SKU: 89924672075

Edelbrock Perf RPM Cam and Lifters Kit Olds 350-403

$277.20 $308.00
Save 10%
No.2 Bestseller on martinetexier.com >

Pay in installments of $77.00 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 26 - Jul 31

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Edelbrock Perf RPM Cam and Lifters Kit Olds 350-403Edelbrock part #7112 Performer RPM Camshaft is designed for small block Oldsmobile 350 403 V 8 applications. This Edelbrock cam kit produced 397 HP & 400 ft lbs. of torque when used with #7111 intake and stock iron cylinder heads on a 350 engine. The camshaft works well with high performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno matched to Performer RPM manifolds for high

Edelbrock part #7112 Performer RPM Camshaft is designed for small-block Oldsmobile 350-403 V-8 applications. This Edelbrock cam kit produced 397 HP & 400 ft-lbs. of torque when used with #7111 intake and stock iron cylinder heads on a 350 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: - Duration @ .050 Intake: 224 degrees - Duration @ .050 Exhaust: 234 degrees - Lift @ Valve Intake: .496" - Lift @ Valve Exhaust: .520" - Lobe Separation: 112 Degrees - Intake Centerline: 107 Degrees - Idle Vacuum @ 1000 RPM's: 12"

  • Take the Guesswork Out of Camshaft Selection!

This Part Fits:

