Pay in installments of $41.11 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 26 - Jul 31
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Kidde Slick 5x 2SFW Optical Smoke & 1x 3SFW Heat Alarm Kit Mains Powered with Alkaline Battery Back-UpKidde Slick 5x 2SFW Optical Smoke & 1x 3SFW Heat Alarm Kit Mains Powered with Alkaline Battery Back Up FULLY COMPLY WITH THE NEW 2022 SCOTTISH & WELSH REGULATIONS 5x Mains Powered Optical Smoke Alarm (2SFW): Mains Optical Smoke Alarm Features: Mains powered Optical smoke alarm from the Slick range of fast fit alarms that can be interconnected with up to 23 other Kidde and Firex mains alarms. Optional wireless capability using Wireless Alarm Base (RF
Kidde Slick 5x 2SFW Optical Smoke & 1x 3SFW Heat Alarm Kit Mains Powered with Alkaline Battery Back-Up
FULLY COMPLY WITH THE NEW 2022 SCOTTISH & WELSH REGULATIONS
5x Mains Powered Optical Smoke Alarm (2SFW):
Mains Optical Smoke Alarm Features:
Mains-powered Optical smoke alarm from the ‘Slick’ range of fast-fit alarms that can be interconnected with up to 23 other Kidde and Firex mains alarms.
Optional wireless capability using Wireless Alarm Base (RF-SFTP) for wire-free interconnection.
The ‘Slick’ range requires installation by a professionally qualified electrician and complies with UK Building Regulations for new housing and associated standards (Grade D, BS5839, Part 6).
- Unique fast-fit system with separate base plate, for ease of fitting and maintenance
- Integral, double-decker screwless terminal block for fast, push-fit connection
- Auto reset after activation
- Separate Test and Hush buttons to test and temporarily silence nuisance alarms
- Alkaline back-up battery provides continuous operation in the event of mains failure
- Interconnectable with other Kidde mains smoke and heat alarms and Kidde mains CO alarms using ‘Smart Interconnect’ technology
- Tamper-resistant locking device – prevents unauthorised removal without the use of a tool
- Wireless capability – use with optional Wireless Alarm Base (RF-SFTP) for RF interlink function
- Deep Base – allows easier wiring
Mains Optical Smoke Alarm Specification:
- Model 2SFW
- Power Supply 230V mains
- Temperature Range 0ºC to +40ºC
- Humidity Range Up to 93% Relative Humidity (RH) non-condensing
- Storage and Transport -20ºC to +60ºC and 5–95% relative humidity (RH) non-condensing
- Alarm Dimensions 135 x 135 x 60mm (including ‘Slick’ mounting base)
- Alarm Weight 280g
- Warranty 10 years
- Approvals BSI certified to BS EN14604:2005
- CE tested and certified
- Associated Standard BS 5839 Part 6 Grade D
- Sensor Optical chamber with insect-resistant width slot entry inlet portals
- Chamber Size 41mm outside diameter x 16mm approximate depth (external)
- Sensitivity Complies with BS EN14604:2005
- Detection Band infrared light wavelength
- Button Test Simulates the effect of smoke within the sensing chamber, checks electronics and sounder
- Automatic Self-test Circuitry is tested every 40 seconds and unit beeps if fault is detected
- Supply Voltage 230V AC, 50 Hz (nominal UK voltage)
- Power Consumption Maximum 80mA
- Battery Back-up User-replaceable alkaline 9V battery (MX1604)
- Battery Monitoring Battery is monitored and unit emits a single chirp every 40 seconds if a fault is present
- Low Battery Warning 30-day low battery indicator
- Power-on Indicator Continuous green LED
- Alarm Sounder Electronic piezo-electric sounder (T3 pattern sound - three pulses - space - three pulses)
- Sound Output 85dB (A) minimum at 3 metres
- Alarm Frequency 3.2 kHz typical
- Alarm Status Red LED flashes rapidly, typically once every 2/3 seconds = unit sensing a fire event
- Red LED flashes once every 10 seconds = unit in hush condition, auto reset after 7 minutes
- Red LED flashes once every 35 seconds = normal quiescent operation
- Interconnection Up to 24 units (smoke, heat and CO) can be hardwire interconnected using SMART® interconnect system with optional control (see below)
- Up to 15 units can be wireless interconnected using appropriate Wireless Base RF-SFTP
- Optional Controls Wireless Base Remote Test and Hush Unit (KN-RTH-RF) when used with Wireless Base
- Fixing ‘Slick’ mounting deep base as supplied
- Base Cable Connect. Screwless Terminal Block with slot release feature for conductors
1x Mains Powered Heat Alarm (3SFW):
Mains Heat Alarm Features:
Mains powered heat alarm from the ‘Slick’ range of fast-fit alarms that can be interconnected with up to 23 other Kidde and Firex mains alarms.
Optional wireless capability using Wireless Alarm Base (RF-SFTP) for wire-free interconnection.
The ‘Slick’ range requires installation by a professionally qualified electrician and complies with UK Building Regulations for new housing and associated standards (Grade D, BS5839, Part 6).
