5446 Part2:2003, as a Class A2 device, alarms between 54ºC and 70ºC
- Button Test Simulates the effect of heat at the sensor, checks electronics and sounder
- Automatic Self-test Circuitry is tested every 40 seconds and unit beeps if fault is detected
- Supply Voltage 230V AC, 50 Hz (nominal UK voltage)
- Power Consumption Maximum 80mA
- Battery Back-up User-replaceable alkaline 9V battery (MX1604)
- Battery Monitoring Battery is monitored and unit emits a single chirp every 40 seconds if a fault is present
- Low Battery Warning 30-day low battery indicator
- Power-on Indicator Continuous green LED
- Alarm Sounder Electronic piezo-electric sounder (T3 pattern sound - three pulses - space - three pulses)
- Sound Output 85dB (A) minimum at 3 metres
- Alarm Frequency 3.2 kHz typical
- Alarm Status Red LED flashes rapidly, typically once every 2/3 seconds = unit sensing a fire event
- Red LED double flashes every 30 seconds = unit is triggering unit (press test button to unlatch)
- Red LED flashes once every ten seconds = in hush condition (auto-reset after 7 minutes)
- Red LED flashes once every 35 seconds = normal quiescent operation
- Interconnection Up to 24 units (smoke, heat and CO) can be hardwire interconnected using SMART® interconnect system with optional control (see below)
- Up to 15 units can be wireless interconnected using appropriate Wireless Base RF-SFTP
- Optional Controls Wireless Base Remote Test and Hush Unit (KN-RTH-RF) when used with Wireless Base
- Fixing ‘Slick’ mounting deep base as supplied
- Base Cable Connect. Screwless Terminal Block with slot release feature for conductor
Please note: Alarms are sold individually.
Data Sheet:
Data Sheet for 2SFWData Sheet for 3SFW
Instruction Manual:
Instruction Manual for 2SFWInstruction Manual for 3SFW
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 7 reviews
Sort
Product Reviews
★★★★★ 5
Quality shrink tubing.
Size: 4.8mm (3/16") - 26Ft, Color: Black
This seems to be solid quality shrink tubing, shrinks well, and holds firmly. I have used it for a few projects so far and am happy with how it has performed. The package is larger than I expected, but keeps the tubing from being damaged from bends/kinks.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 7, 2026
★★★★★ 5
Amazing shrinking polymer technology= my growing review.
Size: 12.7mm (1/2") - 13Ft, Color: Black, Size: 12.7mm (1/2") - 13Ft, Color: Black
I recently tried out the TKDMR Heat Shrink Tubing, and it has proven to be a game-changer in my cable management endeavors! As an OCD handyman who values organization and neatness, I was on the lookout for a reliable solution to streamline my cable/wire setups, and this product exceeded my expectations in everyway.
*Ease of shrink (5/5):*
One of the best features of the heat shrink tubing is its ease of application. The tubing is remarkably pliable, easy to cut and straightforward to work with. The simple process involves sliding the tubing over the cable and applying heat, whether from a heat gun, lighter or even a hairdryer! The tubing quickly shrinks snugly around the cable, providing a tight and professional-looking finish. Even for those new to DIY cable management, the learning curve is minimal.
*Versatility (5/5):*
I was pleasantly surprised by the versatility of this heat shrink tubing. It accommodated various cable sizes and shapes, making it a versatile solution for a range of applications. Whether dealing with computer cables, audio cords, electrical box wiring or even small electronic components, the tubing adapted to the different sizes seamlessly. The only slight drawback is that extreme size differences between cables might require different tubing sizes for an optimal fit, This tubing is rather large, but shrinks very small when done carefully. I have fixed many action figures and dinosaurs' broken arms to the delight of my son!
*Durability (5/5):*
Once applied, the heat shrink tubing forms a durable and resilient layer around the cables. It provides an added layer of thick protection against water, wear/tear, etc. safeguarding cables from potential damage due to friction, bending, or exposure. This durability is incredibly beneficial for long-term use and in environments where cables may be subject to constant movement or handling. Especially useful for reinforcing phone charging cords! I'm looking at you cheap apple cords.
*Looks (5/5):*
Beyond its practical usage, TKDMR Heat Shrink Tubing significantly enhances the aesthetics of cable management. The tubing creates a sleek and uniform appearance, concealing multiple cables into a tidy bundle. The matte finish looks professional and modern, elevating the overall visual appeal of any setup. It's a small detail that makes a big difference, especially for those who value a clean and organized workspace, or computer cable management!
*Value for your hard earned Money (5/5):*
Considering the improvement it brings to cable management and the quality of the product, this Heat Shrink Tubing offers excellent value for money. The quantity provided in each package is generous, ( a little goes a long way) and the overall durability ensures that one application will last for years. While the initial cost may be slightly higher than alternative cable management solutions like zip ties etc., the long-term protection benefits make it a worthwhile investment.
*Overall Impressions:*
TKDMR Heat Shrink Tubing has proven to be a highly effective and reliable solution for many purposes. Its ease of shrink, versatility, durability, and aesthetic enhancements make it a awesome product in the market. Whether you're a tech enthusiast, DIY enthusiast, or just someone looking to tidy up your living or working space, this heat shrink tubing is a must-have! Not to mention the satisfying process of shrinking tubes onto wires.
I recommend this heat shrink tubing to anyone seeking a practical and visually pleasing solution for cable organization/wiring maintenance!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 8, 2023
★★★★★ 5
Works as advertised!
Great product, great price well worth the price!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 6, 2026
★★★★★ 4
Heat shrink tubing
Size: 8mm (5/16") - 26Ft, Color: Black
Good product , average price
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 25, 2026
★★★★★ 5
Wire insulation
worked great
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
recommand products
2.00ct Radiant Lab Grown Diamond (Colour G, Clarity VS1, IGI Certified)
283.50
Tumbleweed - Art Gallery Fabric - TBW65611 - Little Jewel Star Valley
33.00
Milkflo 3 Teat Compartment Calf Feeder
100.95
Commander Cody - Claiming New Territories: Live At The Aladin 1980
21.99
Vintage “54 Models” Playing Card Set
29.00