951-0171 751-0171 Fuel Shut Off Valve & 735-0149 935-0149 Gas Tank Grommet - Fits MTD Troy-Bilt Toro Craftsman Portable

951-0171 751-0171 Fuel Shut Off Valve & 735-0149 935-0149 Gas Tank Grommet - Fits MTD Troy-Bilt Toro Craftsman Portable951 0171 751 0171 Fuel Shut Off Valve Key Features Controls fuel flow from the tank to the carburetor. Designed for a 33 64 inch fuel tank hole. Material composition is not compatible with fuel containing greater than 10% ethanol. Provides a positive seal to prevent fuel leaks when shut off. Kit often includes a fuel tank bushing and may include a fuel line and filter. Replaces Cross Reference Part Numbers Valve: 951 0171, 751 0171 Bushing: 735 0149,

951-0171 751-0171 Fuel Shut Off Valve

Key Features

• Controls fuel flow from the tank to the carburetor.
• Designed for a 33/64 inch fuel tank hole.
• Material composition is not compatible with fuel containing greater than 10% ethanol.
• Provides a positive seal to prevent fuel leaks when shut off.
• Kit often includes a fuel tank bushing and may include a fuel line and filter.

Replaces / Cross-Reference Part Numbers

• Valve: 951-0171, 751-0171
• Bushing: 735-0149, 935-0149
• Oregon: 07-392

Compatibility & Fitment

• Fits equipment with a 33/64" (approximately 0.515") fuel tank outlet hole.
• Compatible with select generator models, including Coleman Powermate 4200 and 5000 series.
• Fits various outdoor power equipment from brands such as MTD, Cub Cadet, Craftsman, and Bolens.

When to Replace

• Visible fuel leakage from the valve body or around the tank bushing.
• Valve is stuck and will not turn to the open or closed position.
• Bushing has become cracked, brittle, or swollen from fuel exposure.
• Inconsistent fuel delivery causing the engine to stall or run rough.

Installation Tips

• Drain all fuel from the tank before beginning work.
• Clean the area around the fuel tank hole to prevent debris from entering the tank.
• Apply a small amount of oil to the new bushing to ease insertion into the tank.
• Ensure the valve is fully seated in the bushing to create a proper seal.
• After installation and refilling the tank, check for leaks before starting the engine.