SKU: 7464444826

CARLI 2017-2024 FORD F250/F350 SUPER DUTY PROGRESSIVE ADD-A-PACKS

$15879.15 $17643.50
Save 10%
No.2 Bestseller on martinetexier.com >

Pay in installments of $4410.88 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 28 - Aug 2

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

CARLI 2017-2024 FORD F250/F350 SUPER DUTY PROGRESSIVE ADD-A-PACKSFits 2017, 2018, 2019, 2020, 2021, 2022, 2023 F250 F350 Leveled The Progressive add a pack replaces the lower overload springs on the factory pack. This is the 1" thick leaf that doesnt follow the contour of the rest of the pack. In removing this spring wall and replacing it with a mini progressive leaf pack, the capacity of the truck remains unchanged, as its determined by the factory springs, while the progression of the rear spring rate becomes

Fits 2017, 2018, 2019, 2020, 2021, 2022, 2023 F250/F350

�

Leveled-

The Progressive add-a-pack replaces the lower overload springs on the factory pack. This is the 1" thick leaf that doesn�t follow the contour of the rest of the pack. In removing this spring �wall� and replacing it with a mini progressive leaf pack, the capacity of the truck remains unchanged, as it�s determined by the factory springs, while the progression of the rear spring rate becomes substantially more predictable. The engagement and disengagement of the spring becomes quite a bit smoother increasing both ride quality and traction. As the �wall� was removed, the rear may sit lower with a heavy load BUT it will ride better loaded.

That said, the rear of the Super Duty can be outfitted with a replacement Full Progressive Spring Pack (reduces capacity to a �light� �-ton) or this factory leaf-pack modifying Progressive Add-a-Pack. This is where the F250 and F350 are a bit different. Since 2008, the main spring packs on these two trucks is different; the F250 has a lighter rate spring pack than its 350 counterpart. The F250 Add-a-Pack equipped systems are a nice improvement over stock; the F350 with the Add-a-Pack is still very stiff (in some cases, more so than stock) in the rear as the main pack doesn�t move much unless loaded. For this reason, we DO NOT recommend these be installed on an F350.

For optimal ride quality, we recommend the Full Replacement Leaf Spring packs for both trucks but especially the F350 given the super-stiff factory springs. Note that this will require high-end shocks tuned for the lighter rate leaf springs (Backcountry or Pintop). If capacity is a concern, an aftermarket airbag system should be installed to compliment the Full Progressive Leaf Springs to restore the F350 capacity. In the 4.5"/5.5" Range, we offer our Long Travel Airbags. If 2.5"/3.5" height, we recommend a system that will allow the airbags to disconnect from the lower mount during suspension cycling to ensure you�re able to take advantage of all your rear suspension travel.

�

4.5" Lift

Carli's progressive rear add-a-packs are are a custom made proprietary design produced by Deaver Springs. This setup is designed to lift the rear of the truck to match a 4.5" system and is achieved using rear add a packs in conjunction with 2" rear blocks. These add a packs are designed to retain factory rear weight capacity while improving ride quality.

SPECIFICATIONS

-Designed for trucks with 4.5" of lift
-Custom built by Deaver Springs for Carli Suspension
-Designed to retain factory weight capacity without air bags

