Black Metal Complex Wood Dye Powder - 1oz, 28g

Black Metal Complex Wood Dye Powder - 1oz, 28gTo dissolve in water we recommend using hot, but not boiling, water. Always start by putting the water into a suitable glass, plastic (HDPE) or ceramic container, and then gradually add the powder. Stir the solution while adding, and then stir occasionally over the course of 10 15 minutes to ensure all powder is dissolved. Allow to cool before use. To dissolve in alcohol we recommend our Shellac & Aniline Thinners, which are a Synthetic Methanol

To dissolve in water we recommend using hot, but not boiling, water. Always start by putting the water into a suitable glass, plastic (HDPE) or ceramic container, and then gradually add the powder. Stir the solution while adding, and then stir occasionally over the course of 10-15 minutes to ensure all powder is dissolved. Allow to cool before use. To dissolve in alcohol we recommend our Shellac & Aniline Thinners, which are a Synthetic Methanol solvent. Alternatively Methanol (wood alcohol) or denatured alcohol can be used, but these are not as effective. Always start by putting the solvent into a suitable glass, plastic (HDPE) or ceramic container, and then gradually add the powder. Stir the solution while adding, and then stir occasionally over the course of 30-60 minutes to ensure all powder is dissolved. If dissolved in alcohol the dye can be added to our nitrocellulose lacquer to tint it. If doing this, strain the solution before adding to ensure no undissolved lumps enter into the lacquer and your spray equipment. Using a 75:25 mixture of Shellac & Aniline Thinners and Acetone can help to dissolve the solution in to nitrocellulose lacquer. The mixed stain can be applied to wood with a sponge, cloth or brush. These 14g (1/2oz) packets will create: 1 litre of normal strength stain 2 litres of wash coat 1/2 litre of concentrated stain