Year Make Model Submodel
1973-1975 Buick Apollo Base
1975 Buick Apollo SR
1973 Buick Centurion Base
1973-1977 Buick Century Base
1975-1977 Buick Century Custom
1976 Buick Century Indianapolis 500 Pace Car
1973-1975 Buick Century Luxus
1977-1979 Buick Electra 225
1980 Buick Electra Estate Wagon
1977-1980 Buick Electra Limited
1978-1980 Buick Electra Park Avenue
1977-1980 Buick Estate Wagon Base
1972 Buick GS Base
1972-1975,1977-1980 Buick LeSabre Base
1972-1973,1975-1978 Buick LeSabre Custom
1977 Buick LeSabre Custom Sport
1979-1980 Buick LeSabre Limited
1974 Buick LeSabre Luxus
1973-1977 Buick Regal Base
1976-1977 Buick Regal SR
1977-1980 Buick Riviera Base
1978 Buick Riviera LXXV Anniversary Edition
1979-1980 Buick Riviera S
1972 Buick Skylark 350
1972,1975-1977 Buick Skylark Base
1972 Buick Skylark Custom
1976-1977 Buick Skylark S
1975-1977 Buick Skylark SR
1972 Buick Sportwagon Base
1979-1980 Cadillac Eldorado Base
1979-1980 Cadillac Eldorado Biarritz
1979-1980 Cadillac Eldorado Cabriolet
1976-1980 Cadillac Seville Base
1978-1980 Cadillac Seville Elegante
1977-1978 Cadillac Seville Opera
1972-1975 Chevrolet Bel Air Base
1972 Chevrolet Biscayne Base
1972 Chevrolet Brookwood Base
1972 Chevrolet C10 Pickup Base
1972 Chevrolet C20 Suburban Base
1972 Chevrolet C30 Pickup Base
1972-1975 Chevrolet Camaro Base
1973-1975 Chevrolet Camaro LT
1972-1973,1975 Chevrolet Camaro RS
1972 Chevrolet Camaro SS
1972-1973 Chevrolet Camaro Z28
1972 Chevrolet Caprice Base
1973-1975 Chevrolet Caprice Classic
1975 Chevrolet Caprice Classic Sport
1973-1974 Chevrolet Caprice Estate
1972 Chevrolet Chevelle Base
1972 Chevrolet Chevelle Concours
1972 Chevrolet Chevelle Concours Estate
1973 Chevrolet Chevelle Deluxe
1972 Chevrolet Chevelle Greenbrier
1973 Chevrolet Chevelle Laguna
1973 Chevrolet Chevelle Laguna Estate
1975 Chevrolet Chevelle Laguna Type S-3
1972-1975 Chevrolet Chevelle Malibu
1974-1975 Chevrolet Chevelle Malibu Classic
1974-1975 Chevrolet Chevelle Malibu Classic Estate
1973 Chevrolet Chevelle Malibu Estate
1972 Chevrolet Chevelle Nomad
1972 Chevrolet Chevelle SS
1972-1975 Chevrolet El Camino Base
1975 Chevrolet El Camino Classic
1972-1974 Chevrolet El Camino Custom
1972-1974 Chevrolet El Camino SS
1972 Chevrolet G10 Van Base
1972 Chevrolet G10 Van Sportvan
1972 Chevrolet G20 Van Base
1972 Chevrolet G20 Van Sportvan
1972 Chevrolet G30 Van Base
1972 Chevrolet G30 Van Sportvan
1972-1975 Chevrolet Impala Base
1975 Chevrolet Impala Custom
1975 Chevrolet Impala Sport
1972 Chevrolet K10 Pickup Base
1972 Chevrolet K10 Suburban Base
1972 Chevrolet K20 Pickup Base
1972 Chevrolet K20 Suburban Base
1972 Chevrolet K30 Pickup Base
1972 Chevrolet Kingswood Base
1972 Chevrolet Kingswood Estate
1972-1974 Chevrolet Monte Carlo Base
1973-1974 Chevrolet Monte Carlo Landau
1973,1975 Chevrolet Monte Carlo S
1972-1975 Chevrolet Nova Base
1973-1975 Chevrolet Nova Custom
1975 Chevrolet Nova LN
1972 Chevrolet Townsman Base
1972 GMC C15/C1500 Pickup Base
1972 GMC C15/C1500 Suburban Base
1972 GMC C25/C2500 Pickup Base
1972 GMC C25/C2500 Suburban Base
1972 GMC C35/C3500 Pickup Base