INCLUDES

-Pair of rear Carli Progressive Add-A-Packs
-U Bolts
-Rear Bump Stop Drops

�

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 7464444826

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 18 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
F
Fred
Omaha, US
★★★★★ 5
Stable, flexible in deployment configuration, creates true privacy and looks great.
Size: 3 Panel 12FT W
This is the second room divider panel I have installed, and there are several features about this one that I like much better than my older one. The fact that there are no gaps and that the material is thicker means you get more privacy or more hiding power, if you wish. My older divider has vertical spaces between each of the panels and the panels are half as wide as the Siebwin panels, so there are many vertical spaces. The Siebwin divider really creates privacy. Another feature that I really appreciate is that the legs are wider and stand off from the floor. On my older one the legs are flat and they're rather awkward to adjust because they create more drag on the floor. The feet on the older one also loosen if you turn them counter clockwise, so adjustments of configuration that require the feet to be moved are more complex. The older divider also must be deployed in a zig-zag fashion because he feet are not as wide, but this new one can be deployed and stable in a straight, an "N" shape or an arc. They are both the same length, but because the older one must be use in a zig-zag deployment it doesn't reach to the length of the new one. The Siebwin divider definitely costs more at $103.48, but it sports several features and advantages over the other brand, so it does a better job and is worth the extra cost.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
C
Computer
Grantham, US
★★★★★ 4
Easy to assemble, does the job, material is shiny nylon and shows creases, minor defects, sloppy
Size: 3 Panel 12FT W, Size: 3 Panel 12FT W
The Siebwin room divider is a good idea, and for the price, it mostly delivers on the intended functionality. I ordered the 12 foot, 3-panel version mainly to hide an unfinished basement storage area that had become an eyesore. It works well for that purpose and gives the space a cleaner appearance without spending the kind of money that more decorative dividers or custom partitions cost. If you need something temporary, portable, or mainly functional, this is a viable option. There are a few limitations that became obvious during setup and use. The first thing I noticed was that the weld quality on some of the metal poles is fairly sloppy. Once the cover is installed, you do not really see it, but up close, it does not look especially refined or professional. The blackout material also is not a matte canvas style fabric as I expected. It has more of a shiny nylon appearance, and the creases are fairly visible. Being that it’s more of a nylon, I’d be hesitant to try steaming it to remove the creases. However, the creases do not matter if you are using it in a basement, dorm, or shared room, but for photography, video work, or a professional office setting, the appearance could be disappointing. The fabric is thick enough, though. It blocks visibility well enough, but strong light behind it still shows through to some extent, nothing deal-breaking. Also, my fabric appeared to be slightly defective. The hook and loop strip on one of the bottom sections was off-center and couldn't be totally attached because it was lined up with one of the legs. I originally hoped to use this as a video backdrop, but I will probably end up replacing the fabric with a proper green screen or canvas material while continuing to use the frame itself. For now, it does a good job of covering my basement junk. Assembly was actually easier than I expected and took roughly 15 to 20 minutes. The longer vertical poles are tethered together similarly to tent poles, which made setup straightforward and fairly intuitive. The shorter horizontal pieces slide and snap together to the top and bottom of the vertical assembly. After each section is assembled, the divider panels connect together with metal plates and two knurled screws (at the top and bottom), so no tools are really required. A few screws were difficult to start because paint had gotten into the threads, but once they caught, they tightened down normally. The feet install with similar knurled fasteners and help keep the divider reasonably stable. One thing to watch for during setup is the fabric orientation. There is one arrow indicator in the middle of the fabric to indicate up. However, if you need another indicator, the smaller hook and loop strip goes on the bottom while the longer strip goes on top. I realized mine was upside down right before finishing and had to redo it. I wasn't difficult to redo, despite the defect in mine. The overall design is practical and easy to move around. I do like that the panels can fold and bend into different shapes depending on the space. The widened feet help stability, although when trying to stretch the fabric tight, I noticed the poles sometimes wanted to overlap slightly at the joints. Tightening everything helped somewhat, but it still happened occasionally. The divider feels adequate for normal indoor use, though I would not expect premium durability or luxury-level fit and finish at this price point. The entire device can also be easily disabled and stored in a tote if you need it completely out of the way. It comes with assembly instructions, but even if you didn’t have them, it’s easy to build without them (save a mistake or two). In terms of value, I think the Siebwin divider mostly matches its price. Around $100 gets you a large freestanding partition with decent usability and easy assembly, but there are compromises in materials, appearance, and refinement. The defects are also off-putting, but hopefully you won't have them. Higher-end room dividers can easily cost two or three times more, so some of the tradeoffs are expected. I also noticed cheaper alternatives online, but based on the quality here, I suspect those would probably have even more issues. For practical home use, temporary privacy, hiding storage areas, or separating shared spaces, this is a good option as long as expectations stay realistic.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
T
Trendy Tales
Whiting, US
★★★★★ 3
Works well but takes up more space than expected
Size: 2 Panel 8FT W, Size: 2 Panel 8FT W
This room divider does the job for creating a little extra privacy and was easy enough to set up. The panels feel decent quality and the wider feet help keep it more stable than some cheaper screens I’ve tried. My only issue is that it takes up a bit more room than I expected, especially with the feet sticking out. It’s still portable and folds away nicely, but definitely measure your space first. Overall it works well for separating a room or blocking off an area temporarily. i wish it came in other colors
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
K
Katrina Rhodes
Port Orchard, US
★★★★★ 5
Nice divider, serves it's purpose well!
Size: 3 Panel 12FT W
This room divider worked out very well for what I needed. I wanted a simple way to create a little more privacy and separation in a larger room without doing anything permanent, and this divider was an easy solution. The panels provide good coverage, and the black color gives it a clean, modern appearance that blends in nicely with different décor styles. Assembly was fairly straightforward, and once set up, the wider feet helped keep the divider stable on the floor. I was especially happy with how flexible the panels are to arrange. You can keep it mostly straight, angle it around furniture, or create a more enclosed private space depending on the layout you need. The material allows light to filter through slightly while still offering a noticeable sense of privacy. I’ve used it for separating a workspace area, but it would also work well in bedrooms, apartments, dorms, studios, or shared living spaces. Another plus is that it can be folded and moved without too much effort when you want to change the setup. Overall, this divider delivers a good balance of functionality, portability, and appearance. It’s a practical option for anyone needing temporary room separation without installing permanent walls or curtains.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
J
Jamie K.
Los Angeles, US
★★★★★ 5
Perfect for Adding Privacy to a Piano Studio
Size: 2 Panel 8FT W, Size: 2 Panel 8FT W
I Ordered the 2 Panel version which is way too big for my needs... that's on me. So keep in mind that the picture shows a fabric made for two panels only being used on one and hence it is not pulled tight; it would pull tight and not be so wrinkly if it was set up properly as two panels. The metal pools that make up the panels seem to be well made, stable, and of good quality. They were very easy to put together and they stand up tall with plenty of height. The appearance of it with the fabric on it isn't as elegant as it could be, but it still looks good enough. The material is plenty solid, not allowing light through it, and thereby making a solid barrier. I am using it to block the view out the studio door when a student is sitting at the piano to avoid distractions from the hallway. It will allow a student to enter the studio with our distracting the student who is at the piano.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026

recommand products

Providence 2 Drawer Bedside Table (Natural)
198.00
Haltech Wideband O2 Sensor NTK LZA08-H5
194.04
Steering Tie Rod End RareParts 26828
120.95
Stripe Zip Knit Ribbed Polo Shirt
101.50
beautiful Joan Hackett portrait 35m-4863
11.49