Fox 38 Factory Grip X2 29" Fork

Fox 38 Factory Grip X2 29" ForkFive years in, the new 38 is once again upping the ante for Enduro and aggressive All Mountain fork performance. Learning from our design of the FOX Podium fork and its exemplary ride feel, we made the MY 27 38, 8. 8% stiffer foreaft and 6. 8% less stiff in torsion. The new 38 also increases its bushing overlap from 120mm to 140mm for the smoothest possible ride at high speed and under high impacts. Support Without Harshness GRIP X2 is the most

Five years in, the new 38 is once again upping the ante for Enduro and aggressive All-Mountain fork performance.
Learning from our design of the FOX Podium fork and its exemplary ride feel, we made the MY 27 38, 8.8% stiffer foreaft and 6.8% less stiff in torsion. The new 38 also increases its bushing overlap from 120mm to 140mm for the smoothest possible ride at high speed and under high impacts.

Support Without Harshness
GRIP X2 is the most tunable, supportive and smoothest descent-focused damper ever created by FOX. Sit higher in the travel, keep tires glued to the ground and corner with increased traction, all while reducing overall rider fatigue. 

High Stiffness. Low Friction
Using the learnings gained from the FOX Podium, we increased bushing overlap by 20mm to push the fore-aft stiffness by approximately 9% while reducing friction under load at high speed. The new arch optimizes torsional stiffness even further for steering responsiveness and handling.

Smooth Under Pressure
The seamlessly compliant FLOAT Glidecore air spring reduces friction and bind by moving with the fork under dynamic load. Large cross-section O-rings dampen and control this motion while also reducing breakaway friction of the air spring. The result? Smoother suspension action.

Features:

• New generative designed lower legs with 20mm
  increased bushing overlap for decreased friction
  and increased sensitivity
  
• Updated GRIP X2 and GRIP X Damper Options
  
• New Glidecore vertically and horizontally compliant
  air spring with MCU bottom-out bumper
  
• Updated bleeders and relocated bypass channels
  
• Uses same mud guard as 36 / 36 SL

Specifications:

• S, P-SE, and PS
  
• 160, 170, 180mm Travel
  
• 29" 
  
• 44mm Offsets
  
• 15 x 110 Floating Axle
  
• 180-230mm Brake Rotor
  
• 2.6" Max Tire Size
  
• PM200 - 29” (PM180 29”ABS) 
  
• MAX ROTOR 230
  
• ABS mount available
  
• Starting Weight: 2200g