1972 GMC K15/K1500 Pickup Base
1972 GMC K25/K2500 Pickup Base
1972 GMC K25/K2500 Suburban Base
1972 GMC K35/K3500 Pickup Base
1972-1975 GMC Sprint Base
1975 GMC Sprint Classic
1972-1974 GMC Sprint Custom
1975 GMC Sprint High Sierra
1975 GMC Sprint SP
1965-1969 Oldsmobile 442 Base
1957 Oldsmobile 88 Base
1957 Oldsmobile 88 Holiday
1957-1959 Oldsmobile 98 Base
1958-1959 Oldsmobile 98 Holiday
1977-1980 Oldsmobile 98 Luxury
1977-1980 Oldsmobile 98 Regency
1977-1980 Oldsmobile Custom Cruiser Base
1975,1977 Oldsmobile Cutlass 442
1965-1975,1980 Oldsmobile Cutlass Base
1980 Oldsmobile Cutlass Brougham
1977 Oldsmobile Cutlass Colonnade
1976-1977 Oldsmobile Cutlass Colonnade S
1972 Oldsmobile Cutlass Cruiser
1965-1967 Oldsmobile Cutlass Holiday
1980 Oldsmobile Cutlass LS
1968,1971-1977 Oldsmobile Cutlass S
1967 Oldsmobile Cutlass Turnpike Cruiser
1976-1977,1979 Oldsmobile Cutlass Vista Cruiser
1979 Oldsmobile Cutlass Vista Cruiser Brougham
1979-1980 Oldsmobile Cutlass Calais Base
1980 Oldsmobile Cutlass Cruiser Brougham
1979 Oldsmobile Cutlass Salon 442
1975-1977,1979 Oldsmobile Cutlass Salon Base
1979 Oldsmobile Cutlass Salon Hurst
1968-1977,1979-1980 Oldsmobile Cutlass Supreme Base
1977,1979-1980 Oldsmobile Cutlass Supreme Brougham
1976-1977 Oldsmobile Cutlass Supreme Colonnade
1974-1975 Oldsmobile Cutlass Supreme Cruiser
1975 Oldsmobile Cutlass Supreme Hurst
1976 Oldsmobile Cutlass Tiara Base
1968 Oldsmobile Delmont 88 Base
1968-1980 Oldsmobile Delta 88 Base
1968-1971 Oldsmobile Delta 88 Custom
1980 Oldsmobile Delta 88 Holiday
1969-1980 Oldsmobile Delta 88 Royale
1980 Oldsmobile Delta 88 Royale Brougham
1958-1964 Oldsmobile Dynamic 88 Base
1958-1964 Oldsmobile Dynamic 88 Holiday
1965-1966,1968-1972 Oldsmobile F85 Base
1966 Oldsmobile F85 Holiday
1957-1964 Oldsmobile Fiesta Base
1957 Oldsmobile Golden Rocket 88 Base
1973-1977 Oldsmobile Omega Base
1976-1977 Oldsmobile Omega Brougham
1977 Oldsmobile Omega Deluxe
1976 Oldsmobile Omega F85
1975 Oldsmobile Omega Salon
1976-1977 Oldsmobile Omega SX
1957 Oldsmobile Starfire Base
1957 Oldsmobile Starfire Holiday
1957-1960 Oldsmobile Super 88 Base
1957-1960 Oldsmobile Super 88 Holiday
1977-1980 Oldsmobile Toronado Brougham
1977 Oldsmobile Toronado XS
1980 Oldsmobile Toronado XSC
1977-1979 Oldsmobile Toronado XSR
1968-1975 Oldsmobile Vista Cruiser Base
1977-1980 Pontiac Bonneville Base
1977-1980 Pontiac Bonneville Brougham
1978-1980 Pontiac Bonneville Safari
1977-1980 Pontiac Catalina Base
1977-1980 Pontiac Catalina Safari
1976-1977 Pontiac Firebird Base
1976-1977 Pontiac Firebird Esprit
1976-1979 Pontiac Firebird Formula
1977-1979 Pontiac Firebird Trans Am
1975 Pontiac Grand Am Base
1975-1977 Pontiac Grand LeMans Base
1977 Pontiac Grand LeMans Safari
1976-1977 Pontiac Grand Prix Base
1977 Pontiac Grand Prix LJ
1977 Pontiac Grand Prix SJ
1977-1978 Pontiac Grand Safari Base
1975-1977 Pontiac LeMans Base
1977 Pontiac LeMans Safari
1975-1977 Pontiac LeMans Sport
1977 Pontiac Phoenix Base
1975-1977 Pontiac Ventura Base
1975 Pontiac Ventura Custom
1975-1977 Pontiac Ventura SJ
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 89924672075

