B10 E12 LED Bulbs 4W 2700K Warm White - 40W Equivalent, Dimmable - 12 Pack

B10 E12 LED Bulbs 4W 2700K Warm White - 40W Equivalent, Dimmable - 12 Pack4W B10 E12 Dimmable LED Candle Bulb (40W Equivalent) 2700K Warm White Key Features Bulb Shape: B10 Base Type: E12 Candelabra Power Consumption: 4W Incandescent Equivalent: 75W Light Output: 440 lumens Color Temperature: 2700K (Soft White) Color Rendering Index (CRI): >85 Voltage Range: 75V 130V Beam Angle: 270 degrees Dimmable: Yes, compatible with most LED dimmers Construction: Clear glass with filament design Replaces Cross Reference Part Numbers

4W B10 E12 Dimmable LED Candle Bulb (40W Equivalent) - 2700K Warm White

Key Features

• Bulb Shape: B10
• Base Type: E12 Candelabra
• Power Consumption: 4W
• Incandescent Equivalent: 75W
• Light Output: 440 lumens
• Color Temperature: 2700K (Soft White)
• Color Rendering Index (CRI): >85
• Voltage Range: 75V - 130V
• Beam Angle: 270 degrees
• Dimmable: Yes, compatible with most LED dimmers
• Construction: Clear glass with filament design

Replaces / Cross-Reference Part Numbers

• Replaces 40W, 60W, and 75W incandescent B10 or C10 bulbs with an E12 base.
• Serves as an LED alternative for B10 bulbs from brands including Feit Electric, MaxLite, and Euri.

Compatibility & Fitment

• Fits all standard E12 candelabra base sockets.
• Suitable for use in chandeliers, wall sconces, decorative lamps, and enclosed fixtures.
• Engineered for standard North American electrical systems (75V-130V).
• For dimming functionality, use with a compatible LED dimmer switch is required.

When to Replace

• Existing bulb has burned out or fails to illuminate.
• Persistent flickering or audible buzzing from the current bulb.
• Significant reduction in brightness from the original output.
• Upgrading from incandescent bulbs to improve energy efficiency.

Installation Tips

• Turn off power to the light fixture at the switch or circuit breaker before installation.
• Allow the previous bulb to cool completely before touching it.
• Handle the new bulb by its base to keep the glass clean.
• Screw the bulb into the socket until it is snug. Do not overtighten.
• After installation, restore power and test the bulb's functionality.