- Unique fast-fit system with separate base plate, for ease of fitting and maintenance
- Integral, double-decker screwless terminal block for fast, push-fit connection
- Auto reset after activation with latching LED allowing the initiating alarm to be identified
- Separate Test and Hush buttons to test and temporarily silence nuisance alarms
- Alkaline back-up battery provides continuous operation in the event of mains failure
- Interconnectable with other Kidde mains smoke and heat alarms and Kidde mains CO alarmsusing ‘Smart Interconnect’ technology
- Tamper-resistant locking device – prevents unauthorised removal without the use of a tool
- Wireless capability – use with optional Wireless Alarm Base (RF-SFTP) for RF interlink function
- Deep Base – allows easier wiring
Mains Heat Alarm Specification:
- Model 3SFW
- Power Supply 230V mains
- Temperature Range 0ºC to +40ºC
- Humidity Range Up to 93% Relative Humidity (RH) non-condensing
- Storage and Transport -20ºC to +60ºC and 5–95% relative humidity (RH) non-condensing
- Alarm Dimensions 135 x 135 x 70mm (including ‘Slick’ mounting base)
- Alarm Weight 274g
- Warranty 10 years
- Approvals BSI certified to BS5446 Part 2:2003
- CE tested and certified
- Associated Standard BS 5839 Part 6 Grade D
- Sensor Thermistor (Thermal resistor) within detection unit
- Sensitivity Complies with BS 5446 Part2:2003, as a Class A2 device, alarms between 54ºC and 70ºC
- Button Test Simulates the effect of heat at the sensor, checks electronics and sounder
- Automatic Self-test Circuitry is tested every 40 seconds and unit beeps if fault is detected
- Supply Voltage 230V AC, 50 Hz (nominal UK voltage)
- Power Consumption Maximum 80mA
- Battery Back-up User-replaceable alkaline 9V battery (MX1604)
- Battery Monitoring Battery is monitored and unit emits a single chirp every 40 seconds if a fault is present
- Low Battery Warning 30-day low battery indicator
- Power-on Indicator Continuous green LED
- Alarm Sounder Electronic piezo-electric sounder (T3 pattern sound - three pulses - space - three pulses)
- Sound Output 85dB (A) minimum at 3 metres
- Alarm Frequency 3.2 kHz typical
- Alarm Status Red LED flashes rapidly, typically once every 2/3 seconds = unit sensing a fire event
- Red LED double flashes every 30 seconds = unit is triggering unit (press test button to unlatch)
- Red LED flashes once every ten seconds = in hush condition (auto-reset after 7 minutes)
- Red LED flashes once every 35 seconds = normal quiescent operation
- Interconnection Up to 24 units (smoke, heat and CO) can be hardwire interconnected using SMART® interconnect system with optional control (see below)
- Up to 15 units can be wireless interconnected using appropriate Wireless Base RF-SFTP
- Optional Controls Wireless Base Remote Test and Hush Unit (KN-RTH-RF) when used with Wireless Base
- Fixing ‘Slick’ mounting deep base as supplied
- Base Cable Connect. Screwless Terminal Block with slot release feature for conductor
Please note: Alarms are sold individually.
Data Sheet:
Data Sheet for 2SFWData Sheet for 3SFW
Instruction Manual:
Instruction Manual for 2SFWInstruction Manual for 3SFW
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 26 reviews
Sort
Product Reviews
★★★★★ 5
Great Multi-Function Watch
Color: Gray/Digital/Gray
I absolutely love my Timex Ironman watches. I have had many over a very long period of time.
Wonderful set of functions for the price.
Very affordable.
Easy to use. Lasts a long time. Very easy to read in standard lighting. I like the Indiglo when needed, but do not use it too often.
Absolutely love the ability to set a repeat timer to remind me to do something at a fixed interval, or to keep me on task for a fixed period of time.
Great to be able to set three independent alarms.
Potential to capture a huge number of splits with the stopwatch.
I purchased this watch to replace a similar model with a dead battery. I have replaced batteries in the past, but it is quicker and easier to buy a replacement watch. I am saving my old watches for that day in the future when the Ironman model may no longer be available. I expect this will be my watch of choice for the rest of my life.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 21, 2026
★★★★★ 5
Just fine if you have simple needs...
Color: Black/Digital/Black/Green
Exactly what I needed: a cheap, durable wrist watch. The only thing it was lacking were instructions, but about 5 minutes of messing with the buttons got it set up
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 19, 2026
★★★★★ 5
Nice watch
Color: Black/Digital/Black/Green
Good watch
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 30, 2026
★★★★★ 5
Amazing quality and well worth it!!!
Color: Black
Great watch! My son saw his friend have and was impressed so I got him one! This one doesn’t have a connection point from the band to the watch so it can’t break there which has been the issues with all his other watches. This is easy to setup and use! It worked so great that I got one for my other son! They both say the size and options are perfect! Highly recommend!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 14, 2026
★★★★★ 5
Great classic timepiece
Color: Black/Digital Gray/Silver-Tone, Color: Black/Digital Gray/Silver-Tone
I’ve been using the Timex Men’s Ironman Triathlon Classic 30 (38mm) for a while now, and it’s easily one of the most dependable watches I’ve owned. The design is simple but functional — lightweight, comfortable, and perfect for workouts, outdoor activities, or just daily wear.
The Indiglo backlight is super bright and makes it easy to read in the dark, and the buttons are responsive without feeling flimsy. The stopwatch and countdown timer features are straightforward and accurate, which I really appreciate for timing workouts. I also like that it’s water-resistant, so I never have to worry about it in the rain or while swimming.
The 38mm size is just right — not too bulky, but still sporty and easy to read. The battery life is excellent, and the Timex durability definitely shows; this watch can take a beating and still look good.
If you want something rugged, affordable, and practical, the Ironman Classic 30 is a solid choice. It’s a no-nonsense watch that does exactly what it’s supposed to — and does it well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 2, 2025
recommand products
All Balls Racing 16-21 Husqvarna 701 Enduro - Rear Brake Pedal Kit
61.92
Accelerator Pedal Sensor Standard Motor Parts APS578
235.38
ABS Wheel Speed Sensor Wiring Harness Standard Motor Parts ALH94
46.57
Ladelle Set of 4 Retreat Cotton Kitchen Tea Towels 50 x 70 cm Mix
34.95
Ladelle Base Navy Linen Look 100% Cotton Tablecloth 150 x 265 cm
92.00