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 20 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Todd C Blake
Lake Worth, US
★★★★★ 5
Great Banana Plugs!
Size: 6 Pairs / 12 pcs
These FosPower banana plugs work very well. I have used dozens of these great FosPower banana plugs over the years, and they definitely work as advertised. When comparing apples to apples (or bananas in this case....lol), all Banana plugs work virtually the same way, and these banana plugs are no different. Strip speaker wire, unscrew banana plug cover, loosen speaker wire retaining screw(s), insert speaker wire, tighten speaker wire retaining screw(s), screw on banana plug cover, and wallah, a secure/conductive speaker/amplifier wire connector is created. Albeit, some banana plugs require the speaker wire to be splayed over a hollow post, and then they are held down by a screw-on retainer/cover. However, I much prefer these FosPower dual retaining screw type of banana plugs for their speaker wire holding ability. I always use high quality 14 gauge OFC speaker wire with these FosPower banana plugs, and they work perfectly together. I have used these FosPower banana plugs with many different speaker and amplifier brands over the years, including Klipsch, Pioneer, Polk, Denon, Dayton Audio, and Fosi with no problems at all. They just work, and work well. I have never had a FosPower banana plug break, release the speaker wire or short out, in all of the years that I have used them. Yes, these FosPower banana plugs do fit rather tightly into the connectors, at first, on a lot of speaker and amplifier brands/models. However, after the initial "squeeze" the banana plugs will lossen up, and become easier to install and remove. However, they still retain their great holding ability even after the initial squeeze. In order to overcome this initial "tightness," I usually just stick the FosPower banana plugs into a connector of an old portable amplifier, before assembling them, in order to squeeze them before inserting them into their final speaker or amplifier destinations. This is especially useful when working in tight places, where there is not much room to work in order to push the FosPower banana plugs into their tight connections firmly. Overall, I highly recommend these FosPower banana plugs. I am currently using them all over the house and shop for home theater and music listening (and testing projects). Just be aware of the tight fit in some speakers and amplifiers. Also, the 2 very tiny speaker wire retaining screws can be a challenge sometimes. Just use a good standard blade jewelers screwdriver, and be careful not to remove the retaining screws all of the way or over-tighten them. Once these things are mastered, using these FosPower banana plugs becomes second nature. Have fun!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 28, 2024
S
Verified Purchase
Steve M Vedder
Omaha, US
★★★★★ 5
Great Product
Size: 6 Pairs / 12 pcs
These banana plugs have worked perfectly, no matter what gauge I have run in them, they work great. Easy assembly and great quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
P
Verified Purchase
PowerTripp
Natrona Heights, US
★★★★★ 4
The most legit banana plugs I could find on Amazon
Size: 6 Pairs / 12 pcs, Size: 6 Pairs / 12 pcs
NEW PREFACE:: I am kind of glad I first bought the horribly magnetic, horribly made and GOLD PAINTED Sewell crimp on plugs (some reviewers say that Sewell are better and easier to use than the FosPower, which is true in design, but in quality of materials FosPower beats them hands down!!) ... Changing from those to these FosPower plugs plus the Monoprice 90° plugs, I am flabbergasted at the difference they make in sound quality. I have heard people say that they can hear the difference and even as an audiophile I was skeptical..... but my skepticism has been completely erased by what I am hearing with my own ears. I waited a few days to make sure I wasn’t just tripping before updating this review 🤣....but it has become clear to me how much a difference plugs made from the right materials actually make!!! I am 100% serious that the bass coming out of my Polk Signature Series tower speakers has at least doubled at the same volume. I can also now turn the volume up Way past my max volume before, without any distortion and much more clarity and less harsh highs. Everything just sounds warmer in general now which is amazing!!!! This is dangerous info for me... because now I’m thinking about making some really nice custom wires to see how much of a difference that makes 🙄🙄🤣 OK onto the review of the actual plugs here~~ These seem like decent connectors. I can’t tell if they are brass or copper, but they only have a slight hint of a magnetic property when testing them with a very powerful magnet. I was easily able to fit x2 - 14ga wires into it for bi-wiring purposes, including screwing on the collar. (As seen in my example pic) The gold plating on the tips seems legit and not painted like some of the plugs from Sewell... I have tested and tried quite a few plugs from Amazon and most seem to be crap. These however hold up better than most! These and the Monoprice 90° banana plugs with the black and red rubber sleeves. The latter are gold plated copper and have zero magnetic properties. (if you need 90° banana plugs) UPDATE: still the best plugs I have found, but upon full install found two issues. One is a defect where a set of the plug threads for the barrel cover body weren’t cut right. The body’s do not tighten and stay loose because of that. Obvious issue for vibration with metal on metal... The other issue is that even though these say they can fit different gauge wires, they seem to be geared more towards 12 or 10 gauge. I am using semi solid strand 14 gauge and find that unless I fold the wire over to make it double thick, the bolts use up all the thread and seem to become kind of loose inside the body. They won’t fully seat and keep spinning no matter how much you tighten. They seem to stay secure still but I just wonder about longevity over time with vibrations. So I just doubled up the wire and they seated fine! Not the worst issue in the world, but just kind of a pain since you have to strip the wire longer than you normally would so you can fold it over. ANOTHER UPDATE: I had to remove these plugs from the wire to connect them to a crappy spring terminal amp while my better amp was in the shop. The issue I wrote about with the set screws "bottoming out" on smaller gauge wire became a more pronounced issue! I could not unscrew the set screws anymore and just had to cut the wires... So that means I will need to purchase more of these to replace the ones I cannot get wire back into. Not the best design, but still one of the best plugs I have found on Amazon.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 26, 2021
R
Verified Purchase
Russell B
Phoenix, US
★★★★★ 5
Sturdy. Tight fit. No wobble
Size: 2 Pairs / 4 pcs
These are the best ones I’ve found. This order will connect one wire. Luckily that’s what I needed. If you’re doing more than one wire…
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
E
Verified Purchase
Ed Train
Natrona Heights, US
★★★★★ 5
Superior Design!
Size: 6 Pairs / 12 pcs
Delivery was lightning fast. I tried a pack of two pairs of these banana jacks as a sample to see if these would meet my needs. The design of these plugs is superior. The design was exactly what I wanted because the speaker wire is secured with TWO set screws. Then I ordered an additional six pairs of plugs to hook up my subwoofer to my amp and speakers. (I feed the audio output from the amp to the sub. The sub has a crossover that keeps the low frequencies and sends the mid and treble frequencies to my bookshelf speakers.) I love the security of two set screws on each plug and love the barrel that screws on AFTER the wire is secured by the set screws. Most banana plugs have a hole through the shaft of the plug that receives the stripped wire. Then the barrel cover is screwed down to secure the wire in the plug. This design compresses the speaker wire but eventually the cap loses it grip and allows the connection between the wire and the plug to become loose. Then the transfer of the audio signal becomes poor and the speakers sound bad. Every month or two I needed to check all the banana plugs and re-tighten many of them for the best performance. The two set screws eliminate this problem. The set screws are quite small and take a little extra care in installation. You will need a small flat blade screwdriver to tighten them. I used the 1/8" flat blade driver from a set of jewelers screwdrivers. These well made plugs are a bit pricier that many of the banana plugs available but certainly not the priciest plugs available. For me, the slightly higher price was more than offset by the security of the wire within the plug. I'm not thrilled with the extra tight fit of the tip on the plugs into the jacks. It took a lot of effort to insert the in the jack. Actually I "greased" the pins (very sparingly) with with non-corrosion, conductive paste (Ox-Gard, No-Corrode, etc. Do NOT use any other grease.) Next time I'll use pliers to compress the pin. My only quibbles are that the spring pins that go into the jack are very tight and that the plugs are only sold in quantities of two pairs or 12 pairs. I recommend these banana plugs for all who are using the banana plugs and jacks for hooking up your speakers. It's a very convenient way of connecting speakers if your speakers and amplifier have the banana jack as part of the binding post. Further, it's much safer to use banana plugs since the possibility of shorting your amplifier with a stray strand of wire is practically zero. Easy Five Stars.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2018

recommand products

Mcquay-norris ES2909 OUTER Steering Tie Rod End
14.99
Mcquay-norris DS908 Sterring Drag Link For 80-91 Ford LTS LN LS LT LNT Series
199.99
Maxisafe With Metal Cap Knife Fully Automatic Retractable, 16 mm, Stainless Steel, Plastic Handle
38.50
Sure-Fit Floor Liner; Tan; Rear; 1 pc.;
149.80
HD Running Boards